Consider a person whose exposed surface area is 1.5 m2, emissivity is 0.5, and surface temperature is 28°C. Determine the rate of heat loss from that person by radiation in a large room having walls at a temperature of two situations of 280 K and 300 K. Use Stefan-Boltzmann constant as 5.67 x 108 W/m2-K. [Pertimbangkan seseorang dengan luas permukaan yang terdedah sebanyak 1.5 m, keberpancaran sebanyak 0.5, dan suhu permukaan 28°C. Tentukan kadar kehilangan haba daripadanya disebabkan sinaran di dalam bilik besar dengan dinding suhu pada dua situasi iaitu 280 K dan 300 K. Gunakan pemalar Stefan-Boltzmann sebagai 5.67 x 10 W/m' K',] Briefly discuss the radiation heat transfer with respect to temperature change based from your answer in Question 3(c). [Bincangkan dengan ringkas kadar perpindahan haba disebabkan perubahan suhu berdasarkan jawapan anda pada Soalan 3(c).]

Consider a person whose exposed surface area is 1.5 m2, emissivity is 0.5, and surface temperature is 28°C. Determine the rate of heat loss from that person by radiation in a large room having walls at a temperature of two situations of 280 K and 300 K. Use Stefan-Boltzmann constant as 5.67 x 108 W/m2-K. [Pertimbangkan seseorang dengan luas permukaan yang terdedah sebanyak 1.5 m, keberpancaran sebanyak 0.5, dan suhu permukaan 28°C. Tentukan kadar kehilangan haba daripadanya disebabkan sinaran di dalam bilik besar dengan dinding suhu pada dua situasi iaitu 280 K dan 300 K. Gunakan pemalar Stefan-Boltzmann sebagai 5.67 x 10 W/m' K',] Briefly discuss the radiation heat transfer with respect to temperature change based from your answer in Question 3(c). [Bincangkan dengan ringkas kadar perpindahan haba disebabkan perubahan suhu berdasarkan jawapan anda pada Soalan 3(c).]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An ice-skating rink is located in an indoor shopping mall with an environmental air temperature of 22-C and radiation surrounding walls of about 25-C. The convection heat-transfer coefficient between the ice and air is about 10 W/m2 - C because of air movement and the skaters' motion. The emissivity of the ice is about 0.95. Calculate the cooling required to maintain the ice at 0-C for an ice rink having dimensions of 12 by 40 m. Obtain a value for the heat of fusion of ice and estimate how long it would take e to melt 3 mm of ice from the surface of the rink if no cooling is supplied and the surface is considered insulated on the back side.
A furnace must be built with an inner layer of refractory brick (conductivity 1.27 Kcal/h mºC). This layer must be coated with a layer of insulating brick (conductivity 0.134 Kcal/hm ºC) 22 cm thick, in turn covered with a 15 cm layer of building brick (conductivity 0.75 Kcal/ hm°C). The inner surface of the refractory wall will operate at 1150ºC and the outside at 65ºC. How many centimeters of refractory brick would be required for the insulation not to exceed 930ºC (safety limit of the material in question).
2 inch OD during a visit to a plastic sheet factory 60 m long section of a horizontal steam pipe passes from one end to the other without insulation is observed. While the temperature of the ambient air and its surfaces is 20 °C, the temperature measurements at several points are the average of the exposed surfaces of the steam pipe. indicates that the temperature is 160 °C. It is seen that the outer surface of the pipe is oxidized and The emissivity can be taken as 0.59. According to this; a) Calculate the heat loss in the steam pipe. b) The steam used is produced in a gas furnace operating with an efficiency of 59%. Factory 105500 It pays $1.10 per kJ of natural gas. If it is assumed that the factory works all year (365 days), for this facility Calculate the annual cost of heat losses in the steam pipe.
(b) Consider a sealed 20-cm-high electronic box in Figure 1 whose base dimensions are 50 cm x 50 cm placed in a vacuum chamber. The emissivity of the outer surface of the box is 0.95. If the electronic components in the box dissipate a total of 120 W of power and the outer surface temperature of the box is not to exceed 55°C, determine the temperature at which the surrounding surfaces must be kept if this box is to be cooled by radiation alone. Assume the heat transfer from the bottom surface of the box to the stand to be negligible. 50 cm 120 W € = 0.95 T₁ = 55°C 20 cm Stand 50 cm. Figure 1 Electronic box
A man is working in a chamber enclosed with black walls. If the air around the worker is at 20oC, the walls are at 100oC, and the heat transfer coefficient between the worker and the air is 15 W/m2-oC, what temperature will the worker feel? Assume the radiation emissivity of the worker’s cloth is about 0.8.
A 50 cm x 50 cm square circuit board with chips on one side at 25 °C by vertical convection and radiation in a room at room temperature will be cooled. Each chip emits 5900 W of power and the chip The emissivity of their surfaces is known as 0.59. of chips the back side of the surface on which it is placed is insulated and the temperature of the surrounding surfaces It is 20 °C. Cooling of the surface where the chips are located to 35 °C If desired, calculate the number of chips that can be placed on this plate.
Required information Consider a person whose exposed surface area is 21 m4, emissivity is 0.5, and surface temperature is 32°C. Given: 0 = 5.67×10-8 W/m2.K4 Determine the rate of heat loss from that person by radiation in a large room having walls at a temperature of 300 K (upto 3 decimal places). You must provide an answer before moving to the next part. The rate of heat loss from the person at 300K is W.
Question 4:Consider a person standing in a room maintained at20°C at all times. The inner surfaces of the walls, floors, and ceiling of the house are observed to be at an average temperature of 12°C in winter and 23°C in summer. Determine threats of radiation heat transfer between this person and the surrounding surfaces in both summer and winter if the exposed surface area, emissivity, and the average outer surface temperature of the person are 1.6 m2, 0.95, and 32°C, respectively.
A window panel that measures 20.0 cm by 15.0 cm is set into the front door of a house. The glass is 0.32 cm thick. The temperature outdoors is −15°C and inside is 22°C. The single-paned window is replaced by a double-paned window with an argon gas gap of 12mm between the two panes. The inner surface of the inner pane is at 22°C, and the outer surface of the outer pane is at −15°C. ( C glass=0.63 W/mK)Specific heat of Argon is 0.52 J/g K. Latent Heat of Fusion of Argon is 1.188 kJ/mol .calculat and compare the heat transfers
Heat is generated in a 1.4 m long and 0.2 cm diameter electrical resistance wire placed in the middle of a room kept at 20 degrees. Under continuous conditions, the surface temperature of the wire was measured as 180 ° C, the voltage drop on the wire as 110 V and the electric current as 3 A. Regardless of radiative heat transfer,Find the heat transfer coefficient for the heat transfer between the surface of the wire shown in the figure and the room air.
A 10cm ball made of tungsten is to be heated from 100C to an average temperature of 150C in 30 minutes. Determine: (a) the total amount of heat that needs to be transferred to the ball; (b) the average rate of heat transfer to the ball; (c) the average heat flux S中钨在线 chinatungsten.com Blank Balls Polished Balls Punching Balls Bearing Balls Valve Balls Non-magnetic Balls (在

A radiator plate of 0.2-m (wide) x 0.4-m (height) is in a room of 22°C. One side (the hot side facing the room) of the radiator plate is maintained at a temperature of 80°C, the other sides are assumed to be insulated, as shown in Figure 1. If the following assumptions can be made: 1) steady operating conditions exist; 2) the air an ideal gas; 3) the local' atmospheric pressure is 1.00 atm: (a) Briefly and qualitatively analyze the four different locations for the radiators marked A), B), C) and D), as shown in Figure 1, and rank them in terms of heat transfer efficiency by natural convection. (b) Determine the rate of heat transfer from the radiator plate by natural convection if the plate is A) vertical and C) horizontal with the hot surface facing down. Compare the two and provide a brief discussion of the findings. wall A 0.4 mi C 0.4 m 0.4 m B floor ceiling 0.4 m wall Nu Nu=0.59Ra Nu-0.1 Raa 0.387Ral Nu- - {0.825 + 11 + (0.492/Pr)162) (complex but more accurate) Use vertical plate…