Two columns are D= 8,954 mm away from each other measured center to center. The loads supported by the columns are listed below. Effective soil pressure is 198 kPa. D Left Column (494 mm X 623 mm) DL=603 kN LL-662 kN Right Column (474 mm X 622 mm) (474 mm side is parallel to the long side of the footing) DL=739 kN LL=657 kN If the distance of the left column to the left edge of the footing is A=723 mm Calculate the longer dimension of the footing in mm in exact values.

Two columns are D= 8,954 mm away from each other measured center to center. The loads supported by the columns are listed below. Effective soil pressure is 198 kPa. D Left Column (494 mm X 623 mm) DL=603 kN LL-662 kN Right Column (474 mm X 622 mm) (474 mm side is parallel to the long side of the footing) DL=739 kN LL=657 kN If the distance of the left column to the left edge of the footing is A=723 mm Calculate the longer dimension of the footing in mm in exact values.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Problem 1 A 300 mm x 400 mm column is to be supported by a 2 m x 2 m x 0.4 m thick footing @ its center. Service DL = 520 kN, service LL = 320 kN, CC to bar centroid is 90 mm, fc' = 21 MPa and fy = 414 MPa. %3D 300 400 300 400 Determine the critical wide beam shear stress. (Nominal and ultimate) Determine the critical punching shear stress. (Nominal and ultimate) Determine the required number of 20 mm ø bars parallel to the critical side.
Problem 2. A rectangular footing supports a square column concentrically. Given: Footing Dimensions: 3.0m wide x 4.5m long and 0.75m depth Column Dimensions: 0.40m x 0.40m Concrete, fc’ = 21MPa Steel, fy = 275MPa Concrete cover to the centroid of steel reinforcements = 110mm Unit weight of concrete = 23.5kN/m3 Unit weight of soil = 16kN/m3 Determine the concentrated load that the footing can carry based on beam action. Calculate the concentrated load that the footing can carry based on two-way action. If the allowable soil pressure at service loads is 200kPa, what column axial load (unfactored) in kN can the footing carry if depth of earth fill is 2.0m above the footing?
An eccentric footing shown has the following loads which acts on the center of the column: Pdl=400 kN Pll=650 kN Thickness of footing is 400mm f'c= 29 MPa; fy =420 MPa db=20mm Calculate the following: 1. The minimum and maximum soil pressure due to service loads 2. The minimum and maximum soil pressure due to factored loads
Design a square pad footing with an overall depth of 600mm, cover to the reinforcements 50mm with 20mm diameter reinforcement bars in both directions. The footing carries a 400mm square column with a dead load of 1050KN and imposed load of 300KN. The safe bearing capacity of the soil is 170KN/m^2, fcu 30N/mm^2. Assume a unit weight of concrete to be 24KN/m^3 and footing weight 150KN
8. A rectangular footing 2.5m wide along the x-axis and 3m long parallel to the y-axis supports a concentrically located column 0.6m x 0.6m in area. Given: Footing ultimate loads Axial load, Pu = 1540kN Moment about the y-axis, My = 190kN∙m Effective depth of footing = 350mm Concrete f’c = 21MPa Steel, Fy = 275MPaa. Find the maximum punching shear stress (MPa) due to the axial load only. b. What is maximum wide beam shear stress (MPa) due to the given footing loads? c. How much additional moment (kN∙m) can the footing carry without causing uplift of the footing?
Q4: Use the rectangular loaded area to calculate the increase in vertical stresses at points (A) and (B) due to the loaded area of footing. Choose figure (1) or (2). Top view Top view it. awT CLAY 1 CLAY 1 CLAY 2 10m x 10m 150² INCOMPRESSIBLE Figure (1) B G.W.T ME CLAY 1 CLAY 1 CLAY 2 YA 10mX10m 7-15076 INCOMPRESSIBLE Figure (2)
Q2/ Design the footing shown the figure below, using fc = 24 Mpa and fy = 415 Mpa N M M=800 KN-m DL= 800 KN LL=800 KN w=0.5 m 2.25 m 60 kPa Love (L-w) 2 2.25 m 3 m 239 kPa
Q4: Use the rectangular loaded area to calculate the increase in vertical stresses at points (A) and (B) due to the loaded area of footing. Choose figure (1) or (2). Top view Top view B 10 m X 10 m 9-150 KNM² 10 m X 10 m 9-150 KN ² B wwwwww.atm INCOMPRESSIBLE Figure (2) CLAY 1 CLAY 1 CLAY 2 A 1-2m-² 777777777 INCOMPRESSIBLE Figure (1) WAR B B *20 G.W.T 77777 777 CLAY 1 CLAY 1 CLAY 2 S G.W.T
A 2.5m x 2.5m square footing supports a 250mm x 400mm column. Given data: Thickness of footing = 0.70m Total factored axial load = 1,818 KN Materials: Concrete, f'c = 20.7 MPa Steel bars, fy = 280 MPa (20mm diameter both ways) Clear bar covering = 75 mm Strength reduction factors = 0.75 for shear = 0.90 for bending a. Calculate the actual nominal shear stress in the footing (MPa) at the critical section for beam shear action. b. Calculate the actual ultimate shear stress in the footing (MPa) at the critical section for beam shear action. c. Calculate the actual nominal shear stress in the footing (MPa) at the critical section for punch shear action. d. Calculate the actual nominal shear stress in the footing (MPa) at the critical section for punch shear action. e. Calculate the required number of 20mm bars
A square footing 2.5m x 2.5 m supports a square column 300mm x 300mm at its center. Concrete cover to bar centroid = 100mm. Ultimate load combination is 1.2DL + 1.6L. Column loads aee service conditions: DL= 680 KN LL = 400KN f'c = 20.7 Mpa fy = 275 MPa Calculate the nominal punching-shear stress acting at the critical section of the footing slab if the thickness of the slab is 450 mm.
A square footing 2.5m x 2.5 m supports a square column 300mm x 300mm at its center. Concrete cover to bar centroid = 100mm. Ultimate load combination is 1.2DL + 1.6L. Column loads aee service conditions:DL = 680 kN LL = 400kNf'c = 20.7 Mpa fy = 275 MPa Calculate the nominal punching-shear stress acting at the critical section of the footing slab if the thickness of the slab is 450 mm. (Correct Answer 1.99)
You are to desigh a square footing having properties as given: Dimensions: B-2m a=0.6m b=1m c-0.4m Column toads: My P (kN) (kN- m) Dead Load 230 48 Live Load 120 28 Earthquake 25 220 Load Determine the maximum net soil pressure in kPa..