A 50 MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3-phase, steam-turbine generator has a synchronous reactance of 10per-phase, and a negligible armature resistance. The field current is adjusted for 40-KV generator output line voltage at no load.This generator is connected to operate in parallel with a large power system (infinite bus).If the field current is unchanged, determine the absolute maximum output power of this generator.Select one:O a. Pout, max= 221.7 MWO b. NoneO c. Pout may = 384 MwO d. Pout, max = 128 MW

In this question , we will find maximum output power of generator..

50 MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3-phase, steam-turbine generator has a synchronous reactance of 10 er-phase, and a negligible armature resistance. The field current is adjusted for 40-KV generator output line voltage at no load. his generator is connected to operate in parallel with a large power system (infinite bus). f the field current is unchanged, determine the absolute maximum output power of this generator. elect one: J a. Pout, max = 221.7 MW O b. None 2 c. Pout, max = 384 MW O d. Pout, max = 128 MW

50 MVA, 32-KV, 0.85-PF-lagging, 50-Hz, 4-pole, Delta-connected, 3-phase, steam-turbine generator has a synchronous reactance of 10 er-phase, and a negligible armature resistance. The field current is adjusted for 40-KV generator output line voltage at no load. his generator is connected to operate in parallel with a large power system (infinite bus). f the field current is unchanged, determine the absolute maximum output power of this generator. elect one: J a. Pout, max = 221.7 MW O b. None 2 c. Pout, max = 384 MW O d. Pout, max = 128 MW

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Two 30 AC generators are such that one has twice the linear dimensions of the other. The field windings of each are excited to give identical sinusoidal air gap flux density waveform. Both have the same number of stator slots and identical winding patterns. The conductors per slot in big generator in K times that of the smaller one. The value of K to get equal no-load voltage at same frequency is (a)8 (b) 8 1 (d) 7 (c) 4
and t A common base of 100 MVA and 25 KV is selected. What is the current base (Ig) Select one: O a. 4 KA O b. None of these O c. 6.25 kA O d. 2.309 KA A 100-MVA, 60-kV, three-phase synchronous generator has a synchronous reactance of armature resistance. The generator is operating with an excitation per phase E= 47.116 power before losing synchronism (stability limit). and the armature c Thus, the maximum generated power is Pmax =
A short shunt compound generator delivers 150A at a terminal voltage is 230V. The shunt field current is 2.5A. The resistances of the armature, series field and diverter are 0.032-ohm, 0.015 ohm and 0.03 ohm, respectively. Calculate the electrical efficiency of the generator at this load.
Three identical steam-turbine generators G1, G2, and G3 are operating in parallel. Each generator is: 7.2 KV, 20 MVA, 50 Hz, 0.85 PF lagging, 4-poles, Y-connected, with a synchronous reactance of 2 Q and an armature resistance of 0.05 Q. Each of generators G1 and G2 has a characteristic power-frequency slope of 4.7 MW/Hz, while generator G3 has a slope of 5.0 MW/Hz. If all three generators are supplying a total load of 51.2 MW, and the no-load frequency of each generator is set to 52.4 Hz, what will the system frequency be? How much power is supplied by generator G3? Select one: O a. fsys = 48.84 Hz, PG3 = 17.8 MW O b. None O c. fsys = 49.05 Hz, PG3 = 16.75 MW O d. fsys = 48.95 Hz, PG3 = 17.25 MW Clear my choice
Three identical steam-turbine generators G1, G2, and G3 are operating in parallel. Each generator is: 7.2 KV, 25.4 MVA, 60 Hz, 0.77 PF lagging, 4-poles, Y-connected, with synchronous reactance of 2 Q and an armature resistance of 0.05 Q. Each of generators G1 , and G2 has a characteristic power-frequency slope of 5.8 MW/Hz, and no-load frequency of 62.5 Hz. Generator G3 has a characteristic power-frequency slope of 6.0 MW/Hz. Find the no-load frequency of generator G3 for which all generators supply a load of 42.6 MW, at fsys = 60 Hz. Select one: O a. fevs = 62.95 Hz O b. fsys = 62.26 Hz O c. None O d. fsys = 62.5 Hz
Three identical steam-turbine generators G1, G2, and G3 are operating in parallel. Each generator is: 7.2 KV, 20 MVA, 50 Hz, 0.85 PF lagging, 4-poles, Y-connected, with a synchronous reactance of 2 Q and an armature resistance of 0.05 N. Each of generators G1 and G2 has a characteristic power-frequency slope of 4.7 MW/Hz, while generator G3 has a slope of 5.0 MW/Hz. If all three generators are supplying a total load of 51.2 MW, and the no-load frequency of each generator is set to 52.4 Hz, what will the system frequency be? How much power is supplied by generator G3? Select one: O a. fsys = 48.84 Hz, PG3 = 17.8 MW O b. fsys = 49.05 Hz, PG3 = 16.75 MW O c. fsys = 48.95 Hz, PG3 = 17.25 MW O d. None
The type generator field winding is supplied from the external D.C. source. separately excited Compound Shunt Self excited
synchronous generator threewThe phases are rated at 1000 kVA and operate at a voltage of 6.6 kV. The product resistance per phase is 0.38 ohms and the leakage reactance is 0.5 ohms per phase. The generator works to provide full load at a power factor of 0.85 delayed and at normal voltages. Find the value of the no-load voltage.
A long shunt compound generator delivers a current of 10A at 200V and has a series field resistance and shunt field resistance of 1 ohm and 200 ohms respectively. Then line current is a. 2A b. 1A c. 9A d. 10A
A 10-kW, 250-V compound (long-shunt) generator has a no-load voltage of 230 V. The shunt field has 800 turns per pole and the series field 8.5 turns per pole. The shunt- and the series-field resistances are 80 ohms and 0.07 ohm, respectively. In order to make the generator flat-compound, so that it will have a no-load voltage of 230 V and a full-load voltage of 230 V, the series must produce 225 amp-turns. Calculate: (a) the resistance of the diverter to accomplish this change; (b) the total number of ampere-turns produced by each pole at no-load and at full-load.
Three-phase, 400 V (line voltage), 60 Hz, 6-pole, star-connected synchronous generator has a synchronous reactance of 1.2 ohms per phase. The armature current of the generator at full load is 64 A at a back power factor of 0.95. This generator has a rotational loss of 2 kW and a core loss of 1.6 kW at full load. The excitation current is adjusted so that the output voltage is 400V (line voltage) when the generator is running at no load. When the generator is loaded with 0.95 back power factor current at full load A) Find the rotating field speed of the generator? B) Find the mechanical speed of the generator? C) What will be the output voltage? D) Find the yield? E) Calculate the voltage regulation?
A 1MVA, 11 KV, three phase wye-connected synchronous generator has a synchronous reactance of 5 ohms and a negligible reactance per phase. At a certain field current the generator delivers rated load at 0.9 lagging power factor at 11 KV. For the same excitation, what is the terminal voltage at 0.9 leading power factor full-load?