ndustrial plant generates its own power thru heat transfer and mechanical work, from heat energy generator and turbo generator set. A bagasse fired 60 tonner water tube boiler generating 335 psi. And 330°C superheated steam. Condensates at 90°C feedwater absorbing heat at the deaerator and preheater by as much as 3 592 446 KJ/hr that supplies the steam drum at a rate of 10% higher than the steam generated. Tons steam per ton cane is 2. Superheated steam at a velocity of 25 m/sec is supplied to an impulse turbine that drives a generator producing electrical energy. Exhausted heat energy at a velocity of 20 m/sec, before undergoing heat condensations is at 800 KJ/kg. Determine the following: The Boiler Thermal Efficiency

ndustrial plant generates its own power thru heat transfer and mechanical work, from heat energy generator and turbo generator set. A bagasse fired 60 tonner water tube boiler generating 335 psi. And 330°C superheated steam. Condensates at 90°C feedwater absorbing heat at the deaerator and preheater by as much as 3 592 446 KJ/hr that supplies the steam drum at a rate of 10% higher than the steam generated. Tons steam per ton cane is 2. Superheated steam at a velocity of 25 m/sec is supplied to an impulse turbine that drives a generator producing electrical energy. Exhausted heat energy at a velocity of 20 m/sec, before undergoing heat condensations is at 800 KJ/kg. Determine the following: The Boiler Thermal Efficiency

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter22: Condensers

Section: Chapter Questions

Problem 8RQ: Four methods for controlling head pressure in an air-cooled condenser are ______, ______, _______,...

See similar textbooks

Similar questions

Two methods used to power refrigeration compressors on a ship are _____and ____.
An industrial plant generates its own power thru heat transfer and mechanical work, from heat energy generator and turbo generator set. A bagasse fired 60 tonner water tube boiler generating 335 psi. And 330°C superheated steam. Condensates at 90°C feedwater absorbing heat at the deaerator and preheater by as much as 3 592 446 KJ/hr that supplies the steam drum at a rate of 10% higher than the steam generated. Tons steam per ton cane is 2. Superheated steam at a velocity of 25 m/sec is supplied to an impulse turbine that drives a generator producing electrical energy. Exhausted heat energy at a velocity of 20 m/sec, before undergoing heat condensations is at 800 KJ/kg. Determine the following: The Boiler Thermal Efficiency
a steam 8.0 MPa and 485 degree Celsius enters the turbine and expand at condenser pressure of 0.006 mpa for cycle and 1kg of steam. determine heat added, work turbine, energy chargeable and i deal heat rate
a steam 8.0 mpa and 485 degrees celsius enter the turbine and expand at condenser pressure of 0.006 mpa for cycle and 1kg of steam. determine heat added, worknet, thermal efficienc, for the engine determine steam flow for an engine output of 40000 kw, work turbine, energy chargable, ideal heat rate
SITUATIONAL PROBLEM NO IV A reheat cycle with two stages of reheating is executed with steam expanding initially from 20MPA and 540degC. The two reheater pressures are 3.8MPA and 0.97MPa, and the steam leavers each reheater at 540degC. Condensation occurs at 60degC. For an Ideal cycle of 1kg/s of steam find: 14. Heat Added 15. Turbine Work 16. Heat Rejected 17. Pump Work 18. Net Work 19. Thermal Efficiency of the system
b. A refrigerating system using Freon-12 has an evaporator saturation temperature of - 25°C and a condenser saturation temperature of 35°C. The vapor is dry saturated at entry to the compressor and has a temperature of 65°C after compression to the condenser pressure. There is no undercooling of the liquid in the condenser. i. Calculate the input power required by the compressor per kW of refrigeration. ii. Calculate the COPRef of the refrigerating system. ii. Show the operating cycle of the refrigerating system on a T-s diagram.
Steam at 10 MPaa, 550 degrees celsius enters an ideal engine that has one stage of regenerative cycle; condenser pressure is 10kPaa and extraction of steam is at 1 MPa. Compute the following 3. Heat rejected from the condenser 4. Pump work
The condensing pressure for a Rankine engine is 0.001325 MPavac. Calculate the following for steam flow rate = 16.3846 kg/sec of steam when the steam at the beginning of expansion is at 119.6 deg SH and 4.0 Mpaa. Draw the TS and equipment diagrams for the ideal and actual case and find for the following for the ideal case: PV and TS diagrams of the cycle showing ideal and actual process lines Heat rejected at condenser (KJ/sec). Ans.____________________________ Mass of cooling water in kg/sec if cp H2O = 4.18 KJ/kg-K, and inlet temp of water to condenser = 20 deg C, outlet temp is 35 deg C. Ans.___________________________
Steam at 10 MPaa, 550 degrees celsius enters an ideal engine that has one stage of regenerative cycle; condenser pressure is 10kPaa and extraction of steam is at 1 MPa. Compute the following 5. Steam rate
Steam at 10 MPaa, 550 degrees celsius enters an ideal engine that has one stage of regenerative cycle; condenser pressure is 10kPaa and extraction of steam is at 1 MPa. Compute the following 6. Heat rate 7. Cycle Efficiency
By adding a condenser to the steam plant in problem#1, the turbine back pressure was reduced to 0.2 bar. Find The condition of the exhaust moisture from the turbine The work ratio The specific steam consumption (Problem#1 In the open-circuit steam plant, boiler feed water at atmospheric pressure 1 bar and 35oC is pumped into an oil-fired boiler which produces dry-saturated steam at 10 bar. This steam enters a steam turbine and is expanded isentropic ally to atmospheric pressure and freely discharged into the atmosphere. )
Please show step to this problem Heat added to the working fluid at the boiler stage , Heat removed from the working fluid at the condenser stage, Cycle pump power requirement , Turbine power production , Cycle efficiency