Please help 5.4 The following particulars apply to a two-row velocity compounded impulse stage of a turbine: nozzleangle 17°; blade speed 125 m/s; exit angles of the first row moving blades, the fixed blades, and thesccond row moving blades, 22, 26, and 30° respectively. Take the blade velocity cocfficient for cach rowof blndes as 0.9, and assume that the absolute velocity of the steam Ieaving the stage is in the axialdircction. Draw the velocity diagram for the stage and oblain:(i) the absolute velocity of the steam leaving the stage;(ii) the dingram efficiency.(72.2 m/s; 80%)

Answered: Image /qna-images/answer/cce5d00c-1775-41ee-9157-16576d50e299.jpg

The following particulars apply to a two-row velocity compounded impulse stage of a turbine: nozzle angle 17°; blade speed 125 m/s; exit angles of the first row moving blades, the fixed blades, and the second row moving blades, 22, 26, and 30° respectively. Take the blade velocity coefficient for cach row of blades as 0.9, and assume that the absolute velocity of the steam leaving the stage is in the axial dircction. Draw the velocity diagram for the stage and oblain: (i) the absolute velocity of the steam Icaving the stage; (ii) the dingram efficiency.

The following particulars apply to a two-row velocity compounded impulse stage of a turbine: nozzle angle 17°; blade speed 125 m/s; exit angles of the first row moving blades, the fixed blades, and the second row moving blades, 22, 26, and 30° respectively. Take the blade velocity coefficient for cach row of blades as 0.9, and assume that the absolute velocity of the steam leaving the stage is in the axial dircction. Draw the velocity diagram for the stage and oblain: (i) the absolute velocity of the steam Icaving the stage; (ii) the dingram efficiency.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

6.9 One stage of an impulse turbine consists of a converging nozzle and one ring of moving blades. The nozzle angles are 22° and the blade angles are 35°. The velocity of steam at the exit from the nozzle is 650 m/s. If the relative velocity of steam to the blades is reduced by 14% in passing through the blade ring, find the diagram efficiency and the end thrust on the shaft when the blade ring develops 1650 kW. (79.2%, 449 N)
For two row velocity compounded simple impulse turbine wheel derive the expressions for Diagram Power and Diagram Efficiency and also prove that : i. (P )max = 8 Cb? ii. ( na )max = Cos'ai
Uz な、以う0 Vrz VF = Vz Ure Maxe Dr. Ayser Muneer Turbomachines Example (5-2) An inward flow reaction turbine is supplied with water at a rate of (600 Vsec) with a 3 velocity of flow of (2 m/sec). the velocity of periphery and velocity of whirl at inlet are 24 m/sec and 18 m/sec respectively. Assuming radial discharge at outlet and the velocity of flow to be constant, find; 1- Vane angle at inlet, and 2- Head of water on the wheel. V Solution Vn Q = 0.6 m/sec, Vn=2m/sec, uj=24 m/sec, Vu=18m/sec, V1=Vr2 m/sec
The absolute steam entry velocity of a single-stage impulse turbine is 600 m/s, nozzle angle is 20°, ratio of blade speed to whirl component of steam speed is 0·5, blade velocity coefficient is 0·85. Find- (a) the blade angles at inlet and outlet if the steam enters without shock and leaves the blade in an axial direction, (b) power developed if the steam flow rate is 5 kg/sec, (c) blade or diagram efficiency and (d) axial thrust.
6.9 One stage of an impulse turbine consists of a converging nozzle and one ring of moving blades. The nozzle angles are 22° and the blade angles are 35°. The velocity of steam at the exit from the nozzle is 650 m/s. If the relative velocity of steam to the blades is reduced by 14% in passing through the blade ring, find the diagram efficiency and the end thrust on the shaft when the blade ring develops 1650kW.
2. A centrifugal pump consists out of an impeller, diffuser and casing and is powered by 300 kW (shaft power) and rotates at 96.3 rad/s. The flow rate generated by the machine is54.7 Kilo-litres/min. The impeller blade inlet angle and width is 23° and 180 mmrespectively. The blades occupy 12% of the impeller area and the water is assumed toenter the impeller radially. Suction and delivery pipes are equal in size. Determine:2.1. The impeller inlet (i) diameter and inlet blade velocity. (Hint - Substitution: Vfi in terms of Di and Ui in terms of Di both sub into Tan of Blade inlet angle, only unknown is then solving for Di2) 2.2 If the pump has a mechanical efficiency of 80%, calculate the blade velocity at outlet (Uo) and outlet whirl velocity Vwo. Assume the blade exit angle equal to the guide vane angle. (Hint - Substitution: Write Vwo in terms of Uo sub in Euler equation only unknown then is solve for Vwo 2.3 Impeller outer diameter. 2.4 If the flow through velocity is consistent…
Q.2. A catrifugal pump is operating at the rotation rate of 750 rpm. Water leaves the blade at 40° from the radial direction. Water enters to blade at 80° from tangential direction( off design condition). The inner and outher respectivelly. The width of the impeller is 14 cm. Flow rate of the pump is 0.60 m³/s. a) Draw the velocity triangles at inlet and outlet of the blade. Determine; b) the blade angles, Bi and B2. c)Net head and power of the pump, d) Specific speed of the pump, choose the type of the pump ( radial-mixing and axial flow types) radius of the impeller is 12 cm and 18 cm 1
‘The following particulars refer to a two-row velocity-compounded impulse wheel which forms the frst stage of a combination turbine: Steam velocity at nozzle outlet :630 mis Mean blade velocity 125 mls Nozzle angle :16° Outlet angle, first row of moving blades 18 Outlet angle, fixed guide blades 1220 Outlet angle, second row of moving blades :36° Steam flow rate 26kgs ‘The ratio of the relative velocity at outlet to that at inlet is 0.84 for all the blade. Determine ) The velocity of whirl.
‘The following particulars refer to a two-row velocity-compounded impulse wheel which forms the frst stage of a combination turbine: Steam velocity at nozzle outlet :630 mis Mean blade velocity 125 mls Nozzle angle :16° Outlet angle, first row of moving blades 18 Outlet angle, fixed guide blades 1220 Outlet angle, second row of moving blades :36° Steam flow rate 26kgs ‘The ratio of the relative velocity at outlet to that at inlet is 0.84 for all the blade. Determine ) The velocity of whirl. (b) The tangential thrust on the blades.
‘The following particulars refer to a two-row velocity-compounded impulse wheel which forms the frst stage of a combination turbine: Steam velocity at nozzle outlet :630 mis Mean blade velocity 125 mls Nozzle angle :16° Outlet angle, first row of moving blades 18 Outlet angle, fixed guide blades 1220 Outlet angle, second row of moving blades :36° Steam flow rate 26kgs ‘The ratio of the relative velocity at outlet to that at inlet is 0.84 for all the blade. Determine ) The velocity of whirl. () The tangentia thrust on the blades () The axial thrust on the blades. (@) The power developed. (e) The blading efficiency.
Problem (5.2) An impulse turbine has a number of pressure stages (pressure compounded turbine). The nozzle angle in the first stage is 20° and the blade exit angle =30°. The blade speed =120 m/s and the velocity of steam leaving nozzle =300 m/s. If the blade velocity coefficient =0.8 and the nozzle efficiency =0.85, find the work done per kg steam and the stage efficiency. If the steam supplied to the first stage is at 2 MPa and 250°C and the condenser pressure =0.01 MPa estimate the number of stages required. Ans. [36 kJ/kg, 68 %, x 4 ]
3.9 A Kaplan turbine produces 16000 kW under a head of 20 m, while running at 166 rpm. The diameter of the runner is 4.2 m while the hub diameter is 2 m, the discharge being 120 m/s. Calculate (1) the turbine efficiency, (2) specific speed, (3) the speed ratio based on the tip diameter of the blade, and (4) the flow ratio. (78%, 497, 1.84, 0.48)