A factory manufactures chairs and tables, each requiring the use of three operations: Cutting, Assembly, and Finishing. The first operation can be used at most 40 hours; the second at most 42 hours; and the third at most 25 hours. A chair requires 1 hour of cutting, 2 hours of assembly, and 1 hour of finishing; a table needs 2 hours of cutting, 1 hour of assembly, and 1 hour of finishing. If the profit is $20 per unit for a chair and $30 for a table, how many units of each should be manufactured to maximize revenue?

A factory manufactures chairs and tables, each requiring the use of three operations: Cutting, Assembly, and Finishing. The first operation can be used at most 40 hours; the second at most 42 hours; and the third at most 25 hours. A chair requires 1 hour of cutting, 2 hours of assembly, and 1 hour of finishing; a table needs 2 hours of cutting, 1 hour of assembly, and 1 hour of finishing. If the profit is $20 per unit for a chair and $30 for a table, how many units of each should be manufactured to maximize revenue?

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter12: Queueing Models

Section12.5: Analytic Steady-state Queueing Models

Problem 37P

See similar textbooks

Similar questions

During an eight-hour shift, 750 non-defective parts are desired as a result of a manufacturing operation. The default operation time is 15 minutes. As the operators of machine are inexperienced, the actual time they take to perform the operation is 20 minutes, and, on average, a fifth of the parts that start to be manufactured are lost. Assuming that each one of the machines used in this operation will not be available for one hour in each shift, determine the number of machines needed.
A machine used for cutting materials in a factory has the following outputs per hour at various speeds and required periodic tool regrinding at intervals cited. Speed Hour Output per Tool RegrindingA 200 pieces every 8 hours B 280 pieces every 5 hours A set of tools costs 560 and can be ground twenty times. Each regrinding costs 54.00 and the time needed to regrind and change tools is 1 hour. The machine operator is paid 35.00 per hour including the time the tool is changed. The tool grinder who also sets the tools to the machine is paid 40.00 per hour. The hourly rate chargeable against the machine is 38.00, regardless of machine speed. Which speed is more ecomical? A. Speed B, 0.096/pc B Speed B, 0.087/pc C. Speed A, .054/pc D. Speed A >037/pc
There is an upstream Picking department that feeds two downstream Packing departments: Pack Singles and Pack Multis. Those Packing departments feed to a Shipping department that loads the outgoing trucks. 40% of your Pick volume goes to Pack Singles and has a packing rate of 104 units per labor hour (uph). 60% of the Pick volume goes to Pack Multis and has a pack rate of 215 units per labor hour. Your pickers pick both Single and Multi items throughout the day at an overall average rate of 114 units per labor hour. All units that are packed in both processes go through the Ship process at a rate of 570 units per hour. You have 102 people today for all 4 departments and you absolutely must pack 47,880 units in Pack Multis Items to meet a customer promise metric. How do you allocate labor to balance the flow in your department if you work a 10 hour shift? Do not assume breaks or lunches in your answer. Redirect 1: You now need to process all of the Pack Singles Volume in the first 5…
A Company that makes shopping carts for supermarkets and other stores recently purchased some new equipment that reduces the labor content of the jobs needed to produce the shopping carts. Prior to buying the new equipment, the company used 4 workers, who produced an average of 87 carts per hour. Workers receive $13 per hour, and machine coast was $32 per hour. With the new equipment, it was possible to transfer one of the workers to another department, and equipment cost increased by $18 per hour while output increased by four carts per hour.a) Compute the multifactor productivity (MFP) (labor plus equipment) under the Prior to buying the new equipment. The MFP (carts/$) = ( ) (round to 4 decimal places).b) Compute the % growth in productivity between the Prior to and after buying the new equipment. The growth in productivity = ( ) % (round to 2 decimal places)
An injector machine goes down roughly 20% of the time (the injector gums up and needs to be cleaned, a quick process). One operator is assigned to service three identical such machines. Each machine can produce 100 parts/h if running properly (i.e., not down). The operator is paid $10/h and each machine costs $20/h to operate. Consider 8hr/shift a) Please fill in the table below: b) How many parts can you produce per shift? c) What is the unit cost fper part for this operation? d) If you hire another operator at the same rate to assist the first operator, what is the unit cost now? e) Is it worth hiring another operator at the same rate to assist the first operator, in case more than one machine goes down at the same time?
A Company that makes shopping carts for supermarkets and other stores recently purchased some new equipment that reduces the labor content of the jobs needed to produce the shopping carts. Prior to buying the new equipment, the company used 7 workers, who produced an average of 87 carts per hour. Workers receive $15 per hour, and machine coast was $43 per hour. With the new equipment, it was possible to transfer one of the workers to another department, and equipment cost increased by $14 per hour while output increased by four carts per hour. a) Compute the multifactor productivity (MFP) (labor plus equipment) under the Prior to buying the new equipment. The MFP (carts/S) = Blank 1 (round to 4 decimal places). b) Compute the productivity changes between the Prior to and after buying the new equipment. The productivity growth = Blank 2% (round to 2 decimal places) Blank 1 Add your answer Blank 2 Add your answer
1) An operator is used for loading and unloading of parts to automated machines. Loading time is 1 minute; unloading time is 2 minutes, machining time is 30 minutes, Operator travel time between the machines including the inspection time is 4 minutes. Cost of operator is C₁=40 TL/Hour, cost of a machine is C₂-200 TL/Hour. What is the cost per unit of production if optimum number of machines is assigned to the operator? (Note: Times are given in minutes and costs are per hour) a) 231 TL/unit b) 6930 TL/unit c) 115.5 TL/unit d) 240 TL/unit e) 132 TL/unit 2) An operator is used for loading and unloading of parts to automated machines. Loading time is 1 minute; unloading time is 2 minutes, machining time is 30 minutes; Operator travel time between the machines including the inspection time is 4 minutes. Cost of operator is C1=40 TL/Hour; cost of a machine is C₂=200 TL/Hour. How many machines (integer number) should be assigned to the operator so that the total operator and machine costs…
A Printed Circuit Board (PCB) machine installs integrated circuits onto a board. Before starting to produce a board, the PCB machine requires a 16-minute setup. Once in production, the PCB machine requires only 0.19 minute per board. a. Currently, the PCB machine produces 525 boards between setups. Given this operating process, what is the capacity of the PCB machine (in boards per min)? b. Currently, the PCB machine produces 525 boards between setups. Given this operating process, what is the utilization of the PCB machine? c. Say the PCB machine produces 400 boards s between setups and demand is 2 boards per minute. Given the operating process, what is the avergae inventory of boards anf the PCB machine? d. Demand for boards occurs at the rate of 2 boards per minute. What is the smallest batch size such that the PCB machine does not constrain the flow rate through the process?
A copier store has four pieces of automatic equipment, but sometimes they are down because they need supplies, maintenance or repair. Each unit requires about two services every hour or, to be exact, each piece of equipment runs an average of 30 minutes before needing service. Service times vary greatly, from a simple service (such as pressing the reset switch or replenishing the paper) to disassembling the equipment in question. However, the average service time is five minutes. The time the equipment is down generates a loss of $60 per hour. The single employee who services the equipment earns $18 per hour. Using finite population analysis, answer the following questions: a. What is the average number of units idling? b. What is the average number of units still operating? c. What is the average number of units being serviced? d. The company is considering adding another manager at the same wage of $18 per hour. should it do so?
Joan has a small design and tailoring shop making custom outfits for women. She has two employees. Each employee only begins working on a dress when a customer order has been received and then she makes the dress from beginning to end. The average production time of a dress is 1.8 days, with a standard deviation of 2.1 days. Historically, Joan has been receiving orders with interarrival times of one day on average. The interarrival times of orders have a coefficient of variation of one. (Carry at least 4 decimal places in all intermediate calculations. Round your final answer to 2 decimal places.) What is the expected waiting time, in days, between when an order is received and when production begins on the dress? A. 9.12 days B. 6.50 days C. 1.23 days D.3.41 days
bama pie company's assembly line operations (the assembly line operates for six hundred minutes per day) comprise of eleven tasks, with the longest task time being 2.4 minutes and the shortest task time being 0.4 minutes; the sum of the task times is eighteen minutes. the firm is working on balancing its assembly line operations. the firm needs to produce 200 pies per day; to achieve this, the firm calculates the required cycle time as ---- minutes?
A bank is trying to determine which of two machinesshould be rented to process checks. Machine 1 rents for$10,000 per year and processes 1,000 checks per hour.Machine 2 rents for $15,000 per year and processes 1,600checks per hour. Assume that the machines work 8 hours aday, 5 days a week, 50 weeks a year. The bank must processan average of 800 checks per hour, and the average checkprocessed is for $100. Assume an annual interest rate of20%. Then determine the cost to the bank (in lost interest)for each hour that a check spends waiting for and undergoingprocessing. Assuming that interarrival times and servicetimes are exponential, which machine should the bank rent?