i need the answer quickly H.WO: A BJT is specified to have Timax = 150 c and to beCapable of dissipating maximum power as follows40w atTc =2502w at TA = 25°Clet Ojc = 3.12% / w and OJA = 62.5 °C/W, find the following:The max. Power can be dissipated at TA= 50°C.2 The max. Power Can be dissipated at TA = 50°c witha heat sink for which ecs=0.5 °C /w and OSA = 4°C/W.3 The max. Power can beclissipated, ifis used and TA = 50°C.an infinite heatSinkAns: 1.6W 2 13.1 W332w

Answered: Image /qna-images/answer/6ac528b1-9cfb-4ebd-bfa2-f281639a39f4.jpg

H.WO: A BJT is specified to have Timx = 150 c and to be Capable of dissipating maximum power as follow! 40w at Tc = 25% 2w at TA = 25°C let Ojc = 3.12% / w and OJA = 62.5 ¢/W, find the following: O max. Power can be dissipated at TA= 50°C. 2 The max. Power Can be dissipated at TA = 50°c with a heat sink for which ecs = 0.5 °C/W and eSA = 4 °C/W.

H.WO: A BJT is specified to have Timx = 150 c and to be Capable of dissipating maximum power as follow! 40w at Tc = 25% 2w at TA = 25°C let Ojc = 3.12% / w and OJA = 62.5 ¢/W, find the following: O max. Power can be dissipated at TA= 50°C. 2 The max. Power Can be dissipated at TA = 50°c with a heat sink for which ecs = 0.5 °C/W and eSA = 4 °C/W.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

SINUSADAL ALTER UATING SIDES 5CM 471t is APPUED TO A H. 5cm IS WOUND HTH 300 TU IN 3.) A SINUSODAL ALTERUATING SINUSADAL ALTERNATING VOLTAGE HAC N C.m.s VALUE OF 200 V FREQUENCY OF so Hz. IT THE ZERO AXIS IN A CROSSES POSITIVE DIRECTION KHEN t=0. DETERMINE li) THE TIME WHEN VOLTAGE FIRST REACHES THF STANTANEOUS VUE OF 2wY AND (i) THE TME HEN KOUAGE LETER PASSING THROUGH Ts MAXIMUM POSITIVE YALUE REACHES THE VALUE 11141.4 V. (0.0025 SELOND (ii) 1/300 SECOND) OF 200 SN 47 E iS APPUED TO A HW AN ALTEFNSTNG VOLTAGE SEPIES VITH A KRISTANE OF 40 2.IF THE
chapter 1 Q1 The rms value the AC input voltage to the of Circuit shown is 230U, and the firing angle is maintained Current is 5 A. constant at 45° so that the load a) Calculate the de output voltage. b) Assume that the load resistance remains the a same, find the current is a FWD is used at the output. c) If^ prime prime ScR^ prime prime " is open circuited, find load voltage and current a is the Same) (FWD is still connected and high. "L Load Ans[146.4U,6.03A ; 3.c2A] 3 3 FWD
Exercise-1 Vs = 240V 60Hz Is=10A/....... Power system Is ww R 1k0 Xc=-j/(2pi60x0.00016)=-1994 XL=ZL=j2pifl=j2pi60x0.142=j53.54 142mH Is=Ir+IL+Ic=.........=Vs/Ztotal=....... 160μF
(a) What is the frequency in Hertz and rad/s of the voltage waveform shown on Figure Q1? (b) Calculate the average voltage and rms ac voltage of the waveform shown on Figure Q1. (c) Calculate the total rms voltage of the waveform shown on Figure Q1. (d) The voltage on Figure Q1 is connected across a 0.15 2 resistive load. Calculate the power dissipated in this resistor.
3. For a parallel circuit of 20 ohms resistor and a 10 ohms inductor, is connected to a 110/60 cps Volts source a) find the Impedance b) determine current IR c) determine the current IL d) find the inductance.
Ererrises: IA platinum oil has a resifance of 3-14k r at go°C and 3.747JV at 100°C.- Fin'd the resistance at o'C ond the kmp -creff. of resifonce af 40°C 2. A pofential difference of r5oV is apphed to a field wnding at 15°C and the currend is SA. What will be the mean fempouafure of the winiding when currend has falen to 3.91A, apphedvrltage being constant Aasume s =p7.5. 3. A cril has a resi fance of 182 when its mean femperature is 20°C and 20v when ik mean femperature s 50°C. Frid is mean femperature rise when ik resotonce is 21JL and the sorrandinig femperature is i5°C. A cril of a relay takes a curre of 0.12 A when it is at the vem insbi o al 4. A jemperature of is'C ond canneckerdacms a oV supply If the minimum operating current of the relay is 0.1 A, colculate the femperature above ohich the relay will fail to operate when connected ti the same supply. Resi tncenfemp.coefficrenf of the cril makria] is o.0043 per °C at 0°C.
A single phase AC chopper supplies a pure inductive load of 0.02H from 220V, 50HZ AC supply. The triggering angle of the thyristors is 100°. (Assume the circuit is ideal.) a. Sketch the circuit b. Develop the load current expression and find the decay angle of the load current c. Sketch the load voltage and load current waveforms d. Calculate the RMS value of load voltage e. Calculate the RMS value of load current f. If the triggering angle of the thyristors is chosen as 60°. Explain the operation of the circuit.
Find the DC value and RMS value from this image in below. , I want the solution in a detailed picture with a white paper and a clear font. Thank you.
A full wave ac voltage controller with 25 Ω resistive load is shown in the figure; It is desired that the load receive an effective current of 9.6 Arms; if the input voltage is Vm = 440 V, calculate:a) The firing angle of each SCR to have a symmetrical output voltage wave.b) the rms output power.c) The apparent power of the source.d) The rms current of each SCR.e) The average current of each SCR. Please answer all subpart either dislike is ready..
Use the image to answer the 3 part question. A)determine the impedance of the circuit. B)determine the average power provided by the source to the circuit. C) Determine Vr the maximum voltage drop through the resistor and Vc max the maximum voltage drop through the capacitor
1T 1L Q.12: The non-sinusoidal applied voltage for the circuit shown is: (e,=5+4sin1000t+2sin3000t) V. 1. Derive the equation of currents (i) & (ic). 2. Find the total power consumed in the circuit? (Ans.: ir=1+0.73sin(1000t-24°) A, ic=0.09sin(100ot+ 155.8°) A & P;=6.33W) eT 1C -J18N J2N
An alternating current varying sinusoidally with a frequency of 50 Hz has anrms value of 20 A.a) Determine the instantaneous value at 0.0025 seconds.b) Determine the instantaneous value, 0.0125 seconds after passingthrough a positive maximum value.c) At what time, measured from a positive maximum value, will theinstantaneous current be 14.14 A?