PLEASE ANSWER THIS QUESTION ASAP!!! A cooling coil removes a totalheat load of 41 kW from aconditioned air. The refrigeratingunit uses a 10.8-kW compressor.The ambient air around thecooling tower is at 26.15°C and40% RH. The inlet temperatureof the cooling water to the heatexchanger, which allows heattransfer between the refrigerantand the cooling water, is 20°C. Ifthe mass flow rate of the coolingwater is 1 kg/s, determine: Theexit temperature of the water asit leaves the heat exchanger in°C. The efficiency of the coolingtower in %.

Answered: Image /qna-images/answer/5d111e12-360d-46c7-8f84-a872a0117575.jpg

A cooling coil removes a total heat load of 41 kW from a conditioned air. The refrigerating unit uses a 10.8-kW compressor. The ambient air around the cooling tower is at 26.15°C and 40% RH. The inlet temperature of the cooling water to the heat

A cooling coil removes a total heat load of 41 kW from a conditioned air. The refrigerating unit uses a 10.8-kW compressor. The ambient air around the cooling tower is at 26.15°C and 40% RH. The inlet temperature of the cooling water to the heat

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 12RQ: Refrigerators currently being manufactured in the United States are using______as their refrigerant.

See similar textbooks

Similar questions

A vapor compression refrigeration systemhas an enthalpy of saturated liquid at the hightemperature side is 341.769 kJ/kg while at lowtemperature side is 131.27 kJ/kg and a latentheat of vaporization of 1312.63 kJ/kg. If themass flow rate of refrigerant is 0.50 kg/s.compute the tons of refrigeration.
developing 60kw of refrigeration using refrigerant R134a with condensing temperature 400C and evaporating -30 oC vapor is superheated before entering the compressor by 5 oC while the liquid will be sub-cooled by 6 oC, CalculateThecoefficient of performance and The total work done in the cycle and The mass flow rate of the refrigerant
Avapour compression refrigeration system using refrigerant F-12 is employed to produce 8640 kg of ice per day. The condensing and evaporating temperature of refrigerant are 48°C and -20°C respectively. Saturated liquid leaves the condenser and saturated vapour leaves the evaporator. Compression is isentropic, water at 35 C is used to form the ice. The temperature of ice should be-8°C. Heat flow into the orme tank from surroundings may be taken as 10% of total heat absorbed from water to form ice. Determine the power required to drive the compressor. Take specific heat of ice = 2,26 kJ/kg-K. Latent heat of Ice= 335 kJ/kg. Specific heat of water = 4.2 kJ/kg-K.
A vapour compression refrigeration system using refrigerant F-12 is employed to produce 8640 kg of ice per day. The condensing and evaporating temperature of refrigerant are 48°C and -20°C respectively. Saturated liquid leaves the condenser and saturated vapour leaves the evaporator. Compression is isentropic, water at 35°C is used to form the ice. The temperature of ice should be-8°C. Heat flow into the brine tank from surroundings may be taken as 10% of total heat absorbed from water to form ice. Determine the power required to drive the compressor. Take specific heat of ice = 2.26 kJ/kg-K. Latent heat of ice = 335 kJ/kg. Specific heat of water = 4.2 kJ/kg-K.
An ammonia system with a 158-kW evaporator operating at -1°C and a 35-kW evaporator operatingat -40°C uses flash gas removal and intercooling. The condensing temperature is 32°C. Thearrangement is as shown. How many kilograms per minute of ammonia are compressed by the high-pressure compressor?
The air handling unit of an air-conditioning plant supplies a total of 4500 cmm of dry air which comprsse by weight 20% fresh air at 40°C DBT and 27 C WBT and 80% recirculated air at 25°C DBT and 50% RH. The air leaves the cooling coil at 13°C saturated state. Calculate the total cooling load and room heat gain. Take Sp. volume of air entcring the cooling coil as 0.869 m/kg d.a. Given: Condition DBT WBT RH Sp. Humidity Enthalpy °C g.w.v.kg d.a. kJ/kg d.a. outside 40 27 17.2 85 AYC inside 25 50 10.0 50.8 100 9.4 37 ADP 13 JADP-Apparatus Dewpoint]
A plant using R134a refrigerant has a cooling capacity of 352 kW of refrigeration. It evaporates at 0 Cand condenses at 35 C, with the 5 of superheat at the evaporator outlet and 5 K of sub-cooling at the condenser outlet. Assuming isentropic compression and ignoring pressure drops in the piping, the evaporator and condenser, determi the following; a) The refrigeration effect b) The mass flow rate of refrigerant ) The compressor power d) The rate of heatrejection at the condenser e) The COP 0 The corresponding Carnot COP g) The percentage Carnot-efficiency
The large insulated flash chamber of a vacuum refrigeration plant is kept at low temperatureby a steam jet which pumps vapor to a condenser . The condensate pump removes thecondensate formed and an air ejector discharges air from the condenser to an air vent .Warm water returns enters the flash chamber at 13 deg C ; chilled water leaves the flashchamber at 4 deg C . The vapor leaving the flash chamber has a dryness factor of 97% andthe condenser inside temperature is 32 deg C . For 100 tons of refrigeration , determine thequantity in cubic meter per minute of chilled water at 4 deg C that the system can provide .A) 0.45 B) 0.56 C) 9.33 D) 0.75
A refrigeration system is to be used to cool 45,000kg water for 32 Celsius to 19 Celsius in 5 hours. The refrigerant is R-134A and the operating condition are evaporating pressure 810 kPa and 1800 kPa liquefication pressure. Determine COP, quantity of cooling water in the condenser for an increase in temperature of 7 Celsius compressor power, volume of flow rate entering the compressor. With schematic diagram. Using this table https://www.docdroid.net/VkxK8WH/refrigerant-134a-pdf
A compressor has an isentropic efficiency of 80% and compresses refrigerant. The refrigerantenters as a saturated vapor at 100kPa and leaves at 1000kPa with a mass flow rate of .5 kg/s.Determine:a. The temperature of the refrigerant at the exist of the compressor.b. The power input, in kW requiredc. Repeat parts A and C but assume it is isentropic
Refrigerant-134a enters the compressor of a refrigerator as superheated vapour at 0.20 MPaand 25°C at a rate of 0.07 kg/s, and it leaves at 1.2 MPa and 100°C. The refrigerant is cooledin the condenser to 44°C and 1.2 MPa, and it is throttled to 0.20 MPa. Disregarding any heattransfer and pressure drops in the connecting lines between the components,2.1 Calculate the rate of heat removal from the refrigerated space and the power input tothe compressor,2.2 Calculate the isentropic efficiency of the compressor, and2.3 Calculate the Coefficient of Performance of the refrigerator
A vapor compression refrigeration cycle undergoes wet compression and maintains the temperatureof the refrigerated space to -25C. The system uses R-12 refrigerant and undergoes isentropicexpansion to the inlet of the evaporator. The compressor discharges the refrigerant at saturatedvapor state at a condensing pressure of 1367 kPa. Determine:a) Determine the enthalpy of all statesb) Determine the quality of refrigerant entering the evaporatorc) Determine the quality of refrigerant leaving the evaporatord) Refrigerant effecte) Work of compressionf) COP If a liquid to suction heat exchanger was installed to prevent wet compression such that it allows 6Csub cooling of refrigerant and superheating to 8C. The expansion of refrigerant is no moreisentropic but isenthalpic. Therefore, determine:g) Enthalpy at different section of the cycleh) COP of the system compared to COP of standard vapor compression cycle.