QUESTION 1An Automotive Engineering company has à task to setup a diesel engine for a new vehiclemodel. The engine has four-cylinder, four-stroke and 3 liters of displacement volume thatoperates on the ideal diesel cycle with a compression ratio of 17 as shown in Figure 1. Theengine uses light diesel fuel with a heating value of 42,500 kJ/kg and an air-fuel ratio of 24.You are the engineer in the company is given the following task to analyze the enginecharacteristics based on constant specific heats at 500 K,a) Evaluate all the working temperatures and pressures al all points on P – V diagram.b) Evaluate the thermal efficiency of the cycle.c) If the engine is plan to operate at 3000 rpm, evaluate the power rating produce by theengine.TDCBDCDisplacementClearancevolumevolumeFigure 1

Four-cylinder, Four-stroke Displacement Volume, Vs = 3 Litres =3 × 10-3 m3 Compression Ratio, r = 17…

Answered: n Automotive Engineering company has a…

n Automotive Engineering company has a task to setup a odel. The engine has four-cylinder, four-stroke and 3 liter Derates on the ideal diesel cycle with a compression ratio o

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Can you please help me with ONLY the C,D, and E parts of this question? I would appreciate any insight or explanation on the final 3 parts only. I asked this question already but I got an explanation of the first 3 instead of the final. lol. Thank you! For C, I understand that Th>Ti>Tc, does this mean that since the ec=1-Tc/Th that the efficiency won't change with having two engines because we are using the same temps?
Below figure shows Ts diagram of an aircraft engine. Draw the engine diagram only. Answer the following: a) What is TIT and max temperature magnitudein this engine? b) What is the fuel to air ratio in main CC and AB. c) Guess the approximate pressure ratio of the compressor making suitable assumption/data. 06 2000 K 1200 K 03 ATO (combustion) 02 01 565 K Pa 04 5 959 K ATO (afterburning)
Compute the engine cap of fuel engine power plant with 72 82% gen efficiency and supercharge engine capacity of 227 KW 178.50 KW 168.50 KW (c) 158.50 KW 148.50 KW
In company that designs road cars and heavy trucks, it important to make the proper selection of the engines. Your part as a system energy engineer is to make a proper selection between an engine operates on Otto cycle/gasoline engine or Diesel cycle/diesel engine. Your head of department asked you to provide a detailed technical report that shows your selection for engine to be used with heavy truck vehicle. This is best achieved by performing the following tasks: Section.1: 1. Which engine does operate at lower rpm and has higher air-fuel mass ratio? 2. Which engine does burn fuel more completely? 3. Which engine has lower fuel cost? 4. Explain what compression ratio for Otto and Diesel cycles means 5. Explain what cut-off ratio for Diesel cycles means 1:06 pm 6. Explain the limitations of SI engines in terms of their ability to operate at much higher compression ratios. What is this limitation called? 7. Provide general plot(s) for thermal efficiency, 7 vs compression ratio, r for…
1c. State two industrial applications of the diesel engine.
B) Why A two stroke cycle engine gives double the number of power strokes as compared to the four stroke cycle engine, at the same engine speed.
3.1 A 3 liters S.I. V6 engine that operates on a four-stroke of 3000 revolution per minute, the compression ratio is 10, the lengths of the connecting rod and the crank offset are 15 cm and 4 cm respectively, the combustion is completed at 35° of the crankshaft rotation after I need an answer as soon as possible, and I hope it will be clear. Greetings, my bro. TDC, the engine is running with the stoichiometric air-fuel ratio, mechanical efficiency 90%. If the engine is connected to a dynamometer which its reading of 100 kW. Calculate: 1-piston speed at end of the combustion, 2-volume of the combustion chamber at end of the combustion, 3-engine torque, 4- indicated mean effective pressure and 5-break specific fuel consumption.
Answer this ASAP thx A Diesel cycle has a maximum temperature of 1700 K. The diesel engine takes outside air as the working fluid with a pressure data of 100 kPa and a temperature of 300 K. The mass of air that enters the system (cycle) is 12 kg. The compression ratio of the engine is 15. Calculate A) the net work produced, B) the thermal efficiency, C) the mean effective pressure (MEP).
A diesel engine in a power plant has an output of 2000 KW at 1000 rpm. It uses fuel oil having a heating value of 42,000 KJ/kg. If the efficiency of the engine is 39.61%. Calculate the sp. gr. of the fuel used and the fuel consumption in barrels per month.
(1): We can classify IC engine into two categories on the basis of number of stroke for each cycle. Two stroke engine: In two stroke engine suction and compression takes place in 180 degree rotation of the crank which is counted as one single stroke and power and exhaust stroke takes place during the second stroke of the engine. Four stroke engine: In four stroke engine all the four processes takes place with different different strokes so total angle of rotation of the cranks will be 720 degree which consists of two full rotation of the crank.
Mechanical Engineering 3. A 50 Horsepower Diesel Engine with a brake thermal efficiency of 30% uses fuel oil with HV=18500 BTU/lb.Find the fuel needed for one year operation working 24 hours daily.
Project 2 A gas turbine cycle is preferred over steam power plant in power station that is used to generate electricity. Your manger asked you to investigate and study the possibility of upgrading the power plant discussed in Project-1 to a gas turbine cycle or a combination of both cycles (Combined cycle). The head of the department asked you to deliver a report showing a professional evaluation and assessment for gas turbine cycle efficiency given the following information. First you selected a gas-turbine power plant operating on an ideal Brayton cycle and according to the manufacturing datasheets it has the following specifications: • A pressure ratio of 10. • Heat is added to the cycle at a rate of 500 kW Air passes through the engine at a rate of 1 kg/s The air at the beginning of the compression is at 70 kPa and 0 C. Task 2 Under the assumption of standard air, determine the following: 1. The net power produced in the cycle 2. Back-work ratio 3. Thermal efficiency using the…