The series circuit shown in the figure contains an ideal battery with a constant terminal voltage 46V, an ideal inductor L =17H, a resistor R =5152 resistor, and a switch S. Initially, the switch is open, and there isno current in the inductor. At time t = 0s, the switch is suddenly closed.What is the current in the circuit at t =1.42s after the switch is closed (inA)?Look at correct answer and show all work You AnsweredCorrect AnswerThe series circuit shown in the figure contains an ideal battery with aconstant terminal voltage 46V, an ideal inductor L=17H, a resistorR = 510 resistor, and a switch S. Initially, the switch is open, and there isno current in the inductor. At time t = 0s, the switch is suddenly closed.What is the current in the circuit at t =1.42s after the switch is closed (inA)?VB0.88SwwwRL0.8892 margin of error +/- 1%

Voltage is Inductance is Resistance is Time is Find:Current in the circuit at time

The series circuit shown in the figure contains an ideal battery with a constant terminal voltage 46V, an ideal inductor L=17H, a resistor R = 510 resistor, and a switch S. Initially, the switch is open, and there is no current in the inductor. At time t = 0s, the switch is suddenly closed. What is the current in the circuit at t =1.42s after the switch is closed (in A)?

The series circuit shown in the figure contains an ideal battery with a constant terminal voltage 46V, an ideal inductor L=17H, a resistor R = 510 resistor, and a switch S. Initially, the switch is open, and there is no current in the inductor. At time t = 0s, the switch is suddenly closed. What is the current in the circuit at t =1.42s after the switch is closed (in A)?

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter14: Inductance

Section: Chapter Questions

Problem 52P: In Figure 14.12, =12V , L = 20 mH, and R=5.0. Determine (a) the time constant of the circuit, (b)...

See similar textbooks

Similar questions

A step-up transformer is designed so that the output of its secondary winding is 2000 V(rms) when the primary winding is connected to a 110-V (rms) line voltage, (a) If there are 100 turns in the primary winding, how many turns are there in the secondary winding? (b) If a resistor connected across the secondary winding draws an rms current of 0.75 A. what is the current in die primary winding?
When a camera uses a flash, a fully charged capacitor discharges through an inductor. In what time must the 0.100-A current through a 2.00-mH inductor be switched on or off to induce a 500-V emf?
At s1iat frequency is the reactance of a 20F capacitor equal to that of a 10-mH inductor?
Do Kirchhoff’s rules apply to circuits that contain inductors and Capacitors?
In Figure 14.12, =12V , L = 20 mH, and R=5.0. Determine (a) the time constant of the circuit, (b) the initial current through the resistor, (C) the final current through the resistor, (d) the current through the resistor when t=2L , and (e) the voltages across the inductor and the resistor when t=2L .
Ri iny R2 An inductor with inductance L 0.2 H and negligible resistance is connected to a battery, a switch S, and two resistors, R, : figure. The battery has emf 80 V and negligible intemal resistance. Sis closed at t = 0. What is the value oft for which iz has one third of the final value that it can obtain after switch S has been closed for a long time? = 15 N and R2 = 10 N as seen in A) 13.51 ms B) 23.65 us C) 121.63 us D) 4.86 ms E) 7.29 ms
A0.2 H inductor and a 146 Ohm resistor are connected to a 12 V battery. After how much time will the current reach 84% of its final value?
A circuit contains a 9 V battery, a 5 MΩ resistor, a 10 H inductor, and a switch. When the switch is closed, what isthe current in the circuit after 1 μsec?
ANSWERS ASK YO max For the circuit shown in the figure below, AV, = 77.0 V, w = 65.0π rad/s, and L = 70.0 mH. Calculate the current in the inductor at t = 13.0 ms. 5.38 X Recall that the potential difference across the inductor is proportional to the rate of change of the current. A AVmax sin wot L eee
A series LR circuit contains an emf source of 14 V having no internal resistance, a resistor, a 34H inductor having no appreciable resistance, and a switch. If the emf across the inductor is 80% of its maximum value after 4.0s after the switch is closed, calculate the resistance of the resistor.
A series RL circuit has a 1 k ohm resistor and a 5 mH inductor. What is the time constant for the circuit?
A 22-mH inductor, an 7.9- resistor, and a 5.6-V battery are connected in series as in the figure below. The switch is closed at t = 0. S E + R www ele (a) Find the voltage drop across the resistor at t = 0. v (b) Find the voltage drop across the resistor after one time constant has passed. V (c) Find the voltage drop across the inductor at t = 0. (d) Find the voltage drop across the inductor after one time constant has elapsed. v