You've experienced convection cooling if you've ever extended your hand out the window of a moving vehicle or into a flowing water stream. With the surface of your hand at a temperature of 30°C, consider the two following conditions. Condition A: a vehicle speed of 35 km/h in air at -5°C with a convection coefficient of 40 W/m²-K. Condition B: a velocity of 0.2 m/s in a water stream at 10°C with a convection coefficient of 500 W/m²-K. What is the convection heat flux for the following? Condition A: Tair i W/m2 Condition B: qwater W/m?

You've experienced convection cooling if you've ever extended your hand out the window of a moving vehicle or into a flowing water stream. With the surface of your hand at a temperature of 30°C, consider the two following conditions. Condition A: a vehicle speed of 35 km/h in air at -5°C with a convection coefficient of 40 W/m²-K. Condition B: a velocity of 0.2 m/s in a water stream at 10°C with a convection coefficient of 500 W/m²-K. What is the convection heat flux for the following? Condition A: Tair i W/m2 Condition B: qwater W/m?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.58P

See similar textbooks

Similar questions

Determine the rate of heat loss from the wall of a building resulting from a 16 km/h wind blowing parallel to its surface. The wall is 24 m long and 6 m high, its surface temperature is 27C, and the temperature of the ambient air is 4C.
An electrical transmission line of 1.2-cm diameter carries a current of 200 amps and has a resistance of 310-4 ohm per meter of length. If the air around this line is at v, determine the surface temperature on a windy day, assuming a wind blows across the line at 33 km/h.
You've experienced convection cooling if you've ever extended your hand out the window of a moving vehicle or into a flowing water stream. With the surface of your hand at a temperature of 30°C, consider the two following conditions. Condition A: a vehicle speed of 35 km/h in air at -5°C with a convection coefficient of 40 W/m².K. Condition B: a velocity of 0.2 m/s in a water stream at 10°C with a convection coefficient of 600 W/m²-K. What is the convection heat flux for the following? Condition A: i W/m2 Condition B: gwater i W/m?
You've experienced convection cooling if you've ever extended your hand out the window of a moving vehicle or into a flowing water stream. With the surface of your hand at a temperature of 30°C, consider the two following conditions. Condition A: a vehicle speed of 35 km/h in air at -9°C with a convection coefficient of 40 W/m².K. Condition B: a velocity of 0.2 m/s in a water stream at 10°C with a convection coefficient of 500 W/m².K. What is the convection heat flux for the following? Condition A: W/m² d'air = i Condition B: dwater = i W/m²
You've experienced convection cooling if you've ever extended your hand out the window of a moving vehicle or into a flowing water stream. With the surface of your hand at a temperature of 30°C, consider the two following conditions. Condition A: a vehicle speed of 35 km/h in air at -5°C with a convection coefficient of 40 W/m2-K. Condition B: a velocity of 0.2 m/s in a water stream at 10°C with a convection coefficient of 700 W/m²-K. What is the convection heat flux for the following? Condition A: i W/m? air Condition B: qwater W/m? i
Fluid flows over a flat plate, 1.2 m long. The direction of flow is along the length of the plate and parallel to the surface of the plate. The plate is held at a constant temperature of 283 K. Velocity and temperature profiles are assumed to be linear inside the boundary layers. The free stream temperature of the fluid is 340 K and it travels at 5 m/s. The fluid properties are as follows: thermal conductivity = 0.029 W/mK, density = 0.92 kg/m3, viscosity = 12.9 x 10-6 Pa.s, and specific heat capacity = 1003 J/kgK. The value of the Nusselt number at the tailing edge of the flat plate is: [ans1] The convective heat transfer from the middle of the flat plate is: [ans2] W/m2 step by step working out piease, hit final answer is 145, -281 respectively
An average adult man requires approx. 2000 calories of energy daily. Considering an average adult man as a cylinder of 1.6 m and diameter 0.3 m. calculate the thickness of the woolen jacket required to keep him warm (25 °C) during a visit to a hill station with ambient temperature of 5 °C and wind velocity of 2.6 Km/Hr. Assume the thermal conductivity of the wool as 0.5 W/mK.
Small potato balls of 0.5 cm radius (can be approximated as a sphere) baked in the oven and initially at a uniform temperature of 170°C. Assume, potatoes have a density of 650 kg/m³, specific heat of 3400 J/kgk and conductivity of 1 W/mK. You want to eat potatoes quickly without burning your tongue so that you have decided to cool them down with forced convection. Air h, Te hot potato initially @ T; Air temperature is 20°C and the convective heat transfer coefficient is 80 W/m?K. Calculate the time (in seconds) required for its surface temperature to drop 130°C. Round the value you calculated and write it as an integer!!! For example, if you find 8.2, write is as 8. Answer:
1.0 Consider the following fluids at a film temperature of 300 K in parallel flow over a flat plate with velocity of 1 m/s: atmospheric air, water, engine oil, and mercury. For each fluid, determine the velocity and thermal boundary layer thicknesses, in mm, at a distance of 20 mm from the leading edge.
Small potato balls of 0.5 cm radius (can be approximated as a sphere) baked in the oven and initially at a uniform temperature of 160°C. Assume, potatoes have a density of 650 kg/m³, specific heat of 3400 J/kgK and conductivity of 1 W/mK. You want to eat potatoes quickly without burning your tongue so that you have decided to cool them down with forced convection. Air h, T. hot potato initially Air temperature is 20'C and the convective heat transfer coefficient is 140 W/m²K. Calculate the time (in seconds) required for its surface temperature to drop 90°C. Round the value you calculated and write it as an integer!! For example, if you find 8.2, write is as 8. Answer:
John is employed by a new food processing plant where eggs are to be boiled in large quantities to produce egg salad. John has been assigned the task of determining the minimum cooking time for the eggs, utilizing his vast knowledge of heat transfer. As a basis of calculation, he assumed that the eggs are perfect spheres with a diameter of 5 cm and uniform material properties (r =1000kg/m'; Cp = 3300 J/(kg K) and k=0.75 W/(m-K)). The eggs were taken from a cold storage room at 5°C and immediately put into pots of boiling water at 100°C. The convective heat transfer coefficient of the water is h = 1500 W/m°K. For health safety reasons, the plant requires that the entire egg must be at a temperature above 75°C for at least 20 seconds in order for the cooking process to be complete. a. What is the minimum time necessary to cook the egg to company specifications? b. In the testing lab, John forgot to remove a batch of eggs, and they remained in the cooking pot long enough to reach a…
Small potato balls of 0.5 cm radius (can be approximated as a sphere) baked in the oven and initially at a uniform temperature of 160°C. Assume, potatoes have a density of 650 kg/m, specific heat of 3400 J/kgK and conductivity of 1 W/mK. You want to eat potatoes quickly without burning your tongue so that you have decided to cool them down with forced convection. Air h, T. hot potato initially Air temperature is 20°C and the convective heat transfer coefficient is 140 W/m?K. Calculate the time (in seconds) required for its surface temperature to drop 90°C.