Sample Problem 5/1 A flywheel rotating freely at 1800 rev/min clockwise is subjected to a variable counterclockwise torque which is first applied at time t = 0. The torque produces a counterclockwise angular acceleration a = 4t rad/s2, where t is the time in seconds during which the torque is applied. Determine (a) the time required for the flywheel to reduce its clockwise angular speed to 900 rev/min, (b) the time required for the flywheel to reverse its direction of rotation, and (c) the total number of revolutions, clockwise plus counterclockwise, turned by the flywheel during the first 14 seconds of torque application. CW Solution

Sample Problem 5/1 A flywheel rotating freely at 1800 rev/min clockwise is subjected to a variable counterclockwise torque which is first applied at time t = 0. The torque produces a counterclockwise angular acceleration a = 4t rad/s2, where t is the time in seconds during which the torque is applied. Determine (a) the time required for the flywheel to reduce its clockwise angular speed to 900 rev/min, (b) the time required for the flywheel to reverse its direction of rotation, and (c) the total number of revolutions, clockwise plus counterclockwise, turned by the flywheel during the first 14 seconds of torque application. CW Solution

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure below depicts the linkages of a pump mechanism. If Q2A is rotating at 10 rpm in a clockwise direction, determine the linear velocity of slider D when Q2A has moved 60 degrees from its original position. Use R&C method. (Ks: 1 in. = 1 in.; Ky: 6 fpm = 1 in.) LINEAR VELOCITY OF B = EPM LINEAR VELOCITY OF C = FPM LINEAR VELOCITY OF D = FPM
Problem 2 For the mechanism shown if link AO1 = BC = 50 mm, AC = 200 mm, BO5 = 100 mm, and link A01 rotates at 200 rpm counterclockwise, 1- Draw velocity and acceleration polygon. 2- Velocity and acceleration for piston C. 3- Angular acceleration for link BO5. 05 01 03
Crack AB of a slider crack mechanism shown in Figure 2 rotate at a constant of 300 rpm in clockwise direction. The connecting rod BC has a length of 1 m and incline at 45 degrees to vertically positioned piston C. 3.1. Draw the displacement diagram of the mechanism shown in Figure 2 to scale. 3.2. Use a vector diagram to determine the velocity of the piston C and connecting rod BC. 3.3. Calculate the acceleration of piston C and the angular acceleration ofconnecting rod BC.
Problem 7 (Use relative motion analysis): The four-bar linkage is a famous one! If the angular velocity and angular acceleration of the drive link OA are 10 rad/s and 5 rad/s², find the angular acceleration of bar AB at this position. Ans: %AB = -15.99 rad/s² B 200 mm CO 15⁰ 240 mm @0, %0 0 A 80 mm 60°
Problem 2 Mechanism Another of the doohickeys analyzed by the Enthusiast Club is the crank-slider shown. The crank is turning at a constant WAB= 20 rpm counterclockwise. The dimensions are LAB = 200 mm LBD = 150 mm and LBC = 230 mm. D Using the methods shown in class that require diagrams, determine the acceleration of points A and D, providing magnitude and direction. LAB B LBD WAB LBC
The dimensions of the various links of a mechanism, as shown in Fig. 3, are as follows: OA = 0.3 m: AB = 1 m: CD = 0.8 m; and AC = CB. If the crank OA rotates at 100 rpm. in the anticlockwise direction, find, for the given configuration: 1. velocity and acceleration of B and D: 2. angular acceleration of the links AB and CD. 45 0.6 m- Eig 3
For the problem related to Fundamental.4, a sketch of the considered system showing and naming (or numbering) every part of the system considered, the respective velocity and acceleration of each, and the frame of reference considered is mandatory. Its absence will automatically make the problem false. Gear A on the drive shaft of the outboard motor has a radius rÃ=8 in. and the meshed pinion gear B on the propeller shaft has a radius r=50 in. The point P is located on the propeller's tip at a distance 10 in. from the neutral axis of the propeller's shaft. B At the beginning of the propulsion, the drive shaft rotates with an angular acceleration a = what must be the value of A to have, while starting from rest, vp=28 in.s¹ in 8 seconds ? A. t2.3 rad.s2 where t is in seconds.
Problem 5 A motor car is uniformly accelerated from 36 kmph to 45 kmph over a distance of 300 m. If the wheels are 1 m diameter, find the angular acceleration of the wheels.
For the problem related to Fundamental.4, a sketch of the considered system showing and naming (or numbering) every part of the system considered, the respective velocity and acceleration of each, and the frame of reference considered is mandatory. Its absence will automatically make the problem false. Gear A on the drive shaft of the outboard motor has a radius rA=3 in. and the meshed pinion gear B on the propeller shaft has a radius rB=64 in. The point P is located on the propeller's tip at a distance 7 in. from the neutral axis of the propeller's shaft. P B At the beginning of the propulsion, the drive shaft rotates with an angular acceleration a = A. t2.2 rad.s2 where t is in seconds. what must be the value of A to have, while starting from rest, vp=21 in.s1 in 5 seconds ?
Find the velocity of the slider D and the angular velocity of link CD for the engine mechanism shown in Fig. The crank 01A rotates at a uniform speed of 20 rad/sec in the clock wise direction. The various lengths of the given mechanism are. O1A =0.5 m, AB =1.0m, 02B =0.75m, BC =lm and CD =1.75m.
Solve it using complex algebra; otherwise, do not solve it. Calculate the rotational speed. theta 3' prime, and acceleration, theta 3" double prime for the mechanism in Fie 3 if theta3-50. roa=5cm and Rab= 15cm. using complex algebra method Subject: Theory of machine and mechanism
Link 2 of the mechanism shown rotates about the z-axis w.r.t. the ground (Link 1) at a constant +2rad/s. Link 3 rotates about a pin joint currently aligned with the y-axis at a constant -3rad/s. What is the angular acceleration of the link? Angular acceleration (rad/s^2): type your answer.... i+ type your answer... j+ type your answer.... k. Answer with integers (include zeros). Include a minus sign if necessary. Don't include a plus sign. Z 2 3