please show full and detailed solution. A shell-and-tube heat exchanger with 2-shellpasses and 8-tube passes is used to heat ethylalcohol (C₂ = 2670 J/kg °C) in the tubes from 25°C to 70°Cat a rate of m= kg/s. The heating is to be done by water (C₁ =4190 J/kg °C) that enters the shell at 95°C and leaves at60°C. If the overall heat transfer coefficient is 800 W/m². °C,determine the heat transfer surface area of the heat exchangerusing (a) the LMTD method and (b) the ɛ-NTU method.

Given: Lets us consider the given data, m˙c=2.4 kgsCpc=2670 Jkgt1=25°Ct2=70°CCpr=4190…

alcohol (C, at a rate of m= kg/s. The heating is to be done by water (C₂ 4190 J/kg °C) that enters the shell at 95°C and leaves at 60°C. If the overall heat transfer coefficient is 800 W/m². °C, determine the heat transfer surface area of the heat exchanger using (a) the LMTD method and (b) the ɛ-NTU method. . A shell-and-tube heat exchanger with 2-shell passes and 8-tube passes is used to heat ethyl 2670 J/kg °C) in the tubes from 25°C to 70°C = . =

alcohol (C, at a rate of m= kg/s. The heating is to be done by water (C₂ 4190 J/kg °C) that enters the shell at 95°C and leaves at 60°C. If the overall heat transfer coefficient is 800 W/m². °C, determine the heat transfer surface area of the heat exchanger using (a) the LMTD method and (b) the ɛ-NTU method. . A shell-and-tube heat exchanger with 2-shell passes and 8-tube passes is used to heat ethyl 2670 J/kg °C) in the tubes from 25°C to 70°C = . =

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Steam 90°C 10. A shell-and-tube process heater is to be selected to heat water (Cp = 4190 J/kg-°C) from 20°C to 90°C by steam flowing on the shell side. The heat transfer load of the heater is 600 kW. If the inner diameter of the tubes is 1 cm and the velocity of water is not to exceed 3 m/s, determine how many tubes need to be used in the heat exchanger. 20°C Water
A shell-and-tube heat exchanger with 2- shell passes and 12-tube passes is used to heat water (Cp = 4180 J/kg °C) with ethylene glycol (Cp 2680 J/kg °C). Water enters the tubes at 22°C at a rate of 0.5 kg/s and leaves at 70°C. Ethylene glycol enters the shell at 110°C and leaves at 60°C. If the overall heat transfer coefficient based on the tube side is 280 W/m2 °C, determine the rate of heat transfer. = Select one: a. 97.8 kW b. 94.1 kW c. 160.5 kW X d. 132.4 kW The correct answer is: 94.1 kW
A Liquid-to-Liquid counter flow heat exchanger is used as part of an auxiliary system at the facility. The Heat exchanger is used to heat a cold fluid from 48.89 ℃ to 154.44℃. Assuming that the hot fluid enters 260℃ and leaves at 204.44℃. Calculate the LMTD. ANSWER:129℃
Steam at 1.4 MPa and 300°C enters the shell side of a shell and tube heat exchanger. It leaves as liquid at 1.4 MPa and 150°C at a rate of 5000 kg/hr. The steam condenses on the outside by water flowing inside the tubes. The water enters at 20°C and experiences a temperature rise of 25°C. What is the water flow rate?
The stack gas from a chemical operation contains noxious vapors that must be condensed by lowering its temperature from 315C to 35C. The gas flow rate is 0.70 m^3/s. Water is available at 10C at 1.26kg/s. A counterflow heat exchanger will be used with a water flowing through the tubes. The gas has a specific heat of 1.10 kJ/kg-K and a gas constant of 0.26 kJ/kg-K. What is the rate of heat lost by the gas in KJ?
The stack gas from a chemical operation contains noxious vapors that must be condensed by lowering its temperature from 315C to 35C. The gas flow rate is 0.70 m^3/s. Water is available at 10C at 1.26kg/s. A counterflow heat exchanger will be used with a water flowing through the tubes. The gas has a specific heat of 1.10 kJ/kg-K and a gas constant of 0.26 kJ/kg-K. What is the rate of heat lost by the gas? answ. 186.956 kJ 196.895 kJ 168.965 kJ 169.856 kJ
A fluid is flowing through a heat exchanger (HEX) at a rate of 2500 kg/h. The heat exchanger supplies 115,600 kJ/h. The inlet temperature of the fluid is 80C. Determine the outlet temperature of the product. The product specific heat 3.9 kJ/kg C
A counter flow double pipe heat exchanger using super heated steam is used to heat water at the rate of 10500 kg/hr. The steam enters the heat exchanger at 180degC and leaves at 130degC. The inlet and exit temperature of water are 30degC and 80degC respectively. If the overall heat transfer coefficient from steam to water is 814 W/m2 K, calculate the heat transfer area. What would be the increase in area if the fluid flow were parallel?
A STHX 1-4 heat exchanger is being used to heat a flow of liquid toluene. Toluene enters the heat exchanger at 5 ° C with a volumetric flow rate of 18 L / s. Hot water is being used to heat the toluene. The water enters the heat exchanger at 70 ° C and at a volumetric flow rate of 13 L / s. The product UA of the heat exchanger is 25 kW / K. Determine the heat transfer rate (kW) Toluene Properties: Density: 864.8 kg / m ^ 3 cp: 1,692 kJ / kgK Properties of Water: Density: 982.3 kg / m ^ 3 cp: 4,186 kJ / kgK
Steam at 1.6 MPa and 250°C is being throttled by an adiabatic steam valve to reduce its pressure to 0.5 MPa before it is being delivered to a heat exchanger (shown in Figure 1). At valve outlet, the steam at18,000 kg/hour flow into an adiabatic heat exchanger as hot fluid. Cooling water from water tap is used to cool the steam by circulating the water through the tubes inside the heat exchanger. At heat exchanger outlet, the cooling water temperature increased by 20°C as it passing through the heat exchanger, and steam leaves the heat exchanger as saturated vapor at 200 kPa. Determine: (a) the temperature of the steam at heat exchanger inlet; and (b) the mass flow rate of the cooling water required. (Note: Use specific heat of cooling water at constant pressure as 4.18 kJ/kg.C) Heat Exchanger Steam Steam valve Cooling Water
With reference to the schematic below, a thin-walled double-pipe counter-flow heat exchanger is to be used to cool a hot fluid (cp=2200 J/kg.°C) from 150°C to 50°C at a rate of 2 kg/s by water (cp = 4180 J/kg°C) that enters at 22°C at a rate of 1.5 kg/s. The diameter of the tube is 2.5 cm, and its length is 6 m. Determine the overall heat transfer coefficient, U of this heat exchanger. Hot fluid 150°C Cold water 22°C 150°C Assumptions: 1.Steady operating conditions exist. 2 The heat exchanger is well-insulated so that heat loss to the surroundings is negligible.
For a production of 7000 liter of hot water at 75 °C per hour, a boiler fired with natural gas (Calorific value of 42 MJ/kg) and shell and tube heat exchanger is used. The cold water inters the heat exchanger at 8 °C and pressure of 300 kPa as shown in Figure Q4. Bolier 80°c 60°℃ 75°C €29.9 8°C Figure Q4 The circulation water inters the boiler at 60 °C and leaves at 80 °C and inters the shell side of the heat exchanger with a heat convection coefficient of 4000 W/m² °C. The hot water tubes is thin with internal diameters of 16 mm and there are 10 tubes. a) Calculate the transferred heat flow b) Calculate the amount of natural gas required in kg/hour assuming that the boiler ef- ficiency is 90% and all the heat transferred from the circulation water is gained by the tubes hot water. c) Calculate the internal heat convection coefficient, for the hot water tubes d) Calculate the overall heat transfer coefficient e) Calculate the tubes service area required for the heat exchanger