short-shunt compound generator has armature, shunt field and series field resistances of 0.5 Ω, 156 Ω, and 0.465 Ω respectively. If it supplies a load of 9 kW at a terminal voltage of 241 V, calculate the generated emf in volt.

short-shunt compound generator has armature, shunt field and series field resistances of 0.5 Ω, 156 Ω, and 0.465 Ω respectively. If it supplies a load of 9 kW at a terminal voltage of 241 V, calculate the generated emf in volt.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.16P: A single-phase, 120V(rms),60Hz source supplies power to a series R-L circuit consisting of R=10 and...

See similar textbooks

Related questions

Q: A short-shunt compound generator delivers a load current of 30 A at 220 V, and has armature,…

Q: A 230V, shunt generator has Ra = O.07 π and Rf = 77.5 - 16 π. The generator has a total mechanical…

A: We are authorized to answer two subparts at a time, since you have not mentioned which part you are…

Q: 18. The external characteristic of a shunt generator can be obtained directly from its -…

A: 18..>> The external characteristic of shunt generator can be obtained by directly from its…

Q: A 30-kVA, 230-V, 50-Hz, star-connected, 3-phase salient-pole synchronous generator supplies load at…

A: We are authorized to answer three subparts at a time, since you have not mentioned which part you…

Q: The line-to-neutral excitation voltage

Q: A long shunt compound generator is rated 22 kW at 220 V. Its armature, series field, and shunt field…

Q: a) A three-phase, 11 kV, 50 Hz, four poles delta-connected synchronous generator has an armature…

Q: A 690 KVA, 4200-V, 60 Hz, 0.9 PF lagging, Delta-connected, 8- pole synchronous generator has an…

A: Given, A 690 KVA, 4200-V, 60 Hz, 0.9 PF lagging, Delta-connected, 8- pole synchronous generator has…

Q: A 8 pole wave wound shunt generator delivers 205A at a terminal voltage of 200V. Ra and Rsh are…

A: Disclaimer: Since you have asked multipart questions, we will solve the first three subpart for…

Q: A 10-kVA, 380-V, 60-Hz, 2-pole, three-phase, Y-connected, synchronous generator delivers the rated…

A: Synchronous generator: It is also called as alternator. It is used to convert the mechanical energy…

Q: A 19 kVA, 419 V, 50-Hz, 3-φ, star-connected synchronous generator gave the following test data :

Q: 50 MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3-phase, steam-turbine generator has…

A: In this question , we will find maximum output power of generator..

Q: A 10 pole wave wound shunt generator delivers 200A at a terminal voltage of 245V. Ra and Rsh are…

A: Armature current =load current +shunt field current. Current per parallel path = total armature…

Q: 7. For a resistance split-phase motor, the effective impedance of the main and auxiliary windings…

A: The solution is given below This problem is from single phase induction motor.

Q: A 45-MVA, 41.57-kV, three-phase round-rotor synchronous generator has a synchronous reactance of 9…

A: The Generating system is given as Generator rating are given asS=45MVA,VLrated=41.57kV,Since, load…

Q: A 3-phase, 200 MVA, 44 kV, 50 Hz synchronous generator is operating under no load and excited to…

A: Given, Power rating of the synchronous generrator= 200 MVAVoltage rating of the ynchronous…

Q: A 3-phase, 50MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected steam-turbine generator has…

A: In this question we need to find a reactive power state whether it is absorbed or supplied by the…

Q: A separately excited d.c.generator has no load voltage of 120 V at field current of 2 A, when driven…

A: GivenV=Eg1=120 vfield current If1=2 Aspeed N1=1500 r.p.mseperately excited generator is operating on…

Q: .150KVA, 440 V, 50 Hz, star-connected diesel generator has armature reaction 1.6 S2 when it is…

A: Star Connection: A way of connecting polyphase circuits in which one end of each phase line is…

Q: A 2-pole, 50 Hz, 11 kV synchronous generator with a rating of 120 MW and 0.87 lagging power factor…

A: Question: A 2-pole, 50 Hz, 11 kV synchronous generator with a rating of 120 MW and 0.87 lagging…

Q: A 381 V, 50 Hz, Y-connected, eight poles synchronous generator has the OC given in tabular form…

A: Given data, f=50 HzP=8

Q: B) A 3-phase, 1500 kVA, 13.2 kV Y-connected synchronous generator, is supplying a real power of 120…

A: b..>> The machine is delivering kVARs to Load. So the machine is over exited. So the field…

Q: 02. Assume that a 10 MVA, 13.8 kV (line), 3-phase, Y-connected AC generator has R= 0.05 Q per phase…

Q: A 50 kW, 200 V differentially compounded generator has NSE of 10 turns, NF of 3000 turns, and Rr of…

A: From the question, it is given thatP= 50 kWV=200 VNSE=10 TurnsFinding IIi=PV=50×103200=250…

Q: B) A 3-phase, 1500 kVA, 13.2 kV Y-connected synchronous generator, is supplying a real power of 120…

A: In this question we need to choose a correct option.

Q: A 3-phase, 2-pole, round-pole, star-connected synchronous generator with a synchronous reactance of…

A: Given data about a 3-phase star connected round pole synchronous generator: Number of poles P=2.…

Q: A 3 Ф, 10 kVA, 400 V, star-connected synchronous generator has an armature resistance of 0.8 Ω per…

Q: A 690 KVA, 4200-V, 60 Hz, 0.9 PF lagging, Delta-connected, 8- pole synchronous generator has an…

A: A generator is an electrical machine which converts mechanical energy to electrical energy. It is…

Q: Open circuit characteristic of a d.c. generator gives relation between * V and If E and la V and la…

Q: A long-shunt compound generator delivers a load current of 50 A at 500 V and has armature, series…

A: Given:-IL= 50 AV= 500 VRa=0.05 ΩRs = 0.3 ΩRSh = 250 ΩVD= 1 V

Q: A separately excited dc generator is rated at 172 kW, 430 V, 400 A, and 1800 r/min. Ra = 0.05 N, Rf…

A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Q: A 3-phase, Y connected, round rotor synchronous generator rated at 10KVA, 240V has a Synchronous…

Q: 50 kVA, 500 V, single phase alternator gives 200 V on open circuit at the field current of 15 A.…

Q: A 350 V, 50 Hz, Y-connected, eight poles synchronous generator has the OCC given in tabular form…

Q: THydropower Plant System The following nametag is specification of a generator in a hydropower…

A: We are supposed to be answer of first four subparts of the question as per guildlines.

Q: 2. A short shunt compound generator has an armature, shunt field and series field resistances of…

Q: 5. A three-phase, Y-connected load takes 50 A current at 0.707 lagging power factor at 220 V between…

Q: A shunt generator has an external characteristic whose terminal voltage is given by the equation VT=…

A: Given , external characteristics of generator Vt = 240 -0.5 IL . Given load resistance RL = 12 ohms…

Q: A 3-phase, Y connected, round rotor synchronous generator rated at 10KVA, 220V has a Synchronous…

A: i have explained in detail

Q: A long-shunt compound generator supplies a terminal voltage of 220 V when delivers 110 A. Determine:…

A: In the question, Find the total inducse emf. Total power generator. P= EIa Power P= I2 R…

Q: The rotor winding current for a four-pole synchronous ac generator with a distributed rotor winding…

A: Given data: g=0.6 mmBpeak=1.6 TNr=263

Q: A 25 hp, 460 V, 60 Hz, 4 poles, Y connected three phase induction motor has the following per-phase…

Q: A 480 V, 60 Hz ,Delta Connected, Four Poles Synchronous Generator has A Direct Axis Reactance of 0.1…

Q: A 690 KVA, 4200-V, 60 Hz, 0.9 PF lagging, Delta-connected, 8- pole synchronous generator has an…

A: Synchronous impedance method: This method does not give exact results but it is important because it…

Q: A critical factor in the section of a generation of a generator for a particular application is that…

A: From a customer point of view, the important factors that customer look for while purchasing the…

Q: A long shunt compound generator supplies 22 kW at a terminal voltage of 220V. The resistance of the…

Q: 20MVA, 12.2KV, 0.8 PF lagging Y- connected SG has a negligible armature resistance and syn.…

A: 20 MVA12.2 KV 0.8 lag Y generator Xs=1.1 pu(a) ohmic value Xs=PU Value×base impedance base impedance…

Q: (c) A 2400 V, 1000 KVA, 0.85 power factor (PF) lagging, 50 Hz six-poles, Y-connected synchronous…

A: Given: A 2400 V, 1000 kVA, 0.85 power factor (PF) lagging, 50 Hz six-poles, Y-connected synchronous…

Question

100%

Problem:

A short-shunt compound generator has armature, shunt field and series field resistances of 0.5 Ω, 156 Ω, and 0.465 Ω respectively. If it supplies a load of 9 kW at a terminal voltage of 241 V, calculate the generated emf in volt.

*Four decimal places

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

Induction motors and welding transformers require magnetizing current, which causes a. lagging power factor. b. leading power factor. c. unity power factor. d. zero power factor.
A short shunt compound generator supplies a load of 20 kW at 500 V. The armature, series and shunt field resistance are 0.10 ohm, 0.05 ohm, and 100 ohms respectively. Find the power developed in the armature. Choices: 24600 W 20500 W 22800 W 25400 W
A 30kW series generator has an efficiency of 88% when operating at rated load. If the stray power loss is 15%of the full load losses, calculate the maximum efficiency of the generator. Assume that the stray power loss isconstant and the other losses vary as the square of the load,
A long shunt compound generator has a shunt field with 1200 turns per pole and a series field with 4 turns per pole. If the shunt field and series field ampere-turns are, respectively, 1200 and 196, calculate the power delivered to a load when the terminal voltage is 230 V. P = W
The shaft of a three-phase synchronous generator is rotating at 1500 RPM synchronous speed. This generator is supplying a load of 15.2 KW, 0.8 PF lagging, with an efficiency of 83.5 %. The copper losses are neglected. Calculate the sum PF&w + Pcore + Pstray , and the induced torque by this generator. Select one: O a. PF&w + Pcore + Pstray = 3003.6 W, and Tind = 92.3 N.m. O b. PF&w + Pcore + Pstrav = 3597 W, and tind = 104.9 N.m. O c. PEgw + Pcore + Pstray = 2508 W, and tind = 104.9 N.m. O d. PF&w + Pcore + Pstray = 2508 W, and tind = 92.3 N.m. O e. None
The reactance of a generator is given as 0.1 pu based on the generator of 17 KV, 300 MVA. Determine the pu reactance on a base of 17 KV, 250 MVA. New pu reactance is.......
A 12 V generator has an internal resistance of 0.05 ohm. Two loads are connected in parallel to its terminals, one drawing a 12 A current and the other dissipating energy at the rate of 200 W. What is the terminal voltage of the generator with this load? Ans. 0.82 volts
An ideal dc generator has regulation of 40% 20% O 30% Zero
The shaft of a three-phase synchronous generator is rotating at 1800 RPM synchronous speed. This generator is inducing a torque of 102.4 N.m under a certain load. If the copper losses are neglected, and the sum Pfgw + Pcore + Pstray = 4826 Watt, find the efficiency of the generator under those conditions. Select one: O a. % Efficiency = 80 % O b. % Efficiency = 92 % O c. % Efficiency = 88 % O d. None e. % Efficiency = 82 %
The shaft of a three-phase synchronous generator is rotating at 1800 RPM synchronous speed. This generator is inducing a torque of 102.4 N.m under a certain load. If the copper losses are neglected, and the sum Pf&w + Pcore + Pstray = 4826 Watt, find the efficiency of the generator under those conditions. Select one: O a. % Efficiency = 80 % O b. % Efficiency = 92 % O c. % Efficiency = 88 % O d. None O e. % Efficiency = 82 %
The shaft of a three-phase synchronous generator is rotating at 3000 RPM synchronous speed. This generator is inducing a torque of 100 N.m under a certain load. If the copper losses are neglected, and the sum PF&w + Pcore + Pstray = 7854 Watt, find the efficiency of the generator under those conditions. Select one: O a. % Efficiency = 92 % O b. % Efficiency = 88 % O c. % Efficiency = 80 % O d. None O e. % Efficiency = 82 % Clear my choice
A three-phase, star-connected alternator has 8 number of poles, armature with 160 slots and 2 conductors per slot. The speed of rotation is 1000 rpm. The flux per pole is 0.06 weber. If the winding factor is 0.94 and all the conductors in each phase are in series. Calculate a) Frequency of generation b) Number of turns c) EMF generated (phase voltage) d) EMF generated (Line voltage)