Fundamentals of Heat and Mass Transfer
7th Edition
ISBN: 9780470501979
Author: Frank P. Incropera, David P. DeWitt, Theodore L. Bergman, Adrienne S. Lavine
Publisher: Wiley, John & Sons, Incorporated
expand_more
expand_more
format_list_bulleted
Concept explainers
Videos
Textbook Question
Chapter 11, Problem 11.14P
A shell-and-tube exchanger (two shells, four tube passes) is used to heat 10,000 kg/h of pressurized water from35 to 120°C with 5000 kg/h pressurized water enteringthe exchanger at 300°C. 1f the overall heat transfer coefficient is 15
Expert Solution & Answer
Want to see the full answer?
Check out a sample textbook solution
Students have asked these similar questions
Q1] A shell and tube heat exchanger is used to heat water (C = 4236 J/kg. °C) from 80°C
to 150°C at a rate of 12.5 kg/s by hot gas that enters the exchanger at 350°C with a rate of
20.36 kg/s. The overall heat transfer coefficient is 290 W/m² °C. The gas making 2-shell
passes and the water making 4-tube passes. Calculate the heat transfer surface area
(Cp (gas) = 1.04 kJ/kg.°C).
heat flux: (a) by
2. A concentric counterflow heat exchanger is used to cool oil by water. The oil flow rate is 0.1 kg/s and enters at 100 C. Water enters at 30 C and a flow rate of0.2 kg/s. The heat transfer area is 5.223 m2 and the overall heat transfer coefficient is 37.8 W/m2·K. Find the rate of heat transfer and exit temperatures. Data: Cp,h = 2131 J/kg·K and Cp,c = 4178 J/kg·K. [Ans.: Q = 8524 W, Tho = 60 C, and Tco = 40 C].
In general, heat exchangers with higher flow rates have greater capacities?
Chapter 11 Solutions
Fundamentals of Heat and Mass Transfer
Ch. 11 - In a fire-tube boiler, hot products of combustion...Ch. 11 - A shell-and-tube heat exchanger is to heat an...Ch. 11 - A steel tube (k=50W/mK) of inner and outer...Ch. 11 - A heat recovery device involves transferring...Ch. 11 - A novel design for a condenser consists of a tube...Ch. 11 - The condenser of a steam power plant...Ch. 11 - Thin-walled aluminum tubes of diameter D = 10mmare...Ch. 11 - A tinned-tube, cross-how heat exchanger is to use...Ch. 11 - Water at a rate of 45,500kg/h is heated from 80...Ch. 11 - A novel heat exchanger concept consists of a...
Ch. 11 - Prob. 11.12PCh. 11 - A process fluid having a specific heat of...Ch. 11 - A shell-and-tube exchanger (two shells, four tube...Ch. 11 - Consider the heat exchanger of Problem 11.14....Ch. 11 - The hot and cold inlet temperatures to a...Ch. 11 - A concentric tube heat exchanger of length L = 2 m...Ch. 11 - A counterflow, concentric tube heat exchanger is...Ch. 11 - Consider a concentric tube heat exchanger with an...Ch. 11 - A shell-and-tube heat exchanger must be designed...Ch. 11 - A concentric tube heat exchanger for cooling...Ch. 11 - A counterflow, concentric tube heat exchanger used...Ch. 11 - An automobile radiator may be viewed as a...Ch. 11 - Hot air for a large-scale drying operation is to...Ch. 11 - In a dairy operation, milk at a flow rate of 250...Ch. 11 - The compartment heater of an automobile...Ch. 11 - A counterflow, twin-tube heat exchanger is made...Ch. 11 - Consider a coupled shell-in-tube heat exchange...Ch. 11 - For health reasons, public spaces require the...Ch. 11 - A shell-and-tube heat exchanger (1 shell pass, 2...Ch. 11 - Saturated water vapor leaves a steam turbine at a...Ch. 11 - The human brain is especially sensitive to...Ch. 11 - Prob. 11.47PCh. 11 - A plate-tin heat exchanger is used to condense a...Ch. 11 - In a supercomputer, signal propagation delays...Ch. 11 - Untapped geothermal sites in the United States...Ch. 11 - A shell-and-tube heat exchanger consists of 135...Ch. 11 - An ocean thermal energy conversion system is...Ch. 11 - Prob. 11.55PCh. 11 - Prob. 11.56PCh. 11 - The chief engineer at a university that is...Ch. 11 - A shell-and-tube heat exchanger with one shell...Ch. 11 - Prob. 11.59PCh. 11 - Prob. 11.60PCh. 11 - Prob. 11.61PCh. 11 - Prob. 11.62PCh. 11 - A recuperator is a heat exchanger that heats air...Ch. 11 - Prob. 11.64PCh. 11 - Prob. 11.65PCh. 11 - A cross-flow heat exchanger consists of a bundle...Ch. 11 - Exhaust gas from a furnace is used to preheat the...Ch. 11 - Prob. 11.68PCh. 11 - A liquefied natural gas (LNG) regasification...Ch. 11 - Prob. 11.70PCh. 11 - A shell-and-tube heat exchanger consisting of...Ch. 11 - Prob. 11.73PCh. 11 - The power needed to overcome wind and friction...Ch. 11 - Prob. 11.75PCh. 11 - Consider a Rankine cycle with saturated steam...Ch. 11 - Consider the Rankine cycle of Problem 11.77,...Ch. 11 - Prob. 11.79PCh. 11 - Prob. 11.80PCh. 11 - Hot exhaust gases are used in a...Ch. 11 - Prob. 11.84PCh. 11 - Prob. 11.90PCh. 11 - Prob. 11S.1PCh. 11 - Prob. 11S.2PCh. 11 - Prob. 11S.3PCh. 11 - Solve Problem 11.15 using the LMTD method.Ch. 11 - Prob. 11S.5PCh. 11 - Prob. 11S.6PCh. 11 - Prob. 11S.8PCh. 11 - Prob. 11S.10PCh. 11 - Prob. 11S.11PCh. 11 - A cooling coil consists of a bank of aluminum...Ch. 11 - Prob. 11S.17P
Additional Engineering Textbook Solutions
Find more solutions based on key concepts
Assume the following vectors are already defined: V1=[302]V2=[214]V3=[5131]V4=[0.50.10.20.2] For each of the fo...
Thinking Like an Engineer: An Active Learning Approach (4th Edition)
Locate the centroid of the area. Prob. 9-17
Engineering Mechanics: Statics
Consider a subsonic compressible flow in cartesian coordinates where the velocity potential is given by (x,y)=V...
Fundamentals of Aerodynamics
3.3 It is known that a vertical force of 200 lb is required to remove the nail at C from the board. As the nail...
Vector Mechanics for Engineers: Statics
A windowmounted air conditioner removes 3.5kJ from the inside of a home using 1.75 kJ work input. How much ener...
EBK FUNDAMENTALS OF THERMODYNAMICS, ENH
A 20-lb force is applied to the control rod AB as shown. Knowing that the length of the rod is 9 in. and that t...
Statics and Mechanics of Materials
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.Similar questions
- Geothermal heat pumps, or water-source heat pumps, are classified as either _____loop or _____loop systems.arrow_forwardAn adiabatic heat exchanger is used to heat cold water át 8 C entering at a rate of 3 kg/s by hot air at 150 C entering also at rate of 3 kg/s. If the exit temperature of hot air is 30 C, the exit temperature of cold water is which of the following: (use constant specific heats evaluated at 300 K). 128.4 C O28.6 C O 31.2 C 36.9 C O 149.7 Carrow_forwardA fruit juice is being heated in an indirect heat exchanger using steam as a heating medium. The product fl ows through the heat exchanger at a rate of 1500 kg/h and the inlet temperature is 20C. Determine the quantity of steam required to heat the product to 100C when only latent heat of vaporization (2200 kJ/kg) is used for heating. The specifi c heat of the product is 4 kJ/(kg C).arrow_forward
- Q3// a saturated steam is to be condensed at a temperature of 50 °C to produce a saturated water. The cooling water is drawn from a nearby lake, and enters the tubes of the condenser at 18 °C and leaves it at 27 °C. The surface area of the tubes is 58m and the overall heat transfer coefficient is 2400 W/m.°C. Assuming counter flow, determine: 1. The mass flow rate of the cooling water needed. 2. The rate of steam condensation. 3. The effectiveness of this condenser. Answer :( 99.9 kg/s, 1.57717 kg/s ,28.3%)arrow_forwardSteam 90°C 10. A shell-and-tube process heater is to be selected to heat water (Cp = 4190 J/kg-°C) from 20°C to 90°C by steam flowing on the shell side. The heat transfer load of the heater is 600 kW. If the inner diameter of the tubes is 1 cm and the velocity of water is not to exceed 3 m/s, determine how many tubes need to be used in the heat exchanger. 20°C Waterarrow_forwardA body-and-tube heat exchanger with 2 shells and 8 tubes is used to heat ethyl alcohol (cp=2670J/kg.°C) from 25 °C to 70 °C with a flow rate of 2.1 kg/s in pipes with a diameter of 3 cm. Heating It is made with water that enters the body at 95 °C and leaves at 60 °C (cp=4190J/kg.°C). If the total heat transfer coefficient is 800 W/m2.°C, calculate the total length of the heat exchanger using the Ɛ-NTU method.arrow_forward
- A well-insulated, thin-walled, counterflow heat exchanger is to be used to cool oil (cp = 2.20 kJ/kg.oC) from 150 to 40oC at a rate of 2 kg/s with water (cp = 4.18 kJ/kg.oC) that enters at 22oC at a rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, and its length is 6 m. Determine (a) the rate of heat transfer and (b) the rate of exergy destruction in the heat exchanger.arrow_forwardIn a large air-conditioning application, 1500 m3/min of air at 1 atm and 10◦C are tobe heated in a finned-tube heat exchanger with hot water entering the exchanger at 80◦C. The overall heat-transfer coefficient is 50 W/m2 · ◦C. Calculate the requiredarea for the heat exchanger for an exit air temperature of 37◦C and exit water temperature of 48◦Carrow_forwardA heat exchanger is to heat water (cp = 4.18 kJ/kgoC) from 25 to 60oC at a rateof 0.2 kg/s. The heating is to be accomplished by geothermal water (cp = 2.09 kJ/kgoC) available at 140oC at a mass flow rate of 0.3 kg/s. Determine the rate of heattransfer (kW) in the heat exchanger and the exit temperature (oC) of geothermalwater and the exit temperature of the well steam in the heat exchanger.arrow_forward
- A heat exchanger is heating water on the tube side with steam condensing on the shell side. The water is entering at 45 0 F and exiting at 175 0 F. No instruments are available for measuring the tube side water flow but condensed steam from the shell side is being collected at a rate of 43 GPM. If the tube area of the exchanger is 350 Ft2 , and the overall heat transfer coefficient clean was 900 BTU/Hr.Ft2 F0, how much has the overall heat transfer coefficient changed, if at all? Note: Latent heat for water/steam at 212 0 F is 970 BTU per pound of water. A gallon of water weighs 8.34 lbs.arrow_forward2. A heat exchanger like that is used to heat an oil in the tubes (c = 1.9 kJ/kg °C) from 15-C to 85 °C. Blowing across the outside of the tubes is steam that enters at 130-C and leaves at 110°C with a mass flow of 5.2 kg/sec. The overall heat-transfer coefficient is 275 W/m² °C and c for steam is 1.86 kJ/kg C. Calculate the surface area of the heat exchanger (Holman, 2002). 130 85 Steam Oil 110arrow_forwardA heat exchanger is used to cool oil (with cp = 2.2 kJ/kg.°C) from 170 to 50°C by water (with cp = 4.18 kJ/kg.°C) that enters the heat exchanger at a rate of 2 kg/s and inlet temperature of 10°C. If the flow rate of the oil is 1.5 kg/s, determine the exit temperature of water and the heat transfer rate from the oil.arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
Principles of Heat Transfer (Activate Learning wi...Mechanical EngineeringISBN:9781305387102Author:Kreith, Frank; Manglik, Raj M.Publisher:Cengage Learning
Refrigeration and Air Conditioning Technology (Mi...Mechanical EngineeringISBN:9781305578296Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill JohnsonPublisher:Cengage Learning
Principles of Heat Transfer (Activate Learning wi...
Mechanical Engineering
ISBN:9781305387102
Author:Kreith, Frank; Manglik, Raj M.
Publisher:Cengage Learning
Refrigeration and Air Conditioning Technology (Mi...
Mechanical Engineering
ISBN:9781305578296
Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson
Publisher:Cengage Learning
How Shell and Tube Heat Exchangers Work (Engineering); Author: saVRee;https://www.youtube.com/watch?v=OyQ3SaU4KKU;License: Standard Youtube License