A 2x2-m glass window, 1 cm thick is subjected to 10°C and 3°C inner and outer temperatures respectively. If the thermal conductivity of the glass is 0.78 W/m-"C, what is the amount of heat loss, in kJ, through the glass over a period of 5 hours?
Q: A metallic solid cylinder has a diameter of 11 cm and initial temperature of 300°C. The cylinder is…
A: GIVEN:diameter =11 cminitial temperature =300°Cenvironment temperature =50°C heat transfer…
Q: The wall of a cold room consists of a layer of cork sandwiched between outer and inner walls of…
A: Given Data The heat transfer coefficient is :Q=42 W/m2 Inside temperature is : Ti=-20°C Atmospheric…
Q: Q1.1 : The inner and outer surfaces of a 5-m x 6-m brick wallof thickness 30 cm and thermal…
A: Given: The temperature at the inner surface of the wall is Ti=20°C, The temperature at the outer…
Q: The inner and outer surfaces of a 5-m x 6-m brick wall of thickness 30 cm and thermal conductivity…
A:
Q: Calculate the heat transfer in kj per hour through a solid brick wall 8 cm, 3 m high and 220 mm…
A:
Q: A furnace wall in the pharmaceutical industry is constructed from 220 mm of heat resistan clay…
A:
Q: The inside and outside surfaces of a 1-cm thick, 4-m squared-shaped
A: Given data⇒ Thickness (t)=1 cm=0.01 m Side of square(a)=4 m Inside temperature T1=90C=9+273T1=282 K…
Q: How to predict the detailed thermal properties of specific physical systems ?
A: Thermal properties When applied to solid bodies, thermal properties are defined as: Material's…
Q: Q2/ The inner and outer surfaces of a 0.5-cm- thick 2-m x2-m window glass in winter are 10°C and…
A: The above question is based on Heat transfer through conduction.
Q: A 0.2-m-long and 25-mm-thick vertical plate (k = 15 W/m-K) separates the hot water from the cold…
A:
Q: A circuit board houses on its surface 120 closely spaced logic chips, each dissipating 0.12 W. If…
A: Solution:-Each Chip dissipates = 0.12WTotal Number of chip = 120Heat disripates during = 10-hr(a)…
Q: Which of the following provides the basis of convection heat transfer? Group of answer choices…
A:
Q: Hot air at 80°C is blown over a 2-m x 4-m flat surface at 30°C. If the convection heat transfer…
A: Given, Temperature of surface = TS = 80 oC Area of surface = 2 m x 4 m = 8 m2 Air temperature = T∞ =…
Q: 1. To avoid overheating, natural convection analysis is to be considered. If the minimum allowable…
A: Given Data Qmax=30WTB=37°CT0=23°Cθ=?L=0.69mB=1.22m
Q: Q3/ The north wall of an electrically heated home is 20 fi long, 10 ft high, and I ft thick, and is…
A: Surface area of the wall is A=20 ft×10 ft=200 ft2 Rate of heat transfer through the wall in the…
Q: An aluminum plate, with dimensions of 3 cm × 3 cm × 5 cm (length, width, and thickness,…
A: Given:Volume,V=3*3*5 =45 cm3q=150 J/sρ=2700 Kg/m3t=10 secmass 0f aluminium plate,m=2700*45*10-6…
Q: A copper plate, with dimensions of 3 cm x 3 cm x 5 cm (length, width, and thickness, respectively),…
A: Given Volume, V = 3 cm x 3 cm x 5 cm = 45 x 10-6 m3 Density = 8900 kg/m3 Time, t…
Q: lumped system with a volume of 0.003 m³ and a surface area of 0.08 m² is made of a material with…
A:
Q: ayer at a rate of 1.1 x 104 W/m2. The room temperature is 27 °C. (a) Determine the thermal…
A:
Q: The roof of an electrically heated home is 9 m long, 12 m wide, and 0.50 m thick, and is made of a…
A: GIVEN DATA - AREA OF ROOF A=9*12m2 THICKNESS dx=0.50m Thermal conductivity k=0.8W/m'C T1=25'C T2=5'C…
Q: One wall of a refrigerated warehouse is 10.0-m-high and 5.0-m-wide. The wall is made of three…
A: Consider the diagram shown below for the given wall.
Q: Consider a 150-W incandescent lamp. The filament of the lamp is 5.7-cm long and has a diameter of…
A: GIVEN DIAMETER OF FILAMENT =D =1.2MM=0.0012 M LENGHT OF FILAMENT =L= 5.7 CM=0.057 M ASSUMPTION…
Q: Question 2: A circuit board houses on its surface 120 closely spaced logic chips, each dissipating…
A:
Q: What are the equations for heat transfer from conductions, convection, and radiation?
A: The conduction heat transfer mainly occurs in solid to solid heat transfer and its equation is…
Q: 5.0 cm thick plate of ceramic (k = 2.0 W/m K) has a temperature difference of 30°C across it. If the…
A:
Q: The inner and outer surfaces of a 0.3 cm thick 1.8 m x 2.5 m window glass in winter are 20°C and…
A:
Q: 2. Consider steady heat transfer between two large parallel plates at constant temperatures of T1 =…
A: Given data: T1=295 KT2=155 KL=2 cm Need to determine the rate of heat transfer.
Q: Q1. A 1200-Wiron is left on the ironing board with its base exposed to the air (Figure 1). About 90…
A:
Q: The walls of a food storage facility are made of a 2-cm-thick layer of wood (k =0.1 W/m-K) in…
A:
Q: 1- The heat flux through a slab made of wood with 50 mm thick, whose inner and outer surface…
A: Given Thickness of block = 50 mm = 0.05 m Internal temperature = 40 oC External temperature = 20 oC…
Q: Calculate the heat transfer in kj per hour through a solid brick wall 7 cm, 3 m high and 218 mm…
A: GIVEN DATA - AREA OF BRICK A=0.07*3=0.21m2 THICKNESS OF WALL dx=218mm =0.218m K=0.6 W/mK T1=17'C…
Q: What four processes are involved in heat transfer?
A: Generally, there are 4 modes of heat transfer:- Conduction Convection Radiation Evaporation…
Q: Question 1.1: The inner and outer surfaces of a 5-m x 6-m brick wallof thickness 30 cm and thermal…
A: Outer temperature = 20C Inner diameter = 5C Area = 30 m2 Thickness = 30 cm thermal conductivity =…
Q: A 1600-W iron plate has a thickness of 5 mm, cross-sectional area of 300 cm^2. The room convection…
A:
Q: . The wall of a cold room consists of a layer of cork sandwiched between the outer and inner walls…
A:
Q: The temperatures on the left and right surfaces of a 15-cm thick wall are 375°C and 85°C. The wall…
A: Given data, k= 0.78 W/m°C Density is 2700 kg/m3 Cp= 0.84 kJ/kgK Need to find the heat flux q =…
Q: The inner and outer surfaces of a 0.5-cm-thick 2-m × 2-m window glass in winter are 15°C and 6°C,…
A: Thickness of the window L=0.5 cm Cross sectional area of the window A=2 m ×2 m Inner surface…
Q: 2. Consider steady heat transfer between two large parallel plates at constant temperatures of T1 =…
A: As per given Temperature T1=295k Temperature T2=155k Distance Of two plates= 2cm KAir=0.01979 We…
Q: A 20-cm diameter copper ball is to be heated from 110°C to an average temperature of 170°C in 90…
A:
Q: In a concentrated solar power plant, molten salt tank is used to store the thermal energy from the…
A:
Q: A 1500-W iron plate has a thickness of 3 mm, cross-sectional area of 320 cm^2 . The room convection…
A: Given, Q=1500 W, t=3 mm, A=320 cm2=320×10-4 m2h=25 W/m2.K, T∞=23 °C, T1=950 °C, T2=300 °Cρ=2850…
Q: Q3/ The north wall of an electrically heated home is 20 ft long, 10 ft high, and 1 ft thick, and is…
A:
Q: Question 2:A circuit board houses on its surface120 closely spaced logic chips, each dissipating…
A: closely Logic chips = 120 Heat dissipation, Q = 0.12 W Heat transfer is negligible Area of the…
Q: A metallic solid cylinder has a diameter of 11 cm and initial temperature of 300°C. The cylinder is…
A: A metallic solid cylinder has a diameter of 11 cm and an initial temperature of 300o C. The cylinder…
Q: In a warm room, a naked resting person has a skin temperature of 33°C If the room temperature is…
A: skin temp = 33°C =33+273=303Kroom temp=29°C =29+273=302Kbody surface area=1.5m2heat transfer…
Q: A furnace wall comprises three layers of thickness 250 mm, 100 mm, and 150 mm with thermal…
A:
Q: (a) What is the rate of energy loss in watts per square meter through a glass window 2.9 mm thick if…
A: (Qa) In the first case it is given that: Thermal conductivity of glass = 1 W/m-K T1 = 78 oF T2 = -15…
Q: Calculate the heat transfer in kj per hour through a solid brick wall 9 cm, 3 m high and 219 mm…
A:
Q: The inner and outer surfaces of a 0.5-cm-thick 2-m by 2-m window glass in winter are 10°C and 3°C,…
A:
Step by step
Solved in 2 steps with 1 images
- A pipe carrying superheated steam in a basement at 10C has a surface temperature of 150C. Heat loss from the pipe occurs by radiation (=0.6) and natural convection (hc=25W/m2K). Determine the percentage of the total heat loss by these two mechanisms.Heat is lost through the glass pane of a window. The thickness of the glass is 3 mm, and the window is 0.9 m by 1.8 m. The thermal conductivity of glass is 0.8 W/mK. If the temperature difference across the glass is 17 K, what is the total heat transfer through the pane of glass? Give your answer in Watts to the nearest integer.2-66 One end of a copper rod 30 cm long is firmly connected to a wall that is maintained at 200°C. The other end is firmly connected to a wall that is maintained at 93°C. Air is blown across the rod so that a heat-transfer coefficient of 17 W/m2 .°C is maintained. The diameter of the rod is 12.5 mm. The temperature of the air is 38°C. What is the net heat lost to the air in watts?
- A glass container has a total wall area (including the lid) of 1.75 m2 and a wall thickness of 1.5 cm. It's filled with 1000 g of ice at 0 C. How many seconds will it take to completely melt all the ice? (Latent heat of fusion is 80 calg and Thermal conductivity of glass is 0.8 W/m K) O 120 s 14, 400 s 2, 800 s 200 sA hot steel plate with a surface area of 1.93 m2 and a constant surface temperature of 169°C is exposed to ambient air at 21°C. If the convection heat transfer coefficient is 17.1 W/m2· K, what is the rate of heat transfer (in W) from the plate to the air [round your final answer to zero decimal places]?The inner and outer surface temperature of a 5.1 mm thick glass window are 17.6 and 7.1 oC, respectively. What is the heat loss in W through a window that is 1 m by 3 m on a side? The thermal conductivity of glass is 1.4 W/mK. Please keep one decimal and take positive value for the final answer.
- A wall receives sunlight from 7:30 am to 6:30 pm. The amount of energy it receives is 420 W/m2 and 15% is emitted as radiation into the surrounding air. The inside of the wall has a temperature of 48°C. If the wall is 7 m long and 6 m high and 30 cm thick, what is the temperature when x=20 cm?Required information A 14-cm x 20-cm circuit board houses on its surface 100 closely spaced logic chips, each dissipating 0.06 W in the environmentat 40°C. The heat transfer from the back surface of the board is negligible. If the heat transfer coefficient on the surface of the board is 10 W/m2.K, Determire the surface temperature of the chips in °C. (Round the final answer to two decimal places.The inner and outer surfaces of a 0.5-cm-thick 2-m x 2-m window glass in winter are 10°C and 3°C, respectively. If the thermal conductivity of the glass is 0.78 W/m . °C, deter[1]mine the amount of heat loss, in kJ, through the glass over a period of 5 hours. What would your answer be if the glass were 1 cm thick?
- It is designed in such a way that the internal temperature of a commercial heat treatment furnace can reach up to 165 oC. All surfaces of the furnace consist of firebrick (10 cm), insulation material and sheet metal (3mm) from the inside out. Given that the outdoor temperature is 22 oC, the outer sheet will be allowed to go up to 35 oC, which is a temperature that will not disturb in contact with hands. In this case, determine the insulation material thickness to be used. The thermal conductivity coefficient of the insulation material is insulation 0.066 W / m oC, 60 W / m oC for sheet metal and 115 W / m oC for firebrick. Indoor heat transfer coefficient will be accepted as 25 W / m2 oC and 12 W / m2 oC for outdoor environment.A 2m^2 wall of 1010steel is 8 mm thick. If the outside of the wall is100 °C, andyou measure aheat flux of 80 kW/m2coming off the wall, what is the temperature of the insideof thewall?The handle of a saucepan, 30 cm long and 2 cm in diameter, is subjected to 100 degree Celsius temperature during a certain cooking operation. The average unit surface conductance over the handle surface is 7.35 W/m2 degree in the kitchen air at 24 degree Celsius. The cook is likely to grasp the last 10 cm of the handle and hence the temperature in this region should not exceed 38 degree Celsius. What should be the thermal conductivity of the handle material to accomplish it? The handle may be treated as a fin * .insulated at the tip