Design an architecture as the basis design of a system to control the temperature in a greenhouse based on Environmental Control pattern. The system will have these features : “ The temperature should be between 10 and 30 degrees Celsius. If it falls below 10 degrees, the heating system should be switched on; if it goes above 30, the windows should be automatically opened.”

Design an architecture as the basis design of a system to control the temperature in a greenhouse based on Environmental Control pattern. The system will have these features : “ The temperature should be between 10 and 30 degrees Celsius. If it falls below 10 degrees, the heating system should be switched on; if it goes above 30, the windows should be automatically opened.”

Principles of Information Systems (MindTap Course List)

12th Edition

ISBN:9781285867168

Author:Ralph Stair, George Reynolds

Publisher:Ralph Stair, George Reynolds

Chapter4: Software: Systems And Application Software

Section4.7: Ethical & Societal Issues: Digital Software Systems May Improve Nuclear Power Plant Safety

Problem 2CTQ

See similar textbooks

Similar questions

Create a UML State Machine Diagram for the following description of an Engine Control Unit: The ECU generally starts in the state “off.” Once the engine is started, the engine control unit powers up as well. While the ECU is fully powered up, it is usually in idle mode, delivering the minimally necessary fuel with a lean air/fuel mixture to the engine, and igniting appropriately. As soon as the driver presses the gas pedal, the ECU calculates the necessary torque. To do so, it first checks the new gas pedal position, then as long as the gas pedal position remains the same, calculates the necessary air and fuel supply as well as the ignition point. As soon as these values are computed, the ECU does three things simultaneously: it checks if the air and fuel amount currently supplied to the engine is still appropriate. If more or less fuel or air is needed, the ECU will assume the adequate operation mode of “less fuel” or “more air,” etc. The third thing the ECU does is to check if the…
The three stages that are employed in the physical design stage should be identified and described briefly.
In this topic, a simulation viewpoint on a system's components may be useful.
Draw a system context diagram for a programmable smart holiday music concert lighting system for an amphitheater. It includes a sound system, three spotlights and four rotating color changing lights. It also includes a device to establish its own IP address for the system so that the end user can access the system via the internet. It may also be accessed via wifi/bluetooth. The system should automatically come on about 30 minutes after sunset and should turn off after 5 hours if the system is still running. The system should be able to be manually turned on or off by the end user with a switch or via the internet/wifi. The system is connected to 110V using an electrical plug but may run off a generator for remote locations. The system should be able to play a predefined lighting pattern along with a song over the included speakers. PART B Design a diagram for the system with 4 input and 4 output functions
The following diagram is a state diagram for the weather station system that shows how it responds to requests for various services. Please explain it in details
Is there a predetermined kind of system that may be part of a system's construction?
Microkernel design has a guiding principle that must be adhered to. In what ways is it different from the modular approach?
Many systems designed in the real world need to work in synchrony with each other. This is true for traffic lights working in synchronization with pedestrian signals. a. Design transition system diagrams with handshaking labels for pedestrian light, two traffic lights and a controller. The traffic lights go through states: Green, Yellow and Red. The pedestrian light goes through Walk and Do Not Walk. The intersection is a two-way road as shown. T2 P1 T1 b. Then perform the parallel composition of the three models. Now identify, are there any unsafe possibilities.
Create a block diagram for the system and explain the operation of each block: (Please write properly) A system that tracks the sun (from sunrise to sunset, nighttime the sunrise again). This system is very similar to the building blocks of a system that will control the steering system (using a DC motor) of a line following a mobile robot (mo-bot). Very similar also to its system that will control its forward/reverse movement.
Draw an overall State Diagram to represent the Air Ventilation Unit using Harel’s UML approach. Ensure that you represent all of the parallelism. APPENDIX: Air Ventilation Unit The brief specification of a new air ventilation unit would include three main subsystems: A set of 3 sensors for the measurement of heat, CO2 (Carbon Dioxide) and ozone. A fan system that can be set to High, Low and OFF. A Heating Element that can be set to 20o, 16o, 14o Celsius. The system will have a control panel allowing the setting of initial values but once running the system should work automatically to control the temperature and air quality. Standard cut-off points would be that CO2 stays between 400 and 800 parts per million. If it goes beyond 800 the fan should move to HIGH until it drops to 600. If the temperature drops 2 degrees below its setting the heat should turn on until it is 2 degrees above its setting. Ozone levels should be below 0.08 parts per million (ppm) again…
The process of flushing a toilet can be described as a control system. Draw a diagram to show the different components of this mechanical control system. Complete the following table for this control system. Element Physical Element Controlled variable Reference variable Comparison element Error Signal Control Unit Correction Unit Process Measuring Device
Draw the basic building blocks of the following system. Explain briefly the operation/function(s) of each block in your system. A system that tracks the sun (from sunrise to sunset, nighttime the sunrise again). This system is very similar to the building blocks of a system that will control the steering system (using a DC motor) of a line following a mobile robot (mo-bot). Very similar also to its system that will control its forward/reverse movement.