Part 4Use your shear-force and bending-moment diagrams to determine the maximum positive bending moment, Mmax, pos; themaximum negative bending moment, Mmax, neg, and their respective locations, Xmax, pos and Xmax, neg. Use the bending-moment signconvention detailed in Section 7.2. The maximum negative bending moment is the negative moment with the largest absolutevalue. Enter the maximum negative bending moment as a negative value.Answers:Mmax, posMmax, neg== ikips-ft,, Xmax, pos=kips-ft.Xmax, neg=iftft Part 1For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment Mfor any location in the beam. (Place the origin at point A.) Let w = 9.5 kips/ft, a=10.5 ft, and b=22.0 ft. Construct the shear-forceand bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.Your answer is partially correct.Answers:By=Cy=Calculate the reaction forces By and C, acting on the beam. Positive values for the reactions are indicated by the directions of thered arrows shown on the free-body diagram below. (Note: Since Bx = 0, it has been omitted from the free-body diagram.)a231.1875Bi 77.1875WBbWbkipskipsCyX

Answered: Image /qna-images/answer/92af3d85-46a6-4e29-9bf2-f48cf3dd0721.jpg

Part 4 Use your shear-force and bending-moment diagrams to determine the maximum positive bending moment, Mmax, pos: the maximum negative bending moment, Mmax, neg, and their respective locations, Xmax, pos and Xmax, neg. Use the bending-moment sign convention detailed in Section 7.2. The maximum negative bending moment is the negative moment with the largest absolute value. Enter the maximum negative bending moment as a negative value. Answers: Mmax, pos Mmax, neg = i kips-ft., Xmax pos = kips-ft, Xmax, neg = ft ft

Part 4 Use your shear-force and bending-moment diagrams to determine the maximum positive bending moment, Mmax, pos: the maximum negative bending moment, Mmax, neg, and their respective locations, Xmax, pos and Xmax, neg. Use the bending-moment sign convention detailed in Section 7.2. The maximum negative bending moment is the negative moment with the largest absolute value. Enter the maximum negative bending moment as a negative value. Answers: Mmax, pos Mmax, neg = i kips-ft., Xmax pos = kips-ft, Xmax, neg = ft ft

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3.5 ft, b=9.0 ft, c=4.0 ft, d=3.5 ft, w = 5.5 kips/ft and P = 45 kips. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. For this loading, calculate the reaction forces Ay and Ey acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) Ay =___________ kips, Ey = __________ kips. Determine the shear force acting at each of the following locations:(a) x = 0+ ft (i.e., just to the right of support A)(b) x = 3.5 ft(c) x = 12.5 ft(d) x = 16.5– ft (i.e., just to the left of D)(e) x = 16.5+ ft (i.e., just to the right of D)(f) x = 20.0– ft (i.e., just to the left of support E) Answer: a to f ) V = ________ kips Use the graphical…
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w = 20.0 kips/ft, a=6.0 ft, and b=20.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. a A B a W Calculate the reaction forces By and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Bx = O, it has been omitted from the free-body diagram.) B b b X C X
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w = 20.0 kips/ft, a=6.0 ft, and b=20.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. y A A Answers: By a = Calculate the reaction forces By and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Bx = O, it has been omitted from the free-body diagram.) = a i B Cy i = W B b W b kips X kips X
Part 1 For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w = 9.5 kips/ft, a=10.5 ft, and b=22.0 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. Your answer is partially correct. Answers: By= Cy= Calculate the reaction forces By and C, acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Bx = 0, it has been omitted from the free-body diagram.) a 231.1875 B i 77.1875 W B b W b kips kips Cy X
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3 ft, b-9 ft, c=2 ft and w=10.5 kips/ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. B Ay B b Answers: Ay = i Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) W b CS W C₁ Cy с D kips, Cy= i kips.
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3.5 m, b=5.0 m, MB = 110 kN-m and MC = 145 kN-m. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.Calculate the reaction forces Ay and Dy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.)Determine the bending moment acting at each of the following locations:(a) x = 3.5– m (i.e., just to the left of B)(b) x = 3.5+ m (i.e., just to the right of B)(c) x = 8.5– m (i.e., just to the left of C)(d) x = 8.5+ m (i.e., just to the right of C)When entering your answers, use the bending moment sign convention.Answers:(a) M = kN-m.(b) M = kN-m.(c) M = kN-m.(d) M = kN-m.
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3.5 m, b=5.0 m, MB = 110 kN-m and MC = 145 kN-m. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.Calculate the reaction forces Ay and Dy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.)Determine the shear force acting at each of the following locations:(a) x = 0+ m (i.e., just to the right of point A)(b) x = 3.5– m (i.e., just to the left of B)(c) x = 3.5+ m (i.e., just to the right of B)(d) x = 12.0– m (i.e., just to the left of D)When entering your answers, use the shear force sign convention.Answers:(a) V = kN.(b) V = kN.(c) V = kN.(d) V = kN.
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3.5 m, b=5.0 m, MB = 110 kN-m and MC = 145 kN-m. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.Calculate the reaction forces Ay and Dy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.)Answers: Ay = kN, Dy = kN.
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w = 4.0 kips/ft, a= 6.5 ft, and b= 17.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w=20.0 kips/ft, a=6.0 ft, and b=20.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. "| Answers: By= Calculate the reaction forces By and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Bx = 0, it has been omitted from the free-body diagram.) Cy= Answers: (a) V= (b) V= 351 183.54 (d) V= -120 222.561 (c) V= i -360 B Determine the shear force acting at each of the following locations: (a) x = 6.0-ft (i.e., just to the left of support B) (b) x = 6.0+ ft (i.e., just to the right of support B) (c) x = 25.5 ft (d) x = 26.5-ft (i.e., just to the left of support C) Note that x = 0 at point A.…
Part 1 For the simply supported beam subjected to the loading shown, derive equations for the shear force Vand the bending moment M for any location in the beam. (Place the origin at point A.) Let a-10.5 ft, b-24.0 ft, P- 20 kips and w - 5.5 kips/ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. B Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since A, - 0, it has been omitted from the free-body diagram.) Answers: kips Cy- kips Part 2 Determine the shear force acting at each of the following locations: (a) x = 10.5-ft (i.e., just to the left of point B) (b) x = 10.5+ ft (i.e., just to the right of point B) (c) x = 32.5 ft Note that x-0 at support A. When entering your answers, use the shear-force sign convention detailed in Section 7.2.…
For the beam shown,(1) derive equations for the shear force and the bending moment for any location in the beam. (Place the origin at point A.)(2) use the derived functions to plot the shear-force and bending-moment diagrams for the beam. Specify the values for key points on the diagrams. Let , , , and . Derive the equations and construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions.