Q1/A structural part is 1-meter-long and subjected to a 50 KN load in which this partmust be deformed elastically without experiencing any permanent deformation. If youknow that part is made of steel, brass, aluminum, and Titanium alloys and the yieldstrengths and densities of these alloys are: 860 MPa, 7.9 g/cm³; 415 MPa, 8.5g/cm³; 310MPa, 2.7 g/cm³; and 550 MPa, 4.5 g/cm³ respectively. Based on these criteria, rank thealloys from the heaviest to the lightest in weight.

Answered: Image /qna-images/answer/e9f7432e-7137-4e36-8f47-4cbb05697b88.jpg

now that part is made of steel, brass, aluminum, and Titaniu rengths and densities of these alloys are: 860 MPa, 7.9 g/cm³; 4 Pa, 2.7 g/cm³; and 550 MPa, 4.5 g/cm³ respectively. Based on loys from the heaviest to the lightest in weight.

now that part is made of steel, brass, aluminum, and Titaniu rengths and densities of these alloys are: 860 MPa, 7.9 g/cm³; 4 Pa, 2.7 g/cm³; and 550 MPa, 4.5 g/cm³ respectively. Based on loys from the heaviest to the lightest in weight.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Calculate thermal stress on an object given its original volume, temperature change, volume change, and bulk modulus.
Young Modulus of a material has characteristics of : (Choose TRUE or FALSE for each statement) Can be obtained by the gradient of stress versus strain graph. OTRUE OFALSE As a measurement for a material due to its resistance, subjected to the exerted forces. O TRUE O FALSE The two-dimensional plane of the material depends on Young Modulus. O TRUE OFALSE
Q3 : Rank the magnitudes of the moduli of elasticity for the following hypothetical X, Y, and Z materials from the greatest to the least.The appropriate A, B, and n parameters for these three materials are tabulated below; they yield EN in units of electron volts and r in nanometers: Material A В n 2.5 2.0 x 10-5 8. Y 2.3 8.0 x 10-6 10.5 Z 3.0 1.5 x 10-5 9.
A rod with cross-sectional area of 100mm2 is stretched between two fixed points such that the initial tensile load is 10kN. The rod has a modulus of elasticity equal to 180 GPa and a coefficient of linear expansion of 0.00001m/m-C. The initial tension is designed such that the rod will have zero stress when there is a certain change n temperature of the rod environment. What is the temperature (in C, 2 decimal places)?
Compound axial member ABC has a uniform diameter of d-2.4 in. Segment (1) is an aluminum [E₁ - 10,000 ksi] alloy and segment (2) is a copper [E₂ - 17,000 ksi] alloy. The lengths of segments (1) and (2) are L₁ - 78 in. and L₂ - 150 in., respectively. Determine the force P required to stretch compound member ABC by a total of 0.35 in. L₁ A Part 1 Aluminum Answer: A- B Save for Later Calculate the cross-sectional area of the compound member. L2 (2) Copper in.² C P Attempts: 0 of 1 used Submit Answer Part 2 The parts of this question must be completed in order. This part will be available when you complete the part above. Part 3 The parts of this question must be completed in order. This part will be available when you complete the part above.
Larger animals have sturdier bones that smaller animals. A mouse’s skeleton is only a few percent of its body weight, compared to 16% for an elephant. To see why this is so, consider a 70 kg man standing on one leg. The cross sectional area of his femur is 4.8x10-4 m2. Bone has a compressive strength of 1.00 x 108 N/m2. Please answer/label each part of the question clearly a, b, c etc a. What maximum force can act on his femur? (Give your answer in kN.) b. How many times greater is this force than the man’s weight? c. Now consider a giant man scaled up by a factor of 10 in all dimensions. What maximum force can act on the scaled up femur? (Give your answer in kN.) d. The man’s body will increase by a factor of 10 in each dimension. What will be his new weight? (Give your answer in kN.) e. If the scaled up man now stands on one leg, how many times greater is the maximum force than the man’s increased weight?
The steel rails of a railroad track are laid in the winter at a temperature of 15 degrees fahrenheit with gaps of 0.01 feet between the ends of the rails. Each rail is 33 feet long. At what temperature will the rails touch end to end? What stress will result in the rails if the temperature rises to 110 degrees fahrenheit? Answer: 9,434.1 psi. I'm not sure how to come up with this answer. Could you help me work this problem out step by step please?
A sectional steel cable of 3.00 cm2 has a mass of 2.40 kg per meter. If the cable is 500 m long hanging on a vertical cliff, how far the cable is stretched due to weighs itself? Known young steel modulus 2.00 x 10¹¹ N/m2 . (b). If there are two climbers hanging on the cable, determine how far cable is stretched. The mass of climbers is 60 kg and 70 kg, respectively.
"Suppose someone with a body weight of 75 kg is lifting a box weighing 15 kg. If their back forms an angle of 70 degrees with the horizontal plane, and the distance from the object to the center of their body is 0.5 cm. The questions are as follows: 1. Create a free-body diagram for the above condition and apply the sign convention for forces and moments. 2. Calculate the magnitude of the compression force (F compression) and the shear force (F shear) generated. 3. Analyze whether this job is safe to perform."
3. Two specimens with the same dimensions and made from two different materials, A and B, were subjected to tensile testing. The percentage reduction in the area of the specimen made of material 'A' was calculated 3 times that of the specimen made of material B. In this case, O A lthe ductility of material A and B is equal O Bthe material A is brittle and material B is ductile O Cthe material B is more ductile than material A O D nhe material A is more ductile than material B 1. 20 O Aramak için buraya yazıin
True stress-strain curve for materials is plotted between O load/instantaneous area and instantaneous area/original area load/original cross-sectional area and change in length/original length load/instantaneous cross-sectional area original area and log. O O
Stress (MPa) 500 400 Consider the brass alloy for which the stress-strain behavior is shown in the Animated Figure 7.12. A cylindrical specimen of this material 9.9mm (0.3898 in.) in diameter and 98.8mm (3.890 in.) long is pulled in tension with a force of 9780N(2199/b). If it is known that this alloy has a value for Poisson's ratio of 0.35, compute (a) the specimen elongation, (b) the reduction in specimen diameter. Note: because the diameter decreases, enter a minus sign in your answer. Tensile strength 450 MPa (65,000 psi), Strain =0 Stress = 0 MPA Stress =0 psi 70 Strain = 0 Stress 0 MPA 60 Stress = 0 psi 103 psi 50 40 MPa Yield strength 300 250 MPa (36,000 psi) 40 30 200 200 20 100 10 100 0 0 T 10 P 0.10 0.20 Strain 10.065 0 0.30 0.40 30 20 10 Stress (10 psi)