Refrigerant-134a enters an adiabatic compressor as saturated vapor at 100 kPa with a rate of 18 m³/hr, and exits at 1000 kPa, 70 °C. 1000 kPa 70°C. Adia. Compressor R-134a Sat. Vap loo kP 18 m²/hr. Below 65 % Between 65% and 70% Between 70% and 75% Between 75% and 80% O Above 80% 2) The mass flow rate of the refrigerant :in (kg/s) is Below 0.01 O Between 0.01 and 0.02 Between 0.02 and 0.03 Between 0.03 and 0.04 Above 0.04 O *: The power input in (kW) is Below 0.5 O Between 0.5 and 1 Between 1 and 1.5 Between 1.5 and 2 Above 2

Refrigerant-134a enters an adiabatic compressor as saturated vapor at 100 kPa with a rate of 18 m³/hr, and exits at 1000 kPa, 70 °C. 1000 kPa 70°C. Adia. Compressor R-134a Sat. Vap loo kP 18 m²/hr. Below 65 % Between 65% and 70% Between 70% and 75% Between 75% and 80% O Above 80% 2) The mass flow rate of the refrigerant :in (kg/s) is Below 0.01 O Between 0.01 and 0.02 Between 0.02 and 0.03 Between 0.03 and 0.04 Above 0.04 O *: The power input in (kW) is Below 0.5 O Between 0.5 and 1 Between 1 and 1.5 Between 1.5 and 2 Above 2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

water at 40 ° C is converted into superheated steam at 250 ° C at 150 kPa. Specify: a. Initial enthalpy of water (Singh's Book Tab A 4.2) = AnswerkJ / kg. b. Enthalpy at saturated vapor pressure = AnswerkJ / kg. c. Superheated vapor enthalpy (Tab A Singh's Book 4.3) = AnswerkJ / kg. d. Total enthalpy change = AnswerkJ / kg.
3. The point that connects the saturated liquid line to the saturated vapor line is called the: (A) triple point (B) critical point (C) superheated point (D) compressed liquid point.
a) A freely-moving piston-cylinder device contains 0.4 m³ or air at 300 kPa and 57 °C at its initial state. A paddle wheel placed within the confined space is turned on and dissipates a heat of 100 kJ to the air. During the operation, 10 kJ of heat is lost to the surrounding area. Applying constant specific heats of air at room temperature (cp= 1.005 kJ/kg . K; C, = 0.718 kJ/kg. K; k = 1.4, R = 0.287 kJ/kg. K)., compute: The final temperature of the piston cylinder device 1) 11) The final volume of the piston-cylinder device 111) The boundary work done by the piston-cylinder device Present the process on a P-v diagram iv)
2) Argon (ideal gas, Cp=0.5203 kJ/kg.K) at 27 ºC, 85 kPa, and 215 m/s enters a diffuser at a rate of 2 kg/s and leaves at 50 ºC. The exit area of the diffuser is 500 cm2. The gas is estimated to lose heat at a rate of 20 kJ/s during this process. Required: Draw a standard and clear schematic of the problem and label the performance of the schematic. Perform step by step energy and mass analyses, state your assumptions and determine the following:a) The exit velocityb) The inlet areac) The inlet pressure of the Argon
At the start of the compression process in the reciprocating compressor of refrigeration plant the refrigerant is at 1.5 bar, dry saturated. At the end of the compression process, which is according to a reversible polytropic law pv-C., The pressure is 6.5 bar. Using the properties of refrigerant given as table, interpolating where necessary, calculate. • The change of specific entropy during the • The degree of superheat of refrigerant after compression. process.
Q NO1: A mixture (i.e., thermodynamic system) of 0.182 kg of helium (He) and 0.091 kg ofoxygen (O2) is compressed polytropically (PVn = const.) in a piston-cylinder devicefrom 101.352 kPa and 15.56C to 413.69 kPa according to n = 1.4. Determine for theprocess: (a) the final temperature, (b) the work done, and (c) the heat energy.Clearly mention whether the work is done on or by the mixture, and whether the heatis supplied to or rejected by the mixture to the surroundings.Take the specific heat capacity at constant volume, cv for He = 3.119 kJ/(kg·K) andfor O2 = 0.659 kJ/(kg·K), and the value of gas constant R for He = 2.0769 kJ/(kg·K)and for O2 = 0.2598 kJ/(kg·K).Draw the schematic of piston-cylinder device and display the process on a hypothetical indicator diagram for the process.
Q1// Define the following Dryness fraction, Latent heat of evaporation, Super-heated vapour Q2// Determine the enthalpy, the entropy, internal energy and specific volume of steam Vapor at 1100 kPa and x-10% Q3// Determine the enthalpy of steam for: a- Saturated vapor at 200°C b- Superheated at 1 MPa and 400°C c- Saturated liquid at 375 kPa
Hot water at 400kPa, 150 deg Celsius is fed to a throttle at a rate of 1.5kg/s and exits at 200kPa. After leaving the throttle, the resulting mixture enters a chamber where the vapor leaves from the top at 200kPa and the liquid leaves from the bottom at 200kPa. What is the mass flow rate of each of the two exit flows?
a) In an air conditioning system, 30 m/min of outside air at 30 C is mixed with 300m /min return air at 25°C adiabatically. The mixing process occurs at constant pressure and constant air density. Kinetic and potential energy effects can be neglected. Determine the temperature of the mixed air, C.
An ideal gas initially at one atmosphere is ___ (?) reversibly to two atmosphere while in thermal contact with the surroundings. Calculate the heat Q, Qsurr, delta S and delta S univ for the process.
a. Specific volume of superheated steam at 10kPa and 150°cb. Internal energy of superheated steam at 20kPa and 110°Cc. Entropy of superheated steam at 101.325kPa and 200°Cd. Enthalpy of saturated liquid water 298.15 Ke. Enthalpy of evaporation of water at 220°C and 2319.8 kPa
An ideal gas at 15 lbf/in2, 77°F flows horizontally at 516 ft/s into an adiabatic diffuser. It exits at 28 ft/s. Assume the heat capacity of the gas is constant.a. Determine the change in specific enthalpy (in Btu/lbm) and the outlet temperature if the gas is He.b. Repeat for R-125.c. Repeat for ozone (O3), which has a Molecular Mass of 47.9982 and a Cv0 of 0.1538 Btu/(lbm∙°R).