Answer whether each of the following questions is (True) or (False)? Write the true answer if it is false: a) The purpose of using phasor diagram in representing the voltages or currents of AC circuit is to simplify the mathematical operations of quantities. b) Increasing the distance between the source and the load requires decreasing the cross-sectional area of the conductors in order to reduce copper losses. c) The induced eddy currents in an iron-cored coil must be flowing in opposite sense to the coil current.

Answer whether each of the following questions is (True) or (False)? Write the true answer if it is false: a) The purpose of using phasor diagram in representing the voltages or currents of AC circuit is to simplify the mathematical operations of quantities. b) Increasing the distance between the source and the load requires decreasing the cross-sectional area of the conductors in order to reduce copper losses. c) The induced eddy currents in an iron-cored coil must be flowing in opposite sense to the coil current.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter7: Symmetrical Faults

Section: Chapter Questions

Problem 7.21MCQ

See similar textbooks

Similar questions

(a) Explain briefly what is fringing effect and leakage flux. (b) A ferromagnetic core is shown in Figure 1. The depth of the core is 10 cm. The other dimensions of the core are as shown in the figure. By assuming the magnetic leakage to be negligible and relative permeability of the core is 800. Calculate the total reluctance and find the value of the current that will produce a flux of 0.01 Wb. With this current, calculate the flux density at the top of the core 20 cm 40 cm 10 cm, 30 cm 500 turns 30 cm 30 cm Figure 1
(b) Briefly explain the energy losses in a ferromagnetic core.
1) A ferromagnetic core is shown in Figure 1. The relative permeability of the core isassumed to be 2500 and constant. There is a 5% increase in the effective area ofthe air gap due to fringing effects. The depth of the core is given as 5 cm.a) Calculate the total reluctance, total, of the core
Amagnetic field is being generated by a current of 2.0A flowing through 180 turns of wire on a core having a reluctance of 210000.0 At/Wb. Determine the flux of the circuit in mWb.
For operation at 60 Hz and a given peak flux density, the core loss of a given core is 1W due to hysteresis and 0.5W due to eddy currents. Estimate the core loss for 400-Hz operation with the same peak flux density.
Figure Q1(a) shows a piece of ferromagnetic core with magnetic flux (B) with circular current (I) around the core. Figure Q1(b) show laminated ferromagnetic core with the same magnetic flux (B) and circular currents. With the aid of diagrams, explain how the current as highlighted in red (I) is developed in the ferromagnetic core in Figure Q1(a). B (a) (b) Figure 1(a) A ferromagnetic core and (b) laminated ferromagnetic core
Q.4/ choose true or false: 1. The reluctance of any core is proportional directly with the length of it and inversely with both the permeability and the cross-section area of it. 2. The number of parallel paths in wave windings is equal to twice of the number of poles. 3. In dc machines with same values of Z, N, Ø, the emf for wave winding type is more than emf of lab winding type. 4. If we insert a current in such a conductor subjected to a constant magnetic field, a movement will achieved giving the principle of electric generator.
(9) The hysteresis losses in electrical machines reduced. a- By core lamination. b- By core isolation. c- By choosing another type of iron. (10) The eddy current losses in electrical machines reduced. d- By core lamination. e- By core isolation. f- By choosing another type of iron.
A ferromagnetic core is shown in Figure 1. The relative permeability of the core isassumed to be 2500 and constant. There is a 5% increase in the effective area ofthe air gap due to fringing effects. The depth of the core is given as 5 cm. The Rtotal is found to be 226.192k At/Wb
-4 poles-26 conductors-double layer-simplex wave winding Can you do this in "armature winding"? Thank you.
3. What are the classifications of Core Loss and Copper Loss?
The core of a transformer operating at 50 Hz has an eddy current loss of 100 W/m3 and the corelaminations have a thickness of 0.50 mm. The core is redesigned so as to operate with the same eddycurrent loss but at a different voltage and at a frequency of 250 Hz. Assuming that at the new voltage themaximum flux density is one-third of its original value and the resistivity of the core remains unaltered,determine the necessary new thickness of the laminations. Clear and detailed solution.