A four-stage single-acting air compressor running in an atmospheric at 87 kPa and 15°C has a F.A.D of 2.83 m³/min. The section pressure and temperature are 80 kPa and 32 °C respectively, the delivery pressure is to be 7 MPa. The temperature at the start of compression in each stage is 32 °C, take n=1.3 for all stages. With reference to formula file the applicable formual number to find the mass flow rate and power input is and , respectively. The mass flow rate to 3 decimal places in kg/min and power input in kW to 1 decimal place are: tivolu

A four-stage single-acting air compressor running in an atmospheric at 87 kPa and 15°C has a F.A.D of 2.83 m³/min. The section pressure and temperature are 80 kPa and 32 °C respectively, the delivery pressure is to be 7 MPa. The temperature at the start of compression in each stage is 32 °C, take n=1.3 for all stages. With reference to formula file the applicable formual number to find the mass flow rate and power input is and , respectively. The mass flow rate to 3 decimal places in kg/min and power input in kW to 1 decimal place are: tivolu

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

QUESTION 25 A four-stage single-acting air compressor running in an atmospheric at 87 kPa and 15°C has a F.A.D of 2.83 m3/min. The section pressure and temperature are 80 kPa and 32 °C respectively, the delivery pressure is to be 7 MPa. The temperature at the start of compression in each stage is 32 °C, take n=1.3 for all stages. With reference to formula file the applicable formual nuber to find the intermedia pressure ratios is
QUESTION 26 A four-stage single-acting air compressor running in an atmospheric at 87 kPa and 15°C has a F.A.D of 2.83 m³/min. The section pressure and temperature are 80 kPa and 32 °C respectively, the delivery pressure is to be 7 MPa. The temperature at the start of compression in each stage is 32 °C, take n=1.3 for all stages. With reference to formula file the applicable formual nuber to find the intermedia pressure is The intermidiate pressure ratio is (to 3 decimal places), The intermidiate pressure at first, second and third stage in kPa to 1 decimal place are: and respectively. No need to add units
Read the question carefully before answering. Box or indicate your final ansurers when solving and draw your diagrams cleanly. Complete solution please. Use 2 decimal places when solving and for final answers. Draw the PV and TS diagram with proper label of points when required. 5. A centrifugal compressor has a single stage and 4 stage model with suction conditions of 100 kPa and 25c. The air must be discharged at 300 kPa. Find the compressor work and heat rejected for each model if the compression is isentropic, and the intercooler pressures.
2. An air compressor is to compress 510m²/hr from 100kpa to 10bar, for an ideal compression with n=1.3, what will be the percent saving in power due to two staging?
Question 4 A single acting two stage reciprocating compressor takes in air at a rate of 0.2 m3/s at a pressure of 0.1 MPa @ 16˚C. The air is compressed to 0.7 MPa while running at 600 rpm. Compression is ideal and the process follows pV1.25 = C. Perfect intercooling takes place and neglecting clearance. What is the Intermediate pressure (IP) in kPa .............., the volume of the Low-Pressure cylinder in m3................... , the volume of the High-Pressure cylinder in m3.................. and the Total Cycle Power (TCP) in kW .....................
Pls. Answer thank you! An auditorium is designed to seat 4500 people. The ventilation rate is 1.62×107 ft³/hr of outside air. The outside temperature is 0°F dry bulb, and outside pressure is 14.6 psia. Air leaves the auditotium at 70°F dry bulb. There is no recirculation. The furnace has a capacity of 1,250,000 Btu/hr. The temperature at which the air should enter the auditorium is most nearly?
Q.1. A refrigeration process with interstage cooling uses refrigerant HFC-134a, and the outlet of the condenser is to be saturated liquid at 40°C. Refer to the following figure for stream numbers in your solution. The pressure of the flash chamber and the intermediate pressure between compressors is to be 290 kPa. The evaporator is to operate at -20°C and the outlet is to be saturated vapor. The flowrate of stream 1 is 23 kg/h. The flash chamber may be considered adiabatic. The compressors may be considered to be 80% efficient. a) What is the power input required to the first compressor? b) What are the flowrates of streams 6 and 7? What is the enthalpy of stream 4? Hot Side 6 5 Condenser 2nd Stage Compressor Throttle Valve 7 Flash Chamber Vapor Phase Only 1st Stage Compressor 8 Throttle Valve Evaporator 1 2 Cold Side
1. define the cutfof ratio and the compression ratio 2. air is compressed at a constant temperature find the word done on the fluid under the: - initial pressure 200 kpa - final pressure 1500 kpa - compression temperarture 600 k
Q3: A distillation column is separating acetone(more volatile component) from ethanol. As pictured, there are two feeds with flow rates F₁=100 mol/hr and F₂-200 mol/hr. Feed 1 has z₁-0.7 and is saturated liquid. Feed 2 has z2 0.4 and is a superheated vapor (q=-0.1) where approximately 1 mol of liquid will vaporize on feed stage for each 10 mol of feed. We desired xd-0.95 and xw-0.05. How many stages are needed to achieve this separation? Ln/Vn=0.64.
HVAC UPVOTE WILL BE GIVEN. PLEASE WRITE THE COMPLETE SOLUTIONS. please anwer all the subquestions. thank you. 3. Air at 22°C db & SATURATED Solve for the following: a. RH b. DPT c. V d. h e. RH
The compression ratio of an Otto cycle is 8, at the beginning of the zanthropic compression process, the pressure of the air is 100 kPa, the temperature is 27 "C, the volume is 550 cm. At the end of the lzantropic expansion process, the temperature of the air is 700 K. Using the specific temperature values at room temperature (according to the cold air standard assumptions) Find the gravity of the air.
a reciprocating compressor handles 1001 cfm