Please go for all in handwritten format.[All these are easy one's ,So Solve all] Water at 27°C is flowing with a meanvelocity of 0.20 m/s through a 451-m-long cast iron pipe of 0.15-m insidediameter.Physical Properties Mathematical FunctionsStep 1What is the value for the viscosity, in N-s/m²?Save for LaterN-s/m²Attempts: unlimited Submit AnswerStep 2What is the value for the surface roughness, , inm?Save for Later Last saved 1 second ago.Saved work will be auto-submitted on the due date. Auto-submission can take up to 10 minutes. Step 3What is the Reynolds number?Rep =Save for LaterStep 4x Your answer is incorrect.What is the value of the friction factor?f = i 0.0261Save for LaterStep 5What is the pressure drop in the pipe, in bar?Ap=eTextbook and MediaSave for LaterbarAttempts: unlimited Submit AnswerAttempts: unlimited Submit AnswerAttempts: unlimited Submit Answer

Given: T=27oc v=0.20 m/s L=451 m D=0.15 m

Water at 27°C is flowing with a mean velocity of 0.20 m/s through a 451-m- long cast iron pipe of 0.15-m inside diameter. Physical Properties Mathematical Functions Step 1 What is the value for the viscosity, in N-s/m2? Save for Later N-s/m² Attempts: unlimited Submit A Step 2 What is the value for the surface roughness, ., in m?

Water at 27°C is flowing with a mean velocity of 0.20 m/s through a 451-m- long cast iron pipe of 0.15-m inside diameter. Physical Properties Mathematical Functions Step 1 What is the value for the viscosity, in N-s/m2? Save for Later N-s/m² Attempts: unlimited Submit A Step 2 What is the value for the surface roughness, ., in m?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water at temperature of 20 °C is flowing inside a straight, smooth pipe with flow rate of 0.05 m3/h . With which pipe diameter will the flow transition from laminar to turbulent? Kinematic viscosity of water at 20 °C is 1.005·10-6 m2/s. Round off the answer to one decimal digit in cm, but enter the answer without the unit.
Figure 0 shows the change in density of a newtonian fluid with temperature, ing/m^3.Falling spere experiments give average times of 0.2s @ 10 c and 0.23s @ 20 cUsing the equation u=K(ps-pf)tWhere K is found to be 1.34Ps=2300 kg/m3Calculate the viscosity of the fluid at 20 c and 10 c
The flow rate of water in a garden hose is measured using the bucket-andstopwatch method. Filling a 5-L bucket takes 75 seconds. If the inner diameter of the hose is 10 mm and the density and viscosity of water are approximately 998 kg m-3 and 0.9 cP, respectively, (a) is the flow inside the hose laminar or turbulent? (b) If the flow rate is adjusted such that the flow is with Re = 2100, how long would it take to fill the same bucket?
From the viscosity expriment: · Calculate the value of the viscosity coefficient and its propagated error where ( slope =122 cm-1 · s-land its error = 15.42 cm~1.s-1) (ps = 7.86g/cm3 and PL = 0.88 g/cm3)
Example: Water has a coefficient of viscosity of 0.001 Pa/s. What pressure difference is necessary to keep water moving with a volume flow rate of 0.015m³/s through a 3 m long pipe with a radius of 2 cm. What do you understand under the answer?
Two plates are separated by 30 mm space. The lower plate moves at velocity of 2 m/s while the upper plate ered moves at a velocity of 8 m/s. Oil (S-0.41) which fills the space. The oil viscosity is equal to 0.003 m /s. The variation in velocity of the oil is linear. What is the shear stress in the oil (N/m2)? upper plate stion 8 m/s OIL 30 mm 2 m/s lower plate
1. A unknown 30°C liquid (S.G. = 0.85) flows into a surface which creates a shear stress of 0.20 N/m2 and velocity gradient of 16.8 s-1. What is the kinematic viscosity of the liquid? Express answer in exponential notation w/ 4 significant digits. 2. A unknown fluid at 20ºC fills the follow portion of a sleeve with a inner diameter of 11.8 cm and has a fixed coaxial cylinder of diameter 11.6 cm which rotates at 120 rpm. The torque generated is 23.40084214 N∙m per meter of rod length. What is the fluid used and its kinematic viscosity?
what is the relationship between the fluid viscosity and the drag force Fdrag?
The Reynolds number is defined for a pipe as (velocity· diameter· density) / viscosity. What isthe Reynolds number for water flowing at 10 ft/ s in a pipe with a diameter of 6 in? What are itsdimensions?
It is desired to determine the surface tension of a particular fluid using a capillary-riseexperiment. Kienth used a 0.5 mm glass tube and found that the height of the liquidmeasured 30 mm with a contact angle of 30°. Kienth then performed viscosity measurements using an Ostwald viscometer. He found that the fluid takes 1.5 times slowerto flow through the viscometer relative to water with a density of 1000 kg/m? and aviscosity of 1.0 cP. It is previously known that the viscosity of the fluid is 1.35 cP. Whatis the surface tension of the liquid?
1. A unknown 30°C liquid (S.G. = 0.85) flows into a surface which creates shear stress of 0.20 N/m2 and a velocity gradient of 16.8 s-1. What is the kinematic viscosity of the liquid? Express answer in exponential notation w/ 4 significant digits.
a pipe of diameter 60 mm is subjected to an oil flow at rate of 343.5 kg/s. the mass density and viscosity of oil is 900 kg/m' and 0.9 Pa-sec. the length of pipe is 100. Determine the Pressure gradient in kPa/m. (A) 18 (B) 32 (C) 36 16 Answer A B O D