25 >Three liquid samples of known masses are heated to their boiling points with the use of a heater rated at 475.0 W. Once theboiling points of each sample are reached, the samples are heated for an additional 4.60 min, which results in the vaporization ofsome of each sample. After 4.60 min, the samples are cooled and the masses of the remaining liquids are determined. Theprocess is performed at constant pressure. The results are recorded in the table.LiquidBoiling point ("C)Initial mass (g)Final mass (g)331.00CH, OHC,HCH64.5441.036.1462.0106.3780.1615.5312.51Calculate the molar enthalpy of vaporization, AHo. and the molar entropy of vaporization, ASp, for each sample. Assumethat all of the heat from the heater goes into the sample.kJAHp of CH, OH:molASp of CH, OH:mol-KQuestion Source Atkins 7eChemical Principles PkJAHp of C,H,:molASp of C,H 2:mol-KkJAH of C,H,:molAS of C,Hmol-KBased on the calculated ASn values, arrange the liquid samples in order from most ordered to least ordered.Most orderedLeast orderedAnswer BankCH, OHC,HC,H2Question Source Atkins 7e- Chi

Given, Heater capacity = 475.0 WTime = 4.60 min = 4.60×60 sec=276 secTotal heat required = heat…

Three liquid samples of known masses are heated to their boiling points with the use of a heater rated at 475.0 W. Once the boiling points of each sample are reached, the samples are heated for an additional 4.60 min, which results in the vaporization of some of each sample. After 4.60 min, the samples are cooled and the masses of the remaining liquids are determined. The process is performed at constant pressure. The results are recorded in the table. Liquid Boiling point ("C) Initial mass (g) Final mass (g) 441.0 331.00 CH,OH 64.5 462.0 106.37 36.1 C,H2 CH 80.1 615.5 312.51 Calculate the molar enthalpy of vaporization, AH. and the molar entropy of vaporization, ASp, for each sample. Assume that all of the heat from the heater goes into the sample. kJ

Three liquid samples of known masses are heated to their boiling points with the use of a heater rated at 475.0 W. Once the boiling points of each sample are reached, the samples are heated for an additional 4.60 min, which results in the vaporization of some of each sample. After 4.60 min, the samples are cooled and the masses of the remaining liquids are determined. The process is performed at constant pressure. The results are recorded in the table. Liquid Boiling point ("C) Initial mass (g) Final mass (g) 441.0 331.00 CH,OH 64.5 462.0 106.37 36.1 C,H2 CH 80.1 615.5 312.51 Calculate the molar enthalpy of vaporization, AH. and the molar entropy of vaporization, ASp, for each sample. Assume that all of the heat from the heater goes into the sample. kJ

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

A steady-state process to recover crystalline potassium chromate (K,CrOz) from an aqueous solution of this salt is required. Four thousand kilograms per hour of a solution that is one-third K,CrO, by mass is joined by a recycle stream containing 36.4% K2CrO7, and the combined stream is fed into an evaporator. The concentrated stream leaving the evaporator contains 49.4% K,CrO; this stream is fed into a crystallizer in which it is cooled (causing crystals of K,CrO, to come out of solution) and then filtered. The filter cake consists of K,CrO, crystals and a solution that contains 36.4% K,CrO, by mass; the crystals account for 95% of the total mass of the filter cake. The solution that passes through the filter, also 36.4% K,CrO,, is the recycle stream. 1- Draw the flowchart of the system and put all known information. 2- Calculate the rate of evaporation, the rate of production of crystalline K,CrO7, the feed rates that the evaporator and the crystallizer must be designed to handle, and…
Feed gas containing of 78.5mol % H₂, 21% of N₂ & 0.5% of Ar is mixed with recycle gas and enters a reactor where 15% N₂ is converted to NH3 as per the reaction. Ammonia from the exit of the reactor is completely separated from unconverted gases. To avoid the buildup of inerts, a small fraction (5%) of the unreacted gases purged and the balance recycled. USING ASPEN/HYSYS Draw the process flow sheet Product rate and Purge rate Basis:100mol/hr
For a given reaction C2H6 + Cl2 → C2H5Cl + HCl Assume that the percentage conversion of the limiting reactant is 60% and the feed composition in mole percent is 50% C2H6, 40% Cl2 and 10% N2. (a) What is the mole percent of HCl in the product? (b) What is the mole percent of N2 in the product?
b) A plot of land was explored and found to contain 1,000,000 grams of gold. The average goldconcentration was found to be 0.8 grams per ton. A mine was set up on it and sluice boxes were used as the main gold recovery units and recovered200,000 g of gold from 80% of the ore. The concentration ratio of the sluice boxes was 10,000.The field was mined again. On this occasion bowl concentrators were used. The feed used wasestimated to be 800,000 tons and the concentration ratio of this unit was 20,000. 750,000 grams ofgold was recovered. Calculate the following: i) the Quantity and grade concentrate from the sluice boxes .................. ..................... ii) the quantity and grade of the concentrate from the bowl concentrator plant. .............. iii) the quantity and grade of the material remaining at this location...................................
maining Time: 20 minutes, 37 seconds. uestion Completion Status: > A Moving to another question will save this response. uestion 8 A gas occupies 235 mL at 26°C and a pressure of 724 mm Hg. The temperature decreases to 18°C and the pressure drops to 709 mm Hg. What is the final volume of the gas? O 234 ml O 231 ml O 1386 mL O 428 ml. O 2126 mL A Moving to another question will save this response. MacBook Air DII DD F2 F3 F4 F5 F6 F7 F8 @ 23 $ * 2 3 4 7 8. W R Y S D F G J K C V N M つエ B く○
18. Jet is an undergraduate chemistry student, he’s out in the laboratory trying to determine the volatile organic compounds as well as overall protein content of the leaf and stem of a malunggay (Moringa oleifera). He subjected the leaf and stem in a separate digestion reaction (treatment of sulfuric acid), afterwards he subjected the products to high temperature induction to get a dry ash like substance. Which type/s of chemical analysis did Jet employ to reach his objective?I. Qualitative AnalysisII. Quantitative Analysis III. Instrumental Chemical AnalysisIV. Wet Chemical AnalysisA. II & IV onlyB. I & IV onlyC. I, II & IV onlyD. I, II, III, IV
.edu bryuitra/courses roee_re Question Completion Status: The following process describes the complete combustion reaction of Toluene fuel C7HB (SG 0.866) with air. Liquid fuel (n1) enters the combustion chamber at 200mL/min, where it evaporated into a stream of air (n2) 15% in excess. Complete combustion reaction in which only fraction of the fuel is burned. The combustion products go to a condenser, where the unreacted fuel and water are liquified. The mass flowrate of the fuel in this steam (ma) is 50. The uncondensed gas leaves the condenser at 60 C and 0.5 atm gauge pressure. Calculate the fractional conversion of the fuel Calculate the SCMH of the air entering the combustion chamber Calculate the volumetric flow rate of the gas leaving the condenser (m³/min). a. b. C. ri4 CO2 n3 Fuel ris N2 Fuel ri1 ni4 CO2 nig O2 Combustion nig N2 Condenser air riz Chamber ng O2 ni, H,0 n3 Fuel niz H,0
An extraction experiment was carried out with the soxhlet extraction technique to obtain oil from a plant seed. In the experiment, 10 g of plant seeds were taken and extracted with 150 mL of hexane solvent. The oil-hexane mixture obtained at the end of the extraction will be separated in the rotary evaporator and the mass and percent extraction efficiency of the collected oil will be calculated. The data obtained at the end of the experiment are given in the table below. Accordingly, calculate the amount of oil obtained, the amount of oil obtained per 1 gof plant seed and the percent extraction efficiency by establishing la mass conservation balance around the rotary evaporator. Weighing result (g) The tare of the sampled balloon 35 Initial mass (balloon + solvent + oil) 88.13 Tare the balloon in which the solvent was collected 45 93.47 At the end of the experiment, the balloon + solvent mass in which the solvent is collected
Tooling for a vacuum deposition system is cleaned and reassembled. Unfortunately, a drop of water 0.125 cm3 in volume is left in the bottom of a screw hole. Due to the obstructed path to the pump, a negligible amount of water escapes during the early stages of pumpdown, and the drop becomes a virtual leak at a chamber pressure of 4.3E-06 torr. Find the volume of gas formed by the water at this pressure (assume it stays at room temperature). The density of water is 1g cm-3 and the molecular weight 18 g mole-1. (First, determine the number of moles in the drop of water, and use the ideal gas law to determine the volume)(b) To make this result clearer, what is the added time (in hours) to pump out this chamber due to this droplet if the pump, at that pressure, has a rate of 1480 L/s?
•0= AG° + RT * In (K) %3D • -AG° = RT * In (K) %3D • AG° = -RT * In (K) %3D AG° = -0.616 * In (K)... %3D
Calculate 2NaHCO3 = Na2O + 2CO2 + H20 (Show work please!)Mass of empty evaporating dish: 46.233gMass of evaporating dish + sodium bicarbonate: 48.230gMass of evaporating dish + product after 1st drying: 47.504 gMass of evaporating dish: 46.233gMass of evaporating dish + product after 2nd drying: 47.485 use the data to solve the equation! balance the equation
Parameters Description or value Appearance of aqueous benzoic acid solution Concentration of aqueous benzoic acid solution 0.288 (g benzoic acid/100 mL solution) Volume of aqueous benzoic acid solution (mL) 20 Volume of hexane (mL) Appearance of "dry" hexane layer Weight of evaporating dish (g) Weight of evaporating dish plus residue (g) Weight of residue (g) Weight of benzoic acid in original aqueous solution (g) % Recovery transparent 20 powdery 46.719 46.726