FigurexADM₁M₂wwwwMBсP1 of 1Part BFor the same mechanism, find expressions for dyB and dyc, the virtual displacements of joints B and C,respectively, in terms of the angle, 0; the virtual rotation, 60; and the length, L. Neglect the weight of the links.Express your answers in terms of 0, 80, and L separated by a comma.► View Available Hint(s)ΓΨΠ ΑΣΦ |vec?був, бус = -As shown, the pin-connected mechanism has an applied force with magnitude P = 10.4 lb and applied couplemoments M₁ = 12.6 lb ft and M₂ = 16.5 lb ft. (Figure 1) Each link's dimension is L = 1.00 ft and the spring'sstiffness is k = 50.0 lb/ft. The spring is unstretched when 0.000° and maintains a vertical position due to theroller. Identify all the forces and couple moments that do work on the system. Neglect the weight of the links. Axand Ay are the reaction forces at A in the x and y directions, respectively; D and Dy are the reaction forces at Din the x and y directions, respectively; and F, is the spring force.XCheck all that apply.► View Available Hint(s)AyDEM₂M₁AxDyFP>S

Answered: Image /qna-images/answer/5aac4031-506b-423c-ac64-6e0b554b3f71.jpg

For the same mechanism, find expressions for dy and dyc, the virtual displacements of joints B and C, respectively, in terms of the angle, 8; the virtual rotation, 50; and the length, L. Neglect the weight of the links.

For the same mechanism, find expressions for dy and dyc, the virtual displacements of joints B and C, respectively, in terms of the angle, 8; the virtual rotation, 50; and the length, L. Neglect the weight of the links.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In the below structure what is the number of redundancy? If the structure is unstable key in -100. Please note: You need to inter an integer number only. The asked value is Blank 1 kN
Can you please answer quickly What is the purpose of the problem called kinematic problem in robotics? Finding the position of the robot's joint variables when the robot's end function is posedFinding the position of the robot end function when the joint values of the robot are givenFinding the rate of change of the robot end functionalist's pose given the speed of the robot's joint variablesFinding the speed of the robot's joint variables when the speed of change of the robot's end function's pose is given
Spatial Linkages: Determine the number of links, number of constraints and/or number of degrees of freedom of individual joints. The links should be properly numbered. Find mobility of the system. R R R R R
Q2: Choose the correct answer for each of the following: 1. Find the number of degrees of freedom for Mechanism with higher pair (h±0) in(l=6; j=8): (n=-2; n=-1;n=1;n=2) 2. What's called is a joint of two links that permit relative motion. ( Kinematic pair; Structure; Kinematic chine) 3. Find the number of degrees of freedom for Mechanism with higher pair (h=1) in(l=6; j=8): (n=-2; n=-1;n=1;n=0)
Q: Figure 2 shows a typical mast from a modern racing yacht. It is built in the form of a thin-walled tube (hallow cylinder). To win long-haul ocean races, these yachts need to have every advantage that high-performance materials can give, in terms of maximum stiffness (must not easily deflect), plus minimum weight as possible. The following are the equations to use: 1(F13 8 == 8 EI and I = ar³t, A = 2art assume l and cross section are fixed but thickness t is free to change. • Drive the performance index for this problem • Use table 1 to select top three materials with the best performance index. Figure 2 Table. 1 Data for Tube of Given Stiffness p (Mg.m 3) 2.0 Material E (GPa) GFRP 12 Steel 7.8 200 Wood 0.6 12 Aluminum alloy Titanium alloy 2.7 69 4.5 120
1. Find a combination of link lengths where motion of a point on output link is one quarter of a circle. 2. Find the value of all 0, 0, 0, and y in open and close configuration Read the value of link lengths and the input angle 8., then use the formulae given below to calculate the value of unknowns 03, 0, and y K₁ = = K₂= d K2 K3 = a²-b²+c²+d² 2ac A = cos 0₂ - K₁ - K₂ cos 0₂ + K3 B = -2 sin 0₂ C = K₁ (K₂ + 1) cos 02 + K3 -B± √B²-4AC 2A 0412 = 2tan-1 d K₁ = — K5 = c²d²a²-6² 2ab D = cos 0₂ - K₁ - K4 cos 0₂ + K5 E = -2 sin 0₂ FK₁+ (K₁ - 1) cos 02 +K5 0312 2 tan-1 (-E± -E± √E²4DF 2D Y = 04-03
The following shows the top view of the partially open doors on one side of an entertainment center cabinet. The wooden doors are hinged to each other and one door is hinged to the cabinet. There is also a ternary, metal link attached to the cabinet and door through pin joints. As spring- loaded piston-in-cylinder device attaches to the ternary link and the cabinet through pin joints. Draw a kinematic diagram of the door system and find the mobility of this mechanism. cylinder piston O cabinet link hinge door door hinge
ME124P Practice Exercise 2 Planar Linkages: Determine the number of links, the number of 1 degree and/or 2 degree joints. The links should be properly numbered. Find mobility of the system. TOD
Solve and Draw the following. [Tech pen (0.2 light, 0.4 medium, 0.6 above heavy)] Consider a four bar linkage with the following links: L0 = 180mm, L1 = 40mm, L2 = 170 mm. Using grashof criterion, determine the ranges of values for L3 if the linkage is: a) crank-rocker mechanism b)drag link mechanism c) double rocker.
ME124P Practice Exercise 2 Planar Linkages: Determine the number of links, the number of 1 degree and/or 2 degree joints. The links should be properly numbered. Find mobility of the system.
2) Block 4 slides in a slot in the fixed piece 1. Axis Q₂ of crank 2 is fixed on 1. Q₂₂A = 1 1/2 in., and AB = 4/1/2 Draw the mechanism, assuming limen- sions for 1, if desired, or use center lines only. Draw the four-bar linkage for this mechanism, properly rotate the linkage Q₂ ABQ400; Name each link, and show the finite and infinite cranks. Frind graphically the two extreme positions of 13, The axis of the pin by which link 3 is attached to the block 4.. Dimension the length of the stroke of B. Ans. 3& in. for scale 1:1
Define the equations necessary to find the behavior of the mechanism (reduced to their maximum expression). All the lengths of the links are known, as well as the distances between supports. Consider that points B,C and E form an equilateral triangle. The angle of entry (@g) is specified below. P -> OB 3 2 4 5. エ