M Whet = 50 kg (k) wheut =0.15 m 2) The 50-kg wheel is connected to a 10-kg block as shown. The block is moving downward with a speed of 2.4 m/S, and suddenly, friction between the wheel and ground was applied, and caused the block to decelerate at 10.0 m/ S. A) Draw the FBD and KD for the wheel alone, and show all external and effective forces on these diagrams. B) Calculate the angular acceleration of the wheel. 0.5 m H=0.5 Ma = 10 kg 0.2 m C) Assuming the wheel has angular acceleration of 25 rad/ S find the acceleration vector of the center of mass of the wheel. ( Vaih = 2.4 m/S

M Whet = 50 kg (k) wheut =0.15 m 2) The 50-kg wheel is connected to a 10-kg block as shown. The block is moving downward with a speed of 2.4 m/S, and suddenly, friction between the wheel and ground was applied, and caused the block to decelerate at 10.0 m/ S. A) Draw the FBD and KD for the wheel alone, and show all external and effective forces on these diagrams. B) Calculate the angular acceleration of the wheel. 0.5 m H=0.5 Ma = 10 kg 0.2 m C) Assuming the wheel has angular acceleration of 25 rad/ S find the acceleration vector of the center of mass of the wheel. ( Vaih = 2.4 m/S

Name: May get help with this question. It's from Dynamic course.Thanks in ad
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: May get help with this question. It's from Dynamic course.Thanks in advance. M Whet = 50 kg(k) wheut =0.15 m2) The 50-kg wheel is connected to a 10-kgblock as shown. The block is movingdownward with a speed of 2.4 m/S, andsuddenly, friction between t

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The two blocks started at rest. The surface of the inclined plane is frictionless. (note: neglect mass and friction of the pulley) Given: Weight of A=230 lb. Weight of B=300 Ib. Calculate: a) acceleration of A (ft/s"), 30° with the horizontal b) Acceleration of B (ft/s"), downward c) the tension in the cable (Ib.) B 30°
Q3: As shown in figure, find that at what distance body A will attain a velocity of 3 m/s from A 2000 N when starts rest. Assume coefficient of friction as 0.2 for block and and pulleys frictionless and weightless. surface are 3) DOM www N 00
A 5-kg block is acted on a 30-N Tensile force that acts 40 degrees from the horizontal. The kinetic coefficient of friction is 0.25. What is the acceleration of the block? Draw the FBD of the given.
The mass of the A gear is 10 kg and the turning radius is 200 mm. Of gear Bits mass is 3kg and the turning radius is 80 mm. When the system is stationary to gear B. Moment of 6 N.m is applied. By neglecting friction; a) The time elapsed until the angular velocity of gear B reaches 600 rpm.b) Find the tangential force from gear B to gear A.
Q3: A frozen-juice can rests on the horizontal rack of a freezer door as shown. With what maximum angu- lar velocity a can the door be "slammed" shut against its seal and not dislodge the can? Assume that the can rolls without slipping on the corner of the rack, and neglect the dimension d compared with the 500-mm distance. Ans. 1.135 rad/s 500 mm 35 mm 7 mm
Use 3 decimal places The 250-N block rests upon a level plane for which fk = 0.2. It is pulled by force P = 100N inclined at 20o with the horizontal. 1. Find the velocity of the block after it moves 20m starting from rest. 2. If the 100-N pull is then removed, find the distance the block will travel.
Use 3 decimal places The 250-N block rests upon a level plane for which fk = 0.2. It is pulled by force P = 100N inclined at 20o with the horizontal. 1. If the 100-N pull is then removed, find the distance the block will travel. 2. Find the velocity of the block after it moves 20m starting from rest.
In the figure above, blocks A and B have 50 and 10 kg respectively. It is given that thecoefficients of friction between all surfaces of contact are static friction=0.4 and kinetic friction=0.3.a) If P=0, determine the acceleration of B and the tension in the chord?b) If P=10, determine the acceleration of B and the tension in the chord?c) If P=100, determine the acceleration of B and the tension in the chord?
pls send me answer of this question all the parts pls and i will rate you sure, pls solve a,b,c and d and also a and b A 200-kg dragster (racing car) exerts a constant force of 4000 N during a race. The coefficient of kinetic friction between the tires and the pavement is .15. If the drag strip is 1000 m long, determine:a. The net force on the dragster. b. The acceleration of the dragster. c. The time it takes for the dragster to finish the race.d. The dragster's velocity at the end of the race.The dragster now needs to slow down, so it opens a parachute. The force of air drag is 3500 N. The driver also locks the brakes of the dragster, and the coefficient of kinetic friction becomes .75. Determine:a. How long it will take to stop the dragster.b. The distance the dragster travels while stopping.
Use 3 decimal places. A body weighing 2,225N is being dragged along a rough horizontal plane by a pull of 445N directed at 18o from the horizontal. If fk = 1/12, find the velocity required from rest in the first 3.650m.
Consider the following diagram. m1=20 kg and m2= 10 kg. The system is being pulled by an applied force of 200 N. directed 50" above the horizontal. The coefficient of kinetic friction between the block and the surface is u-0.2. 50 m, 20kg Coefficient of friction 4=0.2 10 kg. 309 7) Calculate the acceleration of the system. Your answer 8) Calculate the magnitude of the Tension on the rope. Your answer N 00
A block of mass m = 3.1 kg is placed on a rough incline surface making an angle 0 = 27.7. with horizontal. A force F parallel to the ground is applied to the block. Due to the applied force the block moved x = 0.53 meter along the inclined surface with constant speed. If the inclined surface has kinetic friction coefficient uk = 0.23 what is the work done by the friction force? Provide your answer with 2 decimal places. Take g = 9.81 m/s2 HK