LA diesel engine has a bore of D=110 mm and the stroke S= 130 mm (3 a clearance volume of 110 cm³, the length of the connecting rod is L=235 mm and its center of gravity is at 185 mm from the axis of the small end. The mass of the piston assembly is Mpa ,=4.45 kg and the mass of the connecting rod is m=3.71 kg. knowing that at e = 380° and at engine speed of 2800 rpm the cylinder pressure is 5.9 MPa and the crankcase pressure is 0.1 MPa. Calculate: 1. The angular velocity of the crank. IS10 omil a a. 230.36 rad/s b. 209.44 rad/s e. 240.85 rad/s sonlq c. 159.12 rad/s d. 293.2 rad/s 2. The piston distance measured from TDC. a. 125.03 mm b. 65.67 mm c. 4.97 mm d. 68.51 mm e. 12.28 mm 3. The acceleration of the piston at TDC a. 0.0 m/s? b. 7135.63 m/s² c. 4653.6 m/s? d. -2523.94 m/s? e. -2547.78 m/s?

LA diesel engine has a bore of D=110 mm and the stroke S= 130 mm (3 a clearance volume of 110 cm³, the length of the connecting rod is L=235 mm and its center of gravity is at 185 mm from the axis of the small end. The mass of the piston assembly is Mpa ,=4.45 kg and the mass of the connecting rod is m=3.71 kg. knowing that at e = 380° and at engine speed of 2800 rpm the cylinder pressure is 5.9 MPa and the crankcase pressure is 0.1 MPa. Calculate: 1. The angular velocity of the crank. IS10 omil a a. 230.36 rad/s b. 209.44 rad/s e. 240.85 rad/s sonlq c. 159.12 rad/s d. 293.2 rad/s 2. The piston distance measured from TDC. a. 125.03 mm b. 65.67 mm c. 4.97 mm d. 68.51 mm e. 12.28 mm 3. The acceleration of the piston at TDC a. 0.0 m/s? b. 7135.63 m/s² c. 4653.6 m/s? d. -2523.94 m/s? e. -2547.78 m/s?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A four-cylinder, 2.4-liter engine operates on a four-stroke cycle at 3200 rpm. The compression ratio is 9.4:1, the connecting rod r = 18cm, and the bore and stroke are related as S = 1.06B Calculate: (1) Clearance volume of one cylinder in cm³, L, and in3 (2) Bore and stroke in cm and in (3) Average piston speed in m/sec and ft/sec (4) Volume in the combustion chamber when crank angle at 90 degrees
Calculate the displacement, the real power and the real torque of an hydraulic power engine with a theoretical power of 1.5 kW. The rotation speed is 1000 rpm and the pressure is 12 Mpa. Volumetric efficiency is 95% and mechanical efficiency is 93%. Answer :Real power = 1.33kWActual torque = 12.7 N-mDisplacement = 7.12 cm3/rev
A single cylinder vertical engine has a bore of 30 cm, a stroke 36 cm and a connecting rod of length 72 cm. The weight of the reciprocating part is 130 kg. When the piston is at quarter stroke from TDC and is moving downwards, the net pressure on it is 0.6 MPa. If the speed of the engine is 250 r.p.m., calculate the turning moment on the crankshaft at the instant corresponding to the position stated above.
The wind turbine gives the following data: Blade length, l = 49 m, Wind speed, V= 32 Km/Hr, Air density, ρ = 1.23 kg/m3 , Power Coefficient, Cp = 0.4, Calculate the power available in the rotor in Watts. A- 151931161.80 W B- 394985.47 W C- 60772464.72 W D- 1302564.83 W
There are two double-acting pneumatic actuators, the extension of each one is executed in 5 seconds at 80 psi and recoil in 4 seconds at 30 psi, the travel of both is 12 inches, the diameter of the piston is dp = 4 "and of the rod dv = 1"a) Determine the compression ratios. The local atmospheric pressure is 79kpa = (11.5 psi)b) Determine the air consumption in cubic feet per minute of free air PCMc) Determine the average air consumption for each.d) Propose the regulation values of the pressure switch, system pressure and safety valve
(2) a fou-cylinder, 2.4 liter engine operates on a four-stroke cycle at 3200 r.p.m. the compression ratio is 9.4:1, the connecting rod length r = 18 cm, and the bore and stroke are related as S = 1.06 B. calculate :- 3 (a) clearance volume of one cylinder in cm³,L, and in ³. (b) Bore and stroke in cm and in. (c) Average piston speed in m/seca 1 ft/sec
A Pelton wheel operates with an effective head of 310 m producing 15 MW of power. The overall efficiency of the turbine is n = 0.84, the velocity coefficient of the nozzle is CN = 0.98, and the velocity coefficient of the rotor is c, = 0.85. The angle of the relative velocity leaving the rotor is B3 = -73°. The wheel rotates at 500 rpm, and the ratio of the blade speed to nozzle velocity is 0.46. (a) Give a recommended number of jets to which the supply flow should be split and the number of blades on the wheel. (b) Find the mechanical and volumetric efficiencies given the value of Ku = 0.05. (c) Find also the optimum speed ratio.
A 6 kilowatt pump discharges 10 kilogram per second when the pump impeller diameter is 45 centimetre .what characteristics of pump will be provided when increasing the impeller diameter to 47 centimetre. 8 kilowatt discharge 5 kilogram per second 8.5 kilowatt discharge 15 kilogram per second No one of these 5 kilowatt discharge 10 kilogram per second
The characteristics of a centrifugal pump operating at 1000 rpm is given by H=41-2000². The system characteristics may be represented by H= 24 +3200². The units for volume flow rate Q and head H are m³/s and m, respectively. When two pumps operating at 1000 rpm and connected in parallel are used, with the system characteristics remaining unchanged, the operating volume flow rate through the system is m³/s.
A centrifugal pump rotates at n. = 750 rpm. Water enters the impeller normal to the blades (?1 = 0°) and exits at an angle of 35° from radial (?2 = 35°). The inlet radius is r1 = 12.0 cm, at which the blade width b1 = 18.0 cm. The outlet radius is r2 = 24.0 cm, at which the blade width b2 = 16.2 cm. The volume flow rate is 0.573 m3 /s. Assuming 100 percent efficiency, calculate the net head produced by this pump in cm of water column height. Also calculate the required brake horsepower in W
The characteristics of a centrifugal pump operating at 1000 rpm is given by H=41-20002. The system characteristics may be represented by H = 24+3200². The units for volume flow rate Q and head H are m³/s and m, respectively. When two pumps operating at 1000 rpm and connected in parallel are used, with the system characteristics remaining unchanged, the operating volume flow m³/s. rate through the system is X 0.362 Correct Answer: 0.2144
Q4. The following observations refer to trail on a four-stroke diesel engine: IMEP=3 bar, rate of fuel= 8 kg/h, fuel calorific value= 44 MJ/kg, stroke= 50 cm, bore= 20 cm, speed3 300 rpm, brake load%3D1500 N and radius of brake drum= 0.8 m. Determine the following,Indicated power brake power, mechanical efficiency and overall efficiency