nonoose the correct answer for eac1. A gage attached to a pressurized nitrogen tank reads a gage pressure of 70.5 cm ofmercury. If atmospheric pressure is 100 kPa, what is the absolute pressure in the tank?a) 95 kPa b) 99 kPae) 203 kPac) 101 kPa d) 194 kPa2. On a sea-level standard day, a pressure gage, moored below the surface of the ocean (SG= 1.025) reads an absolute pressure of 1.4 MPa. How deep is the instrument?a) 4 mc) 133 md) 140 mb) 129 me) 2080 m3. Consider a soap bubble of diameter 3 mm. If the surface tension coefficient is 0.072 N/mand external pressure is 0 Pa gage, what is the bubble's internal gage pressure?a) 24 Pab) 48 Pac) 96 Pad) 192 Pa4. A 1.2 m long, 2.54 cm-diameter shaft rotates inside an equally long cylinder that is 2.6cm in diameter. The torque required to rotate the inner shaft at 2000 rpm if the gap filledwith oil (μ-0.2884 Pa.s) is...a) 244 N.mb) 3.1 N.mc) 8.2 N.me) none of previous

Name: nonoose the correct answer for eac1. A gage attached to a pressurized
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: nonoose the correct answer for eac1. A gage attached to a pressurized nitrogen tank reads a gage pressure of 70.5 cm ofmercury. If atmospheric pressure is 100 kPa, what is the absolute pressure in the tank?a) 95 kPa b) 99 kPae) 203 kPac) 101 kPa d)

Note: As per the policy, we can solve the first three parts. Please resubmit the remaining part…

Engineering

Mechanical Engineering

CAMERO 1. A gage attached to a pressurized nitrogen tank reads a gage pressure of 70.5 cm of mercury. If atmospheric pressure is 100 kPa, what is the absolute pressure in the tank? a) 95 kPa b) 99 kPa c) 101 kPa d) 194 kPa e) 203 kPa 2. On a sea-level standard day, a pressure gage, moored below the surface of the ocean (SG 1.025) reads an absolute pressure of 1.4 MPa. How deep is the instrument? b) 129 m c) 133 m d) 140 m e) 2080 m a) 4 m 3. Consider a soap bubble of diameter 3 mm. If the surface tension coefficient is 0.072 N/m and external pressure is 0 Pa gage, what is the bubble's internal gage pressure? a) 24 Pa b) 48 Pa c) 96 Pa d) 192 Pa 4. A 1.2 m long, 2.54 cm-diameter shaft rotates inside an equally long cylinder that is 2.6 cm in diameter. The torque required to rotate the inner shaft at 2000 rpm if the gap filled with oil (µ-0.2884 Pa.s) is... a) 244 N.m b) 3.1 N.m e) none of previous **** c) 8.2 N.m

CAMERO 1. A gage attached to a pressurized nitrogen tank reads a gage pressure of 70.5 cm of mercury. If atmospheric pressure is 100 kPa, what is the absolute pressure in the tank? a) 95 kPa b) 99 kPa c) 101 kPa d) 194 kPa e) 203 kPa 2. On a sea-level standard day, a pressure gage, moored below the surface of the ocean (SG 1.025) reads an absolute pressure of 1.4 MPa. How deep is the instrument? b) 129 m c) 133 m d) 140 m e) 2080 m a) 4 m 3. Consider a soap bubble of diameter 3 mm. If the surface tension coefficient is 0.072 N/m and external pressure is 0 Pa gage, what is the bubble's internal gage pressure? a) 24 Pa b) 48 Pa c) 96 Pa d) 192 Pa 4. A 1.2 m long, 2.54 cm-diameter shaft rotates inside an equally long cylinder that is 2.6 cm in diameter. The torque required to rotate the inner shaft at 2000 rpm if the gap filled with oil (µ-0.2884 Pa.s) is... a) 244 N.m b) 3.1 N.m e) none of previous **** c) 8.2 N.m

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

1.4 The absolute viscosity of a fluid at atmospheric conditions is 8 x 10-3 kgf-s/m2. Find this viscosity in: a) Reyn b) Poise c) lbf-s/ft2 d) Pa-s.
2. Both a gage and manometer are connected to a gas tank to measure its pressure. If the reading on the pressure gage is 80 kPa. The distance between the two fluid levels of the manometer h is if the gage fluid in the manometer is a mercury (s =13.6) ; and h is if the gage fluid in the manometer is water. a) 0.4 m; 9m b) 0.9m; 4.3 m c) 6.213m; 0.7626 m. d) 4.91m; 0.668m
2. Both a gage and manometer are connected to a gas tank to measure its pressure. If the reading on the pressure gage is 80 kPa. The distance between the two fluid levels of the manometer h is if the gage fluid in the manometer is a mercury (s =13.6); and h is if the gage fluid in the manometer is water. a) 0.4 m ; 9m b) 0.9m; 4.3 m c) 6.213m; 0.7626 m d) 4.91m; 0.668m P- 80 kPa A=?
A beaker is filled with a liquid up to a height h. If A and B are two points, one on the free kurface and one at the base as shown, such that the minimum distance between the two is I, what will be the pressure at point B? h B a) pgl b) pgh c) pg/P+ h? d) pg/T² – h² Select one: O A What is the pressure in Pascals at a depth of 1m below the water surface? Select one: O 98100 Pa O 980 Pa O 8 Pa O 1 Pa B.
A beaker of height h is filled with a liquid of density p up to a certain limit. The beaker is rotated by an angle 0 such that further increase in the angle will result in over flow of the liquid. If the liquid surface is exposed to the atmosphere, what will be the gauge pressure at point B? a) pgh b) pgh sin e c) pgh cos 0 d) pgh=2 Select one: O A O B Determine the location of the hydrostatic force acting on the submerged rectangular plate P.Pa. Plate has a width of 1.5m. Density of water 1000 kg/m'. PA 3m. PB 1.5m А. 1.29 m В. 0.29 m C. 0.9 m D. 1.9 m Select one: O A ов O O
Q1: Fundamentals Problem: a) A Deep-sea diver reached 5 m below the free surface of a river. Calculate the change in pressure applied on him when he reached 45 m below the river's surface. b) A cooling machine releases 450 J/°C. How much it looses in kJ per °F c) What is the height of a bird above the earth if the barometer reading was 96.0 on the earth and 98.0 kPa where the bird is. Assume pair=1.0 g/L
Unc uisC arge, and C) the power available at the specified point in watts. 2. The absolute viscosity of the liquid is 1.18 x 10-3 Pa.s and its specific gravity is 0.90. a) Compute the equivalent kinematic viscosity in m2 /s. b) Compute the equivalent value in stokes. c) If the viscosity is 0.0126 stokes, what is the equivalent kinematic viscosity in m2/s? 3. If the velocity of water is 8 m/s and the pressure is 140 kPa on the discharge side of a pump, a) what will be the head of the pump if the velocity is 4 m/s and the pressure is 90 kPa on the suction side of the pump? b) how much power is required to drive it if the diameter of the suction side is 600mm? c) If the pump is rated at 120 hp, what is the efficiency of the pump neglecting energy losses in the system?
18 A cylindrical tank contains water pressurized with a gas. Measured as l1 = 60 cm, L2 = 40 cm and L3 = 30 cm. Atmospheric pressure: Patm = 100 kPa ; Relative densities are: psu = 1, Poil = 0.85 and Dewa = 13.6. What is the pressure at point G? a) 100.67 kPa B) 180.64 kPa NS) 153.96 kPa D) 54.06 kPa TO) 80.64 kPa
9- Water pressurized with a gas in a cylindrical tankare available. Measured as li = 60 cm, b = 40 cm and 13 = 30 cm. Atmospheric pressure: Patm = 100 kPa ; Relative densities are: psu = 1, Poil=0.85 and pona=13.6. What is the pressure at point D? a) 150.0 kPa B) 176.7 kPa NS) 50.1 kPa D) 76.7 kPa TO) 96.8kPa
2. A tank filled with kerosene is buried 4 feet underground. The density of kerosene is 51.2 lbs/ft³. a) If the tank is upright as shown below, how much work is needed to pump all of the kerosene out of the tank to a point 3 feet above the tank? 6 ft 12 ft b) What if the tank is only half full. How much work is needed to pump the kerosene out of the tank to a point 3 feet above the tank?
Question 2: a gas has a specific constant pressure of 109 °F and 0.28 Btu/lbm-°F.Regardless of the pressure, C increases by 0.0005 Btu for each degree increase in temperature. One pound of gasassuming it isa) if the temperature increases by 200 °F, calculate the enthalpy change.b) if it is as low as 0.08 Btu / °F, calculate the APV in BTU / Ibm.c) find the work that needs to be given and the work that needs to be done to ensure the same enthalpy change,
Fluid flows through the venture tube shown below. Pressure at section 2 is equal to 100 kPa. If pressure at point 1 is 200 kPa, determine the manometer reading h? Density of fluid and mercury are 800 kg/m^3 and 13500 kg/m^3, respectively. a)80.29 cm b)1.861 m c)1.2 m d)75.53 cm e)25.49 cm