Water at 43.3°C flows over a large square plate at a velocity of 20 cm/s. The plate is 2 m long (in the flow direction) and its surface is maintained at a uniform temperature of 10.0°C. The width of the plate is 2 m. Calculate the steady rate of heat transfer for the entire width of the plate in watts (W). The properties of water at the film temperature of (Ts+ To)/2 = (10 + 43.3)/2 = 27°C are p = 996.6 kg/m3, k= 0.610 W/m-°C, u= 0.854 x 10-3 kg/m-s, and Pr = 5.85. The steady rate of heat transferlper unit width of the plate is W.

Water at 43.3°C flows over a large square plate at a velocity of 20 cm/s. The plate is 2 m long (in the flow direction) and its surface is maintained at a uniform temperature of 10.0°C. The width of the plate is 2 m. Calculate the steady rate of heat transfer for the entire width of the plate in watts (W). The properties of water at the film temperature of (Ts+ To)/2 = (10 + 43.3)/2 = 27°C are p = 996.6 kg/m3, k= 0.610 W/m-°C, u= 0.854 x 10-3 kg/m-s, and Pr = 5.85. The steady rate of heat transferlper unit width of the plate is W.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.7P: 5.7 The average Reynolds number for air passing in turbulent flow over a 2-m-long, flat plate is ....

See similar textbooks

Similar questions

Water at 43.3°C flows over a large square plate at a velocity of 28 cm/s. The plate is 1.2 m long (in the flow direction) and its surface is maintained at a uniform temperature of 10.0°C. The width of the plate is 1.2 m. Calculate the steady rate of heat transfer for the entire width of the plate in watts (W). The properties of water at the film temperature of (Ts + T∞)/2 = (10 + 43.3)/2 = 27°C are ρ = 996.6 kg/m3, k = 0.610 W/m·°C, μ = 0.854 × 10–3 kg/m·s, and Pr = 5.85. The steady rate of heat transfer per unit width of the plate is ___ W.
Water at 43.3°C flows over a large square plate at a velocity of 20 cm/s. The plate is 2 m long (in the flow direction) and its surface is maintained at a uniform temperature of 10.0°C. The width of the plate is 2 m. Calculate the steady rate of heat transfer for the entire width of the plate in watts (W). The properties of water at the film temperature of (Ts + T∞)/2 = (10 + 43.3)/2 = 27°C are p = 996.6 kg/m³, k= 0.610 W/m-°C, μ = 0.854 x 10-3 kg/m-s, and Pr = 5.85. The steady rate of heat transfer per unit width of the plate is W.
Q : Engine oil at 80°C flows over a 10-m-long flat plate whose temperature is 30°C with a velocity of 2.5 m's. Determine the rate of heat transfer over the entire plate per unit width. Take the properties of the oil at film temperature
Oil flow in journal bearing can be approximated as parallel flow between two large plates with one plate moving and the other stationary. Determine the velocity, temperature distributions, the maximum temperature, the rate of heat transfer and the mechanical power wasted in oil. Take properties of oil at 50°C are given to be, k=0.17W/m. K, and u=0.05N.s/m2.
Water at 10°C is is flowing at 0.8 m/s across a long cylinder that is made of a material that generates heat by 8.5 kW/m³. The cylinder has a diameter of 0.3 m. Thermal conductivity of the cylinder is 28 W/m. °C. Assuming the film temperature is same as the water temperature, find out the surface temperature of the cylinder. Then comment whether the assumption related to film temperature was reasonable. Ts = 10'33 °℃
Hot water vapor flows in parallel over the upper surface of a 1-m-long plate. The velocity of the water vapor is 8 m/s at a temperature of 450°C. A copper-silicon (ASTM B98) bolt is embedded in the plate at mid length. The maximum use temperature for the ASTM B98 copper-silicon bolt is 149°C (ASME Code for Process Piping, ASME B31.3-2014, Table A-2M). To devise a cooling mechanism to keep the bolt from getting above the maximum use temperature, it becomes necessary to determine the local heat flux at the location where the bolt is embedded. If the plate surface is kept at the maximum use temperature of the bolt, what is the local heat flux from the hot water vapor at the location of the bolt? Given that the properties of water vapor at the film temperature of Tf 300°C are (Table A-16) Pr = 0.9401, k = 0.04345 W/m-K, and v= 5.340 x 10-5 m²/s. Water vapor To = 450°C Bolt T₁ The local heat flux from the water vapor at the location where the bolt is embedded is W/m²
Air at 27 ⁰C and 1 atm flows over a flat plate at a velocity of 3m/s, assuming the plate is heated its entire length to a temperature of 70⁰C. Heat transferred in first 25 cm of the plate is?
A 20degC water flows to 50cmx60cm flat plate with velocity of 6m/s . The flat plate surface temperature is maintained at 40deg C. The water flows parallel to the 50cm side of the plate. If the kinematic viscosity of water is 78x10-8 m2/s, What is the local heat flux (Q/A) at the end of the plate (k=0.86 W/m deg C, Re=3840000, and Pr=0.7)? Round your answer to 2 decimal places.
Hot carbon dioxide exhaust gas at 1 atm is being cooled by flat plates as shown in Fig 3. The gas at 220°C flows in parallel over the upper and lower surfaces of a 2-m-long flat plate at a velocity of 2 m/s. If the flat plate srface temperature is maintained at 80°C, de termine the local convection heat transfer coefficient at 1 m from the leading edge, the average convection heat transfer rate over the e ntire plate, and the total heat flux transfer to the plate. 11. 111. COo, T. Fig 3
Q9) Consider a 50 cm diameter and 95 cm long hot water tank. The tank is placed on the roof of a house. The water inside the tank is heated to 80°C by a flat-plate solar collector during the day. The tank is then exposed to windy air at 18°C with an average velocity of 40 km/h during the night. Estimate the temperature of the tank after a 45 mm period. Assume the tank surface to be at the same temperature as the water inside, and the heat transfer coefficient on the top and bottom surfaces to be the same as that on the side surface.
Determine the convection heat transfer coefficient (in W/m2-K) for air flowing at a velocity of 3 m/s in a 10-cm diameter and 10-m long tube. Air enters the tube at 10°C and leaves at 20°C, i.e. air is heated. Take the property of air at 1 atm and assume flow to be fully developed. For air at 1 atm: Temperature k, W/m-K v, m?/s Pr 15°C 0.02476 1.470x10-5 0.7323 20°C 0.02514 1.516×10-5 0.7309 25°C 0.02551 1.562x105 0.7296
Determine the convection heat transfer coefficient (in W/m²-K) for air flowing at a velocity of 3 m/s in a 10-cm diameter and 10-m long tube. Air enters the tube at 10°C and leaves at 20°C, i.e. air is heated. Take the property of air at 1 atm and assume flow to be fully developed. For air at 1 atm: Temperature k, W/m-K v, m?/s Pr 15°C 0.02476 1.470x105 0.7323 20°C 0.02514 1.516x10-5 0.7309 25°C 0.02551 1.562x105 0.7296 Hint: When the fluid temperature changes, we use its properties at mean temperature, unless otherwise specified. Round vour answer to2 decimal nlaces