Q. A.2. A well is 14 m deep with 1 m depth of water at the bottom, i.e. 13 m is the distance from the ground to the water surface. You have a pump, which must be placed either in a well-house at the ground level, or within a dry parallel shaft located on the side of the well. Explain why will it not be possible to mount the pump at the ground level to raise water from the well? What is the minimum depth to which the well shaft must be drilled to allow the pump to raise water to the surface? Assume that the intake pipe accesses the well through the wall of the port-hole and that its inlet is 0.5 m below the surface of the water. Assume atmospheric pressure is 1010 hectopascals.

Q. A.2. A well is 14 m deep with 1 m depth of water at the bottom, i.e. 13 m is the distance from the ground to the water surface. You have a pump, which must be placed either in a well-house at the ground level, or within a dry parallel shaft located on the side of the well. Explain why will it not be possible to mount the pump at the ground level to raise water from the well? What is the minimum depth to which the well shaft must be drilled to allow the pump to raise water to the surface? Assume that the intake pipe accesses the well through the wall of the port-hole and that its inlet is 0.5 m below the surface of the water. Assume atmospheric pressure is 1010 hectopascals.

Name: Q. A.2. A well is 14 m deep with 1 m depth of water at the bottom, i.
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Q. A.2. A well is 14 m deep with 1 m depth of water at the bottom, i.e. 13 m is thedistance from the ground to the water surface. You have a pump, which must beplaced either in a well-house at the ground level, or within a dry parallel shaft located

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The rectangular tank shown here, with its top at ground level is used to catch runoff water. Assume that the water weighs 62.5 lb/ft³. a. How much work does it take to empty the tank by pumping the water back to ground level once the tank is full? b. If the water is pumped to ground level with a (5/11)-horsepower (hp) motor (work output 250 ft-lb/sec), how long will it take to empty the tank (to the nearest minute)? a. How much work does it take to empty the tank? ft-lb b. How long will it take to empty the tank (to the nearest minute)? minutes (Round to the nearest minute as needed.) 7 ft level of Ground 14 ft
4. A conical tank is 12 ft across the top and 8 ft deep. It con- tains water to a depth of 6ft. Find the work done in pumping the water to a point 2 ft above the top of the tank.
For this system and Ywater = 62.4 lb/ft³, what is the (a) total horsepower required by the pump? and (b) the power transferred to the water (water horsepower)?
A horizontal cylindrical tank 4ft in the diameter and 10ft long is full of water. Find the work done in pumping the water to a point 4ft above the top of the tank tavit Type here to sear
3. How much work would it take to pump oil of weight density 35 lb/ft3 out of a spherical tank of radius 5 ft with a pump placed 2 ft above the top of the tank?
A centrifugal pump delivers 60 litres of water per second to a tank situated at a height of 20 metres. If the overall efficieney of the pump is 70%, find the power required for the pump. (Ans. 16-8 kW) 1.
A tank, shaped like a cone has height 8 meters and base radius 3 meters long. It is placed so that the circular part is upward. It is full of water, and we have to pump it all out by a pipe that is always leveled at the surface of the water. Assume that a cubic meter of water weighs 10000 N, i.e. the density of water is 10000 N/m3. How much work does it require to pump all water out of the tank? Enter the exact value of your answer.
An open tank has the shape of a right circular cone (see figure). The tank is 8 feet across the top and 6 feet high. Water is pumped in through the bottom of the tank. (The water weighs 62.4 lb per cubic foot.) Ay (a) How much work is done to fill the tank to a depth of 2 feet? ft-lb (b) How much work is done to fill the tank from a depth of 1 feet to a depth of 6 feet? ft-lb
Include a free body diagram A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipe is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometer, relative to a datum, through the pump. A. 12.74 m B. -4.67 m C. 2.56 D. -2.72 m
Example 2.8. The inlet to pump is 10.5 m above the bottom of sump from which it draws water through a suction pipe. If the pressure at the pump inlet is not to fall below 28 kN/m absolute, work out the minimum depth of water in the tank. Assume atmospheric pressure as 100 kPa.
Q.1- The water level, h (t), is controlled by an open -loop system as shown in figure below. A dc motor controlled by an armature current i turns a shaft , opening a valve. The inductance of dc motor is negligible that is, L = 0.Also the rotation friction of the motor shaft and valve is negligible .That is,C=0,The height of the water in the tank is h(t) = [(1.60(1) -h(t)) dt. The motor constant is K=10, the inertia of the motor shaft and valve is J=6x10³ Kg.m² and back e.m.f constant K, = 0.0706V/(rad/s). Determine i-The deferential equation for h(t) and V(t). ii-The transfer function H(s)/V(s). Amplifier 10:41 4.-50 07 Valve MD) 41)
B1.A hydraulic pump delivers 12.5 litres per minute towards pressure of 225 bar Find the following (a) Calculate the hydraulic power in kW (b) If the overall efficiency of the pump is given as 67% .Find the input of electric power needed tỏ drive the pump in watts