Q3: The turning moment diagram for a multicylinder engine has been drawn to a scale of 1 mm= 4500 N-m vertically and 1 mm 2.4° horizontally. The intercepted areas between output torque curve and mean resistance line taken in order from one end are +342, -230, +245, -303, +115, -232, +227, -164 mm², when the engine is running at 150 r.p.m. If the mass of the flywheel is 1000 kg and the total fluctuation of speed does not exceed 3% of the mean speed, find the minimum

Q3: The turning moment diagram for a multicylinder engine has been drawn to a scale of 1 mm= 4500 N-m vertically and 1 mm 2.4° horizontally. The intercepted areas between output torque curve and mean resistance line taken in order from one end are +342, -230, +245, -303, +115, -232, +227, -164 mm², when the engine is running at 150 r.p.m. If the mass of the flywheel is 1000 kg and the total fluctuation of speed does not exceed 3% of the mean speed, find the minimum

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q2) A square four cylinder automotive spark-ignition engine is being designed to provide a maximum brake torque of 150 N-m, in the mid-speed range 3000 rev/min, Assume the mean effective pressure is 925 kPa, he maximum mean piston speed is 15 m/s إجابتك * ,i. Estimate the required engine displacement 0.002 m3 0.003 m3 0.02 m3 0.0025 m3 * , Estimate bore 0.076 m 0.086 m 0.08 m 0.068 m * , Estimate stroke 0.086 m 0.076 m 0.068 m 0.08 m * Estimate the maximum brake power the engine will deliver 60 kw 65 kw 70 kw 75 kw O O O O O o o o O O O O O O
Q1: An engine of multi-cylinder is to rotate at a speed of 600 r.p.m. At draw the turning moment diagram to a scale of 1 mm = 250 N-m and 1 mm = 3°, the areas below and above the mean torque line in mm^2 are: + 160,- 172, + 168, 191, + 197, - 162. The speed is to be kept within + 1% of the mean speed of the engine. Determine the necessary moment of inertia of the flywheel. Determine the suitable dimensions of a rectangular flywheel rim if the breadth is twice its thickness. The density of the cast iron is 7250 kg/m3 and its hoop stress is 6 MPa. Assume that the rim contributes 92% of the flywheel effect.
The total friction mean effective pressure of a 4-cylinder Sl engine has a quadratic function with a = 92, b = 2.3 and c = 3.5. Three measurements have been done at three different engine rotational speeds N. The amep is found equal to 12.3, 21.4 and 28.7 kPa and the pmep is found equal to 11.03, 3.225 and 51.83 kPa at Nequal to 1500, 2500 and 5500 rpm respectively. If the mechanical efficiency is equal to 0.84, the indicated mean effective pressure at N = 6600 rpm is equal to (in kPa):
The turning moment diagram for a multicylinder engine has been drawn to a scale Imm = 600 N-m vertically and Imm = 3° horizontally. The intercepted areas between the output torque curve and the mean resistance line, taken in order from one end, are as follows: +52, -124, +92, -140, +85, -72 and +107 mm2, when the engine is running at a speed of 600 r.p.m. If the total fluctuation of speed is not to exceed ±7.5% of the mean, find the necessary mass of the flywheel of radius 0.5 m. Find the mass of the flywheel • Ans.: 183 kg
2- Diesel engine, six cylinders is tested at 4750 rpm, the pressure and temperature of the air entering the engine are 1.2bar, and 25 if the bore of cylinder is 80 mm and stroke 120 mm ,take air fuel ratio is 12:1, the specific fuel consumption is 0.52kg/kWh, and the brake power is equal 94 kW Find the Volumetric efficiency
Q. A single stage impulse rotor has a blade ring diameter of 57.5 cm and rotates at a speed of 10,000 r.p.m. The nozzles are inclined at 20o to the direction of motion of the blades and the velocity of the issuing steam is 1,050 m/sec. Determine the inlet blade angle. Assume a friction coefficient of the blading equal to 0.85 and that the inlet and outlet angles are equal. Find also: (a) the power developed at the blades for a steam supply of 1,350 kg per hour (b) the diagram efficiency, and (c) the loss of kinetic energy due to blade friction
A multi-cylinder engine is to run at a speed of 600 r.p.m. On drawing the crank-effort diagram to scale of 1 cm = 2452.5 N-m and 1 cm = 30°, the areas above and below the mean torque line in sq.cm. are as follows: +1.6, –1.72, +1.68, –1.91, +1.97 and -1.62. The speed is to be kept within ±1% of the mean speed of the engine. Calculate the necessary moment of inertia of the flywheel. Determine the suitable dimensions of a rectangular flywheel rim, if the breadth is twice the thickness. The density of the cost- iron is 725 gm/cm³ and its hoop stress is 588.6 N/cm?. Assume that the rim contributes 92% of the flywheel effect. %3D
(2) a fou-cylinder, 2.4 liter engine operates on a four-stroke cycle at 3200 r.p.m. the compression ratio is 9.4:1, the connecting rod length r = 18 cm, and the bore and stroke are related as S = 1.06 B. calculate :- 3 (a) clearance volume of one cylinder in cm³,L, and in ³. (b) Bore and stroke in cm and in. (c) Average piston speed in m/seca 1 ft/sec
HANDWRITTEN: Cessna 172 Skyhawk has a horizontally opposed engine that operates on a Diesel cycle with a compression ratio of 18:1. Using the air standard assumption, the following parameters are applied: P1 = 115 kPa, k = 1.35, mep = 815 kPa. Compute for the cutoff ratio. Note: Make sure to indicate a CORRECT P-V and T-S diagram. Also, show the complete derivation of the working formula used to solve for the cut-off ratio.
What is the engine speed (in rpm) required for good volumetric efficiency for a square engine with one inlet and one exhaust valve, bore of 0.086 m, inlet air temperature of 327 K, exhaust temperature of 875 K and exhaust valve diameter 31.9 mm. Assume specific heat ratio =1.32, R = 287 J/kg.K, an average inlet flow coefficient 0.37 and an average exhaust flow coefficient 0.47. Select one: a. 7150 b. 7800 c. 5620 d. 8640 e. 9200
A full load test on a two-stroke engine yielded the following results: speed 440 rpm; brake load 50 kg; imep 3 bar; fuel consumpt ion 5.4 kg /h; rise in jacket water temperat ure 36 °C; jacket water flow 440 kg /h; air-fuel ratio by mass 30; temper ature of exhaust gaa 350 °C; temperature of the test room 17 °C; baromet ric pressure 76 cm of Hg cylinder diameter 22 cm; stroke 25 cm; brake diameter 1.2 m; calorific value of fuel is 43 M.J /kg; propor tion of hydrogen by maas in the fuel 15%; R 1 kJ /kg K; specific heat of dry steam 2 k.J/kg K. Assume enthalpy of super heated steam to be 3180 kl/kg. Determine, 0.287 k.J/kg of mean specific heat of dry exhaust gases = %3D (i) the indicated ther mal efficiency (ii) the specific fuel consumption in g/kW h (iii) volumetric efficiency based on atmoepher ic condit ions Draw up a heat balance for the test on the percentage basis indicat ing the content of each item in the balance.
A 1500cm³, four-stroke, four cylinder CI engine operating at 3000rpm produces 48kW of brake power. Volumetric efficiency is 0.92 and air-fuel ratio AF=21:1 Calculate: (Show your solution) a. Rate of air flow into the engine (kg/sec) b. Break specific fuel consumption (gm/kW-hr) c. Break output per displacement (kW/I)