Q1/ A beam of uniform section with rigidly fixed ends which are at the same level has an effective span of 10 m. It carries loads of 30 kN and 50 kN at 3 m and 6 m respectively from the left-hand end. Find the vertical reactions and the fixing moments at each end of the beam. Determine the bending moments at the two points of loading.

Q1/ A beam of uniform section with rigidly fixed ends which are at the same level has an effective span of 10 m. It carries loads of 30 kN and 50 kN at 3 m and 6 m respectively from the left-hand end. Find the vertical reactions and the fixing moments at each end of the beam. Determine the bending moments at the two points of loading.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.5.11P: The horizontal beam ABC of an oil-well pump has the cross section shown in the figure. If the...

See similar textbooks

Similar questions

A beam with length L is fixed at both ends. It is loaded with a concentrated force P at L/3 from the first support. Draw the loading diagram. If the beam is made of steel, what is its elastic modulus?
Find the support reactions, draw the free-body diagram of the beams that shows the reactions and the equivalent loadings of the beams. Show the computation where M1 = 125 lb-ft, M2 = 600 lb-ft, L = 18 ft, wo = 1000 lb/ft
Determine the reactions and draw the shear and bending moment diagrams for the beams shown by using method of consistent deformations. Select the reaction moment at the fixed support to be redundant.
5. For the beam loaded as shown, calculate the internal axial force, shear force, and bending moment on the cross section through points C and D. Assume the reactions at the supports A and B are vertical. Answer: Vp = 1.875 kN, Mp = 3.94 kNm 6 kN 3 kN/m 1.5 m 1.5 m- 0.5 m 0.5 m
A car parking roof with cantilever beam of length 6 m carrying point loads of 12 kN and8 kN at 1.5 m and 2.5 m respectively from the free end and the point loads of 6 kN,3 kNand 4 kN acts at 1.5 m, 2.5 m and 6m from the fixed end. Construct the shear force andbending moment diagram for the beam and also identify the point at which the maximumshear force and bending moment is acting on the beam.
Find an expression for the moments at the fixed supports for the beam shown
Q14 Find the load .if the load distance 3m and effort distance 10m and effort3D300N Effort Pivot Load
The overhanging beam ABC of span 5.4 m is constructed of a W360 X 216 rolled-aluminium shape. It carries uniformly distributed load, ω of 35 kN/m and point loads of P1 = 30 kN and P2 = 25 kN. i) Draw the shear force and bending-moment diagrams for the beam.
A box is produced by joining the wooden and plywood rectangular elements with screws as shown in the section. The shear force that each screw used in the cross section joint can safely carry is V = 2 kN. If the beam element created in this way is loaded from the middle of the span with a load of P = 100 kN, find the screw gap a and the total number of screws to be used in the beam element. (Cross-section dimensions t = 15mm, b = 150mm, c = 30mm, h = 180mm; beam support span L = 5m)
de The beam shown supports a load that varies uniformly from 250 N/m at the left end to 0 N/m at the right end. The lengths of the beam segments are d₁=2 m, d₂ = 2 m, and d₂ = 8 m. Reactions Determine the reactions at pin A and roller C. Let positive values indicate upward forces. A= C= Internal Load Determine the internal shear and bending moment at a section passing through point D. Use the standard convention for the meaning of positive shears and bending moments. VD= Mp=
The beam is constructed of four boards, and is subjected to a moment of M=200 kip in, calculate the resultant force on the top board C. -1 in. 1 in. M-200 kip.in 13 in 80 T in. 8 in 1 in.
Draw the free body diagram, shear force diagram, and bending moment diagram for section BC and AB of the beam shown below. Make one set for the horizontal plane and another set for the vertical plane. The values of P1 and P2 are not specifed and can be kept generic.