Determine the pH of a solution that contains 2*(10^-4) mg/L of OH- (at 25 degrees)
Q: lly holds 100 gallons of brine that contains 150 pounds af salt, and tank B holds 100 gallons of…
A: Given:- Tank A holds= 100 gallons of brine Tank A =150 pounds of salt Tank B holds-100 gallons of…
Q: A municipal waste water has a BOD5 of 200 mg/L at 20 ˚C. The reaction rate constant k at 20 ˚C is…
A: Given data: Amount of BOD5 at 20°C (yt) = 200 mg/L Time (t)= 5 days (because, BOD5) Constant (k20)…
Q: A tank contains 1,500 L of water and 20 kg of dissolved salt. Fresh water is entering the tank at 15…
A:
Q: Circular clarifiers are used to remove solid materials from water. They allow continuous treatment…
A:
Q: a 200-gallon capacity tank initially contains a salt solution consisting of 20 lbs of salt dissolved…
A: A saline solution is a salt and water solution. The sodium concentration in normal saline solution…
Q: Q/ A wastewater treatment use an activated sludge process for secondary treatment of 10000 m/day for…
A: Inflow Rate (Q) = 10000 m3/dayInitial BOD (S0) = 150 mg/L =150×10-610-3 kgm3 = 0.15 kg/m3Soluble…
Q: Give other substances that can be used as coagulating agent in water purification besides aluminum…
A: As per guidelines we need to answer only first question so please repost rest questions separately.
Q: A coagulation treatment plant with a flowrate of 0.05 m3/s doses with ferric sulfate at 20.0 mg/L.…
A: Given data, Flow rate = 0.05 m^3/s = 50 l/s = 432,0000 l/d Influent suspended solids = 36 mg/l…
Q: CIVIL ENGINEERING (ii) A treatment plant disposes 50 MLD of treated effluent into a river. The river…
A: Given- Discharge Qw=50 MLDRiver discharge QR=20 m3/sRiver DO DOR=8 mg/LEffluent BOD yw=50 mg/LRiver…
Q: 100-mL water sample is mixed with 200 mL of deionized water for BOD analysis. The DO of the mixture…
A:
Q: For a BOD analysis, 30 ml of waste with a DO of zero mg/L, is mixed with 270 ml of dilution water…
A: Biological oxygen demand is the measure of amount of oxygen required by microorganism to oxidize…
Q: A water contains a suspended solids concentration of 10.30 mg · L−1. Coagulation reduces this to 1.0…
A:
Q: Q-3: A river before its entry into a town had a discharge of 100 1/sec and 20 mg/L as the…
A:
Q: What is the pH of a buffer made from 0.350 mol of HBrO (Ka = 2.5 × 10⁻⁹) and 0.090 mol of KBrO in…
A:
Q: 4 2.LacticacidhasaKa of1.38x10 . What is the pH of the solution that results when 25.0 mL of 0.300…
A: Since 25.0 mL of 0.300 M lactic acid are titrated with 20.0 mL of 0.375 M KOH solution. ⇒0.375 M KOH…
Q: A container contains 200 g of solution in which 30 grams of salt are dissolved. Brine containing 1g…
A:
Q: Q4: Wastewater mixed with a river at a point resulting in a mixture whose characteristics are…
A:
Q: The Volume of NaOH (0.01N) when use ph.ph indicator is 12.4mL and 3mL when use methyl Orange (M.O)…
A: Given data: Normality of NaOH = 0.01 N Volume of methyl orange (V1) = 3 mL Volume of phenolphthalein…
Q: ow can you determine chloride content in a waste water samp
A: Solution: Chlorides are present in all types of water resources at varying concentration depending…
Q: A tank is initially filled with 100 gallon of salt solution containing 100 Hb of salt. Fresh brine…
A: To determine the: amount of salt at any time time taken for the amount to salt to reach 150 lb…
Q: A tank initially holds 1 cubic meter of a brine solution containing 20 kg of salt. At t = 0, fresh…
A:
Q: tank
A:
Q: 21.The waste water treatment plant has dissolved oxygen concentration of 2.8 mg/l and a discharge…
A:
Q: A Brine containing 2 lb of salt per gallon runs into a tank at 2 gal/min, brine from this first tank…
A: The figure is shown below,
Q: Q.5. The design flow for a water treatment plant (WTP) is 1 MGD. The rapid mixing tank will have a…
A:
Q: Sanitary Engineering laboratory "jar test " Why is alum preferred to other coagulants? What is…
A: Given data Jar test Alum Coagulation Flocculation According to guidelines of bartleby I have to…
Q: A tank with a capacity of 1500 gallons originally contains 1000 gals of fresh water. The first pipe…
A: Given: capacity of tank 1500 galon having 1000 galon fresh water first pipe 1/2 lb Of gallon is…
Q: design an aeration tank of CASP based on the following data influent flowrate is 100000m3/d,…
A: Assume Y = 0.5 kg/kg, θc = 5 days, kd=0.06 per day, X=0.3 V = 23684.21 m3
Q: 1. A groundwater contains the following constituents: CO2 = 9.6 mg/L Ca2+ = 95.2 mg/L Mg2+ = 25.8…
A: The given data is: Constituents of ground water CO2 = 9.6 mg/l Mg2+ = 25.8 mg/l Ca2+ = 95.2 mg/l…
Q: Sketch a typical treatment process scheme for the treatment of raw water containing a turbidity of…
A:
Q: A 200-gal tank is half full of distilled water. At time t=0, a solution containing 0.5 Ib/gal of…
A: Given: Volume of Tank = 200 gal At t=0, 0.5lb/gal of concentrate enters tank at rate 5gal/min Rate…
Q: A tank contains 1,500 L of water and 2020 kg of dissolved salt. Fresh water is entering the tank at…
A: For Salt dydt = Rate in - Rate out ...(1)intering Rate = 0 , ( Because only fresh water is…
Q: The quantity of sludge produced from an aeration tank is 2,453 kg/day. The volume of the aeration…
A: The sludge loading is X=2453 kg/day. The volume of aeration tank is V=8500 m3. The inlet BOD is…
Q: Calculate the BOD concentration based on the data below. DOinitial (mg/L) 7 DO final (mg/L 3.5…
A: step 1-
Q: What would be the pH if 10-2 moles of hydrofluoric acid (HF) were added to 1 L pure water? The pKa…
A: Hydrofluoric Acid (HF)HF = 10-2 moleVolume = 1 litreconcentration = 0.01 mole /l HF ⇌…
Q: t more than 7 mg/L of soluble BOD in the effluent. The mixed liquor has a concentration of 3000 mg/L…
A:
Q: A 100-gal tank initially contains 25 gal of 50% salt solution. Fresh water is then poured into the…
A:
Q: A Semi-solid waste storage has a volume of 1145 m3. The basin is initially 71% empty. The semi-solid…
A:
Q: Please answer in 5 mins a tank is initially filled of capacity of 25 L with brine having a salt…
A:
Q: The following dissolved-oxygen values were found after 5days of incubation in 310-mL BOD bottles:…
A: Biochemical Oxygen Demand or BOD is defined as the oxygen required to oxidize the biodegradable…
Q: 2. The BOD5 of a waste sample was found to be 60 mg/L The initial oxygen concentration of the BOD…
A:
Q: A river flowing at 15 m^3/sec has a tributary feeding into it with a flow of 5 m^3/sec. The stream…
A: Given data: Flow rate of river (Q1) = 15 m3/s Flow rate of tributary (Q2) = 5 m3/s Concentration of…
Q: Calculate the pH and alkalinity (in mol/L) of a water that contains 120.0 mg/L of bicarbonate ion…
A: Convert carbonate and bicarbonate mg/l into OH- mg/l.
Q: The partial pressure for CO2 at the earth’s surface is 10^−3.4 atm. 1) Determine the partial…
A: Given, Pco2 = 10-3.4 atm C = 10 ppt = 0.01
Q: Using a mass balance, derive a design equation (concentration as a function of time) for a batch…
A: Accumulation=rate of mole in-rate of mole out±rate of disapporval/generation0-0-rAV=dNAdt ,…
Q: Waste activated sludge contains 1% dry solids that are 80% volatile. Determine: a. The specific…
A: Specific gravity is the ratio of the density of a substance to the density of given reference…
Q: Q3: the 2000 gallon tank initially contains 600 gallons of water with 5 lbs of salt dissolved in it.…
A:
Q: Table Q1-2 Weight (g) Mass of residue after drying at 105 ¿C Mass of residue after ignition at 550…
A:
Q: A vessel contains 200 Liters of brine with 30 grams of dissolved. salt. Brine containing 1 gram of…
A: For the given conditions, the amount of salt in the tank after 5 minutes is to be determined.
Determine the pH of a solution that contains 2*(10^-4) mg/L of OH- (at 25 degrees).
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- d) Calculate total hardness in ppm of a solution of both 55 mg/L Al2(SO4)3 and 45 mg/L Mg(NO3)2.Please choose the correct answer for each question: 1. Activity of a gas in equilibrium with solution is ______? A. its partial pressure; B.1.0; C. its molar concentration; D. 0.0 2. During a sorption procedure, the substance transferred from the gas or liquid phase to the solid phase is called ______ A. sorbent; B. sorbate; C. partition; D. none of the above 3. When a chemical has a lower KOW, it is more ______ A. hydrophobic; B. hydrophilic; C. more absorbable; D. less absorbable 4. _____ occurs on the adsorbent surface A. Adsorption; B. Sorption; C. Absorption; D. Adsorption and absorption 5. _____ addresses the change in the amount of a substance of interest with time. A. The equilibrium approach; B. The kinetic approach; C. Henry’s Law; D. Freudlich isotherm equation1-7. A water contains 200 mg/L Ca, 75 mg/L Mg, 180 mg/L HCO3, and 150 mg/L. CO₂, all expressed as CaCO3. Determine the chemical dosages required to soften this water as much as possible without removing magnesium. What will the final hardness be? 1-8. If the water of Prob. 11-7 is to be softened to a final hardness of 85 mg/L as CaCO, and is not to contain more than 25 mg/L. Mg as CaCO3, find the required chemical dosages. Solve 11-7
- Ca+2 = 36.8mg/L Mg+2 = 2.9mg/L HCO3 = 98mg/L pH = 7.53 Temp = 9C Calculate the following: a. Hardness in units of mg/L as CaCO3 b. Ionic strength (be sure to include H++ and OH--) c. PCO2 in equilibrium with the sample d. Saturation index with respect to calcite (SIC) e. Saturation index with respect to dolomite (SID)During a steady flow process, the pressure of the working substance drops from 200 to 20 psia, the speed increases from 200 to 800 ft/s the internal energy decreases 20 BTU/lb and the specific volume increases from 2 to 10 ft³/lb. No heat transferred. Determine the following: a)AKE in ft-lb;/Ibm b)APE in ft-lb/lbm c)AW: (flow work) ft-lb:/lbm d)AH in BTU e) Net work in hp for 15 lb/min of fluid (use mass flow rate for this item only)ES C raudon . A water contains 200 mg/L Ca, 75 mg/L Mg, 180 mg/L HCO,, and 150 mg/L. CO₂, all expressed as CaCO3. Determine the chemical dosages required to soften this water as much as possible without removing magnesium. What will the final hardness be? let
- Communicate the steps during the titration of a weak base with a strong acid. Explain the major concepts of titration and how to calculate the pH at any point on the curve.(Explain as if someone is learning the topic for the first time)Example 2: NaCl equivalent concentration 20,000 ppm. Temperature of %3D concentration 75°F. Find the Resistivity of the solution.Chose the correct answer 1- The Unit measurement of suspended solids is ...A- kg 2- The Unit measurement of Turbidity is A- °C is B-m B-NTU C- mg/L C-K 3- The Unit measurement of pH www A-mg/L 4- The Unit measurement of alkalinity is .. 5-Non toxic metals includes 6-Dissolved materials size is lees than A- 10 mm D- none of above D- none of above D- none of above B- p.p.m C- g/m³ D- none of above A- m/sec B- m³/sec C- mg/L A-Chromium B- Mercury C- Calcium D- none of above B- 106, C-108 mm D- none of above mm 7- Public standards of Hardness in drinking water is A-500 mg/L B-50 mg/L C-100 mg/L D- none of above 8- Alkalinity species includes are A-HCO3 B-CO3 C- OH D-All of above ... 9- Dental cavities in children can prevented when Drinking water has Fluoride concentration of A- 0.1 mg/L B- 1 mg/L C- 10 mg/L D- none of above 10- Toxic metals are metals that harmful to humans even when exists in concentration of .. A- Small B-Large C-zero D- none of above
- Q2: A drop of liguid foluen is kept al uniform temperkure t 299 K and is suspended in air by a fine wire. The initid radius at r= 2mm. The vapor pressure of foluene 299K is f=384 Kfe and the density of liguid toluene is 366 ky Im 3. Derive equation for the time tp for the drop b evupurete Completely in a large volume of still air Calculate the tine in seconds for Complete evaporahion.1. When the force of 3 mN is applied to the plate the line AB in the liquid remains straight and has a velocity of 0.6x103 m/s. If the surface area of the plate in contact with the liquid is 0.6 m?, determine the approximate viscosity of the liquid. B B B' 3 mN 4 mm A11-7. A water contains 200 mg/L Ca, 75 mg/L Mg, 180 mg/L HCO3, and 150 mg/L CO₂- all expressed as CaCO3. Determine the chemical dosages required to soften this water as much as possible without removing magnesium. What will the final hardness be? 1-8. If the water of P7 is to be softened to a final hardness of 85 mg/L as CaCO, and is not to contain more than 25 mg/L. Mg as CaCO3, find the required chemical dosages. 1-9. Design a cation-exchange process which will produce a water meeting the criteria of PT-8. Assuming the salt must be provided in an excess of 100 percent, how much salt would be used per year in a plant with a capacity of 5000 m³/day? Solve 11-8 & 11-7 The manufacturer recom-