Professional photographers most commonly use digital photography now. However, some photographers still prefer the quality of the image and the developing process of black and white film compared to digital images. A photographic stop bath is a chemical bath used in processing black and white film. When developing black and white film, a basic developing solution is used to have the pictures develop from the film. The stop bath solution is a dilute 1 to 2% acetic acid solution, and it is applied to the film to stop immediately the development of the film. If the electrical conductivity of the stop bath solution was tested, what degree of electrical conductivity would be expected? Explain MAMUT
Q: Complete the balanced chemical equation for the following reaction between a weak base and a strong…
A: To complete the balanced chemical equation for the following reaction between a weak base and a…
Q: A galvanic cell consists of a Ni/Ni²+ half-cell and a Co/Co²+ half-cell with initial concentrations:…
A: Given-> E°Ni2+/Ni = -0.25 V E°Co2+/Co = -0.28 V
Q: Electroplating is a way to coat a complex metal object with a very thin (and hence inexpensive)…
A: Electroplating is a process of coating layer of metal over another metal by the process of…
Q: Graphite furnace atomizers are renowned in Atomic Absorption Spectrometry for their exceptionally…
A: Atomic Absorption Spectrometry : It is a spectroanalytical technique to quantitatively determine…
Q: Oxytocin is a naturally occurring hormone that induces labor and stimulates milk production in…
A: The organic compound is formed by two main elements, carbon, and hydrogen. The specific group of…
Q: What is the conjugated base of this equation?
A:
Q: Carbon dioxide gas can be pumped into coal seams underground to release trapped methane gas.…
A:
Q: 1. 2. Classify the substance as a weak acid, weak base, strong acid, or strong base Based on your…
A: Hydrofluoric acid, HF it's name itself tells that this is an acid.
Q: Question 4 When hydrogen reacts with calcium metal, what are the oxidation numbers of the calcium…
A:
Q: Benzene was reacted with chloroethane in the presence of a Lewis acid catalyst to form Compound A.…
A: Formation of (A) Benzene react with alkane in the presence of lewis acid to form alkyl benzene .…
Q: d. MO انہیں HBr, H2O
A: Here we have to write the major product formed and mechanism of reactions.
Q: Directions: Enlist uses of polymers. Write your answer on a separate sheet of paper. 1. 2. 3. 34567…
A: Any substance made up of large marcromolecules which are the repetitive arrangement of similar…
Q: What's More (PORTFOLIO OUTPUT #52) Directions: Cite the use of the given polymers. Write your answer…
A:
Q: How much heat energy is required to boil 55.2 g of ammonia, NH3? The molar heat of vaporization of…
A:
Q: Describe the relative position of the equilibrium if Keq = 1.76 x 10-5
A: Let the equilibrium reaction be A + B ------> C + D Then, the expression of Keq is as follows:…
Q: 5. Given the molecule 1,2-dimethyl-4-bromocyclohexane below: CH3 Br" CH3 NOTE: All groups are cis…
A: see below
Q: For the reaction 2 A + 3 B → 4 D + 5 E, how is the rate of reaction expressed in terms of rate of…
A: Given reaction, 2 A + 3 B → 4 D + 5 E rate of reaction expressed in terms of rate of disappearance…
Q: How much energy (kJ) is needed to heat 25.0 g of isopropyl alcohol from -25.0°C to +90.0°C? Molar…
A: we have to calculate the energy needed to heat isopropyl alcohol
Q: Assign E or Z configurations to each alkene below. H₂C CH3 Br CH₂CH3
A: The E/Z system analyzes the two substituents attached to each carbon in the double bond and assigns…
Q: Choose the correct structure for the aldol condensation product of the reaction below: O O OH, H₂O…
A:
Q: I. Assign oxidation state to the underlined element. 1) Cl₂ 2) SO₂ 3) K₂02
A: Oxidation number: • Oxidation number of atoms in pure element or Atoms in free or uncombined…
Q: 1. 3. 4. 5. 1. 3. 4. 5. 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. CARBOHYDRATES LIPIDS PROTEIN NUCLEIC ACID
A: Carbohydrate,lipid,protein and nucleic acid are the biomolecules responsible for for the various…
Q: Since hard-shelled organisms evolved about 550 million years ago, billions of tons oflimestone rock…
A: The amount of carbon dioxide in the atmosphere has increased as a result of the massive amount of…
Q: Activity type of Alumina (meaning of type I, II, III, etc.) what do the numbers mean?
A: Alumina is a granular and extremely porous form of aluminum oxide. It is available in basic, acidic…
Q: 2. Based on your classification, predict the approximate pH of a solution containing the substance.…
A: HF is a acid.
Q: Combustion of Ethane 2 C2 H6(g) + 7 O2(g) ----> 4 CO2(g) + 6 H2O (g) 1.The reaction represented by…
A:
Q: 11) Dissociation of a complex ion Find the equilibrium concentration of silver ions in solution…
A:
Q: Give the major force between acetone and chloroform. dipole-dipole dispersion…
A:
Q: What product is formed when the compound below is treated with sodium hydride followed by…
A: When 2-butanol is treated with sodium hydride then due to removal of Hydrogen, sodium isobutoxide is…
Q: Using standard reduction potentials from the ALEKS Data tab, calculate the standard reaction free…
A: Given redox reaction : Zn (s) + 2HNO₂ (aq) + 2H+ (aq) → Zn2+ (aq) + 2NO (g) +2H₂O (l)
Q: II. Identify oxidizing agent and reducing agent in the reactions... 1. 2Na2S2O3 + 12 →→ Na2S4O6 +…
A: Identify oxidizing agent and reducing agent in the reactions--
Q: Select the best reagent or sequence of reagents from the list provided which would best accomplish…
A:
Q: /Explain how the two vitamins below reacts with water.Ensure you use the following polar,non-polar…
A: The polarity of molecule decide its solubility more polar molecules are more soluble in water .
Q: Q3. Draw Lewis structure, indicate formal charge on each atom, determine the hybridization of all…
A:
Q: A solution is prepared by dissolving 49.3 g of KBr in enough water to form 473 mL of solution.…
A:
Q: Our atmosphere is made up of 78% N2, 21% O2, and 1% other gases. What is the partial pressure of N2…
A: We use the formula below to find the partial pressure of a gas in a gas mixture. Partial pressure…
Q: 14. Write the equilibrium expression for the following reaction ZnCO3(s) ZnO (s) + CO 2 (g) 15. A…
A: ♦ The equilibrium expression involves the ratio of equilibrium concentration of product to the…
Q: Plz solve only last part (d) within 10 mins I'll upvote your answer AURIG MIG TURUTTing compoun a.…
A: IUPAC is a system of naming organic compounds recommend by International Union of Pure and Applied…
Q: Valence electrons are a. not associated with a particular atom b. in various orbits around the…
A: Valence electrons are ?
Q: 10.2 Palladium-107 undergoes beta (B) decay (t₁/2 = 6.5 x 105 yr). How long will it take for 12% of…
A: Given the half-life of the first-order decay, t1/2 = 6.5*105 yr For the first-order reaction, rate…
Q: Q1:- Calculate the first-order rate constants for the dissociation of the following weak acids:…
A: Given: Acid dissociation constants (K) are 1.75 x 10-5, 1.2 × 10-7, and 5.71 x 10-10 for acetic…
Q: In the molecule shown, the portion highlighted in red is called the ( ) group. o alkoxy O alkyl o…
A: The ester is formed from alcohol and carboxylic acid. The name of an ester is written as an alkyl…
Q: Which of the following would be expected to show resonance? (Select any/all that apply) :00: N 30:
A:
Q: Camels store the fat tristearin, C57H110O6, in their humps. In addition to being a source of energy,…
A:
Q: Please create a concept map about macromolecules.
A:
Q: As expected, there is an increase in entropy for this dissolution process and AS rxn is 43.4 J/K.…
A: Given, Temperature = 25°C=(25+273)K=298 K
Q: Consider the set of compounds below: OH OH (A) (B) (C) Which of the following statements is true…
A: Acids is a proton donor and it can also accept a pair of electron. Base can easily donate a pair of…
Q: Calculateur (298.15 K, 1 bar) for nitrogen in air, assuming that the mole fraction of N₂ in air is…
A:
Q: Determine the freezing point depression of a solution that contains 30.7 g glycerin (C 3H 8O 3,…
A:
Q: 2/what transfers are allowed and prohibited in inorganic vehiches and explain them in detaill.
A: Selection rule govern the transition from one electronic level to other electronic level.
I need help badly please help me and thank you in advance!!
Step by step
Solved in 2 steps
- Because of the risk of lead poisoning, the exposure of children to lead-based paint is a significant public health concern. Thefirst step in the quantitative analysis of lead in dried paint chips is to dissolve the sample. Corl evaluated several dissolution techniques.24 In this study, samples of paint were collected and pulverized with a Pyrex mortar and pestle. Replicate portions of the powdered paint were then taken foranalysis. Results for an unknown paint sample and for a standard reference material, in which dissolution wasaccomplished by a 4–6-h digestion with HNO3 on a hot plate, are shown in the following table. (a) Determine the overall variance, the variance due to the method, and the variance due to sampling. (b) What percentage of the overall variance is due to sampling? (c) How might the variance due to sampling be decreased?You want to make a solution of the primary standard sodium oxalate. It has a molecular mass of 133.999 g/mol (no error). Your analytical balance has an error of 0.2 mg. You add some weighing paper to the balance and it reads a mass of 0.23626 g. You then add sodium oxalate onto the weighing paper until the mass registers as 2.8539 g. You carefully transfer this to a 250.0 ml volumetric flask with an error of 0.1 ml and dissolve the sodium oxalate in a sufficient volume of water. What is the concentration of the oxalic acid (in M) and what is the absolute error (also in M).You are preparing a 100.0 mL standard solution needed for titration analysis. The NaOH (40 g/mol) pellets are measured to be 0.5341 g in a balance with acceptable uncertainty of +0.001 g. Mass of the pellets is recorded after taring the container. The pellets are put in a beaker and added with 50 ml distilled water measured by a graduated cylinder. The solution is then quantitatively transferred to a 100-mL volumetric flask with uncertainty of ±0.08 mL and diluted to a 100-mL mark. What is the concentration (M) of the solution and estimate its uncertainty by propagation? Assumption: There is no uncertainty in molar mass. Express your answer as C+/- u M.
- Procedure: Step 1: Pipet 25 mL of prepared sample solution, which has been prepared into a 250 mL Erlenmeyer flask. Step 2: Add 3-5 drops of phenolphthalein indicator solution to the sample solution in the 250 mL Erlenmeyer flask. Step 3: Rinse the buret with three 10 mL portions of standardized 0.1 M HC1 acid solution, before fill this acid solution into the buret and record the initial volume of this acid solution in the burette. Step 4: Titrate the sample solution with the standardized 0.1 M HC1 to the endpoint and record the final volume of this acid in the burette. (Note: phenolphthalein endpoint is from pink color to colorless) Step 5: Repeat the titration for two more times. Step 6: Repeat the same procedure from step 1 to step 5 by using methyl orange as an indicator rather than phenolphathelein. (Note: methyl orange endpoint is from orange to red color). Calculate the alkalinity of the sample for both the indicators and potentiometric method using the following equation: [Alk]…Ammonium sulfate is added to an unknown mixture of ions. A precipitate forms. The solution is centrifuged, and the remaining solutions is decanted. Ammonium oxalate is then added to the solution and no precipitate forms. Sodium monohydrogen phosphate and sodium hydroxide are added to the decanted solution, and no precipitate forms. Sodium hydroxide is added to a fresh sample of the unknown. A damp piece of litmus paper over the opening of the test tube remains red. Select the ions present. Question 5 options: Ba2+ Ca2+ Mg2+ NH41+A water sample was analyzed for the total hardness through the reaction between the sample and EDTA. The data obtained from the experiment are presented below (MM CaCO3 = 100.0869 g/mol): Table 1. Standrdization of the EDTA solution mass of CaCO3 used 0.4567 g Initial burette reading 8.20 mL Final burette reading 15.65 mL Volume consumed 7.45 mL Table 2. Determination of Hardness of Water Volume of water sample 50.00 mL Initial burette reading 15.65 mL Final burette reading 24.85 mL Volume consumed 9.20 mL O 12,390 ppm O 990 ppm O 11,270 ppm O 10,290 ppm
- Ammonium sulfate is added to an unknown mixture of ions. A precipitate forms. The solution is centrifuged, and the remaining solutions is decanted. Ammonium oxalate is then added to the solution and no precipitate forms. Sodium monohydrogen phosphate and sodium hydroxide are added to the decanted solution, and no precipitate forms. Sodium hydroxide is added to a fresh sample of the unknown. A damp piece of litmus paper over the opening of the test tube turns blue. Select the ions present. Question 4 options: Ba2+ Ca2+ Mg2+ NH41+A water sample was analyzed for iron content using the iron-phenanthroline method. Using the set of data from Question 15 (as presented below), Reagent Blank Absorbance Absorbance (au) Reagent Blank Absorbance 0.003 Concentration of Stock Solution: 10 ppm Volume of Stock Solution (mL) Total Volume of Standard Solution (mL) 0.50 10.00 1.00 10.00 2.00 10.00 3.00 10.00 4.00 10.00 5.00 10.00 Volume of Trial Unknown Solution (mL) 1 5.00 2 5.00 3 5.00 find the true concentration of Fe2+ of the original sample. A) 5.12 ppm B) 2.56 ppm 2.52 ppm D) 5.05 ppm Concentration of Standard Solution (ppm) Total Volume of Unknown Solution (mL) 10.00 10.00 10.00 Absorbance (au) 0.012 0.132 0.267 0.349 0.428 0.560 Absorbance (au) 0.289 0.296 0.2810.3414 grams of sample (crushed aspirin tablet) was weighed and dissolved in 25 mL ethanol. This solution was transferred into a 100 mL volumetric flask and filled to the mark with deionized water. 20 mL of the solution was filtered through a 0.22 μm pore filter and 503 μL of the filtered sample solution was diluted so, that the final volume of the solution was 12 mL. This sample solution and calibration solutions with known concentration of acetyl salicylic acid (ASA) were injected (injection volume 20 μL) into a HPLC and the following peak areas were measured (expressed as averages from three separate chromatographic runs): Solution Cal 1 Cal 2 Cal 3 Cal 4 Cal 5 Sample Structure of ASA: C(ASA) (mg/L) 0 OH B 53.5 105.9 140.9 195.4 247.4 Average weight of the tablet was estimated as 591.9 mg. What is the mass of ASA in one tablet? Please give the answer with 4 significant digits. Be sure you present the result with units! Peak area (mA.s) 4995 9953 12941 17271 22179 10467.3
- A student determined fluoride in a toothpaste sample using ion chromatography. A toothpaste sample of mass 0.100 g was dissolved in type I water and then quantitatively filtered through a Whatman #1 filter paper into a clean 100 ml volumetric flask. The flask was then made up to volume with type I water and mixed thoroughly.A portion of the solution was filtered through a 0.45 um filter into a sample vial for analysis. Analysis of the sample gave a fluoride concentration of 1.60 mg/l Calculate the % w/w fluoride in the original toothpaste sample. (Give your answer to 3 decimal places please)ASSAY Calibration solutions Calibration solutions of naproxen in the range 5 – 25 μg/mL were prepared. Sample preparation 20 tablets weighing 12.3819 g were crushed to a fine powder. A portion of the powder (145.4 mg) was shaken with approximately 150 mL of acetic acid (0.05 M) for 5 min and then made up to volume in a 250 mL volumetric flask (stock solution). Approximately 50 mL of the stock solution was filtered and a 25 mL aliquot was diluted to 100 mL in a volumetric flask. 10 mL of the resulting solution was further diluted to 100 mL with acetic acid (0.05 M). Analysis The standards and sample solutions were analyzed by HPLC under the following conditions: Column: octadecylsilyl (ODS), 4.6 mmx150 mm, mobile phase: acetonitrile : 0.05 M acetic acid (85:15), flow rate: 1 ml/min, UV detection at 243 nm. Results: A calibration curve of concentration versus peak area was constructed for the standard solutions and gave the straight-line equation: y = 3555.6x + 85, r = 0.9999 The area…Six clean, dry, 18 x 150mm test tubes 1-6 was labeled. 5.00 L of 2.00 x 10-3 M Fe(NO3)3 solution was pipeted in each tubes. Then 1.00,2.00,3.00,4.00, and 5.00 mL of 2.00 x 10-3 M of 2.00 x 10-3 M NaSCN solution was then added to test tubes 2-6 respectively. 5.00, 4.00 ,3.00,2.00 and 1.00 mL of 0.10 M HNO3 was then further added to test tubes 1-6 respectively. The total volume in each test tube is 10 mL. a) what is the concentration of Fe(NO3)3 in 0.10 M HNO3? b) what is the concentration of NaSCN in 0.10 M HNO3 solution?