The AB and BC prismatic gates are made of different materials, and both gates are hinged at point B. Mass of gate AB is 850 kg, whereas mass of gate BC is [(25 x k) + 750] kg. The liquid on top of the gates is oil, which has a specific mass of pa = [750 + (12 x k)] kg/m?. The length of the system (perpendicular to the figure) is B=1 m. The length of the system (perpendicular to the figure) is B=1 m. Calculate the maximum value of h with the gates kept closed (i.e. remain horizontal). (Gates are made of homogeneous materials, and the thickness d can be neglected.) (k=5) Su (Water) Su Yağ (Oil) (Water) в 1.0m 0.5 m

The AB and BC prismatic gates are made of different materials, and both gates are hinged at point B. Mass of gate AB is 850 kg, whereas mass of gate BC is [(25 x k) + 750] kg. The liquid on top of the gates is oil, which has a specific mass of pa = [750 + (12 x k)] kg/m?. The length of the system (perpendicular to the figure) is B=1 m. The length of the system (perpendicular to the figure) is B=1 m. Calculate the maximum value of h with the gates kept closed (i.e. remain horizontal). (Gates are made of homogeneous materials, and the thickness d can be neglected.) (k=5) Su (Water) Su Yağ (Oil) (Water) в 1.0m 0.5 m

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter9: Moments And Products Of Inertia Of Areas

Section: Chapter Questions

Problem 9.40P

See similar textbooks

Similar questions

The system in the figure is open to 1 atm on the right side. (a) If L = 120 cm, what is the pressure in container A? (b) Conversely, if pA = 135 kPa, what is the length L? Copyright © McGraw-Hill Education. All rights reserved. No reproduction or distribution without the prior written consent of McGraw-Hill Education. Air 15 cm 32 cm Mercury с 18 cm D 35° Water
The piston shown in figure is held in equilibrium by the pressure of the gas flowing through the pipe. The pressures pi = 350 kPa, pi = 130 kPa, and pressure of the gas p = 210 kPa. Find the mass of the piston. Ans: 80.1 kg
The blood pressure in your heart is 1.52 x104 Pa. If an artery in the brain is 0.421 m above the heart, what is the pressure in the artery?
Find the density of an oil filled in the liquid column as shown in figure. Given that absolute pressure at the bottom is 500 kPa, atmosphere pressure is 1.0132 bar. where X=4m; Y = 4m, Z=1.5m. The density of the oil = (unit in kg/m3) =
The gate in the Figure A is subjected to water pressure on one side and to air pressure on the other side. Determine the value of x for which the gate will rotate counter clockwise if the gate is rectangular with dimension of 1.5 m x 0 m
You are being asked to determine the heights in tubes B and C (relative to z=0) given the following information: The specific weight of Air is Pair = 11.9N/m3 The specific weight of glycerine is Paiye = 12355N/m3 The specific weight of gasoline is Pgas = 6677N/m3 The gauge pressure at A is Pa = 1.6kPa The height of the tank of air is a = 1.7m The height of the tank of gasoline is y = 1.6m The height of the tank of glyercin is k = 0.95m A в с xm Air y m Gasoline k m Glycerin z = 0 As a HINT, you do not need to know the specific elevations of the tubes B and C entering their respective fluids, but you do need to account for this. Input the height the fluid rises in B to 2 decimal places here: (in metres) Input the height the fluid rises in C to 2 decimal places here: (in metres)
L1 = 12.0 cm L3 = 5.0 cm Oil L2 10.8 cm Water Problem 2: A glass tube containing oil is inserted into a tank of water, as shown in the figure. Using the data on the figure, calculate the oil density. Assume the water temperature is 10 °C
An open cylindrical tank with the curved portion restraining a body of static fluid as shown in the plot below. The fluid in the tank is water. The room temperature is T=[t] 20 °C. The height from the free surface to the beginning of the curved surface is H= 3.00m. The The shape of the curved surface is a quarter circle.The radius of the circle is R= 1.70m. The width of the cylindrical tank w= 1.3 m (perpendicular to the screen). Answer the questions based on conditions provided. Horizontal distance to the centroid of the rectangular area (A1) above the curved surface from the right boundary of the curved surface, x1 ___________ (m)
A pneumatic tube system is used in a hospital to quickly transport laboratory samples across the building. A cylindrical canister (radius r = 12.5 cm, mass m = 950 g) containing the sample is placed in a tube with roughly the same radius. The bottom of the tube is exposed to atmospheric pressure, but the portion of the tube above the canister is maintained at a slightly lower pressure, which sucks the canister into the tube. For the questions below, use 101,325 Pa for atmospheric pressure, and maintain 6 significant figures on your numerical answers. What absolute pressure P must be maintained in the portion of the tube above the canister in order to keep the canister stationary? (For simplicity, assume that the tube is coated with a non-stick surface so that friction can be ignored). What is the gauge pressure above the canister in the scenario described above? If tube system operator lowers the absolute pressure found in part (a) by 1.00%, then what is the acceleration of the…
The piston shown in figure is held in equilibrium by the pressure of the gas flowing through the pipe. The pressures pi = 350 kPa, pii = 130 kPa, and pressure of the gas pII = 210 kPa. Find the mass of the piston. Ans: 80.1 kg
1. Find the density of an oil filled in the liquid column as shown in figure. Given that absolute pressure at the bottom is 675 kPa, atmosphere pressure is 1.0132 bar. where X=4m; Y = 4m, Z=1.5m. (Enter only the values in the boxes by referring to the unit given in the bracket. Do not send the hand written answer sheets to my mail) water oil Y Mercury The density of the oil = (unit in kg/m3) = %3D
The field storage tank is filled with oil. The standpipe is connected to the tank at C' and open to the atmosphere at E. Suppose that h1 = 9 ft , h2 = 4 ft, h3 = 8 ft . The oil has a density of Po = 1.78 slug/ft³. Assume that there is no air trapped in the tank, that the top of the tank at B is closed. (Figure 1) Figure 1 of 1 B 4 ft E hị F h3 C h2 A Determine the maximum gage pressure that can be developed in the tank. Express your answer to three significant figures and include the appropriate units. Where does this maximum pressure occur? O Level A O Level B O Level C O Level D O Level E