Answer (a) & (b) using the below Figure A ping pong ball can be suspended in a jet of air as shown in the figure. The ping pong ball has a mass of 2.7 g and a diameter of 4.4 cm. Assume that the air has a density of 1.225 kg/m and absolute viscosity of 1.78 x 105 Ns/m?. a) What air velocity is required to keep the ball suspended in the jet? Answer: Choose. b) if the ping pong ball still has a mass of 2.7 gand a diameter of 4.4 cm. Repeat the problem but now assume the ambient fluid is water at 20°C. What water velocity is needed to suspend the ping pong ball at the same position in the water? Answer: Choose.

Answer (a) & (b) using the below Figure A ping pong ball can be suspended in a jet of air as shown in the figure. The ping pong ball has a mass of 2.7 g and a diameter of 4.4 cm. Assume that the air has a density of 1.225 kg/m and absolute viscosity of 1.78 x 105 Ns/m?. a) What air velocity is required to keep the ball suspended in the jet? Answer: Choose. b) if the ping pong ball still has a mass of 2.7 gand a diameter of 4.4 cm. Repeat the problem but now assume the ambient fluid is water at 20°C. What water velocity is needed to suspend the ping pong ball at the same position in the water? Answer: Choose.

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter10: Force And Force-related Variables In Engineering

Section: Chapter Questions

Problem 24P

See similar textbooks

Similar questions

1) Consider a chunk of fluid that is initially shaped as shown hanging off of the edge of a table in the earth's gravity field. Ignore any forces due to the air. Prove that the fluid cannot maintain its shape by analyzing the section labeled “A" (Hint: begin by assuming that A does maintains its shape and does not move ..) i wa ter
1 Proof that a solid aluminum block of 4 mm x 3 mm x 3 mm, such as shown in FigureQ1 (a), can float on water at 20 °C due to the effect of surface tension. The density ofthe aluminum block is 2700 kg/m3. Determine the contact angle. 2. A solid alloy cylinder having a diameter of 6.48 cm slides downward at a terminalvelocity of V through a vertical pipe. The downward motion is resisted by an oil filmbetween the piston and the pipe wall. Determine the oil viscosity when the velocityV is 5 m/s. The inner diameter of the vertical pipe is 6.5 cm, and the alloy density is3500 kg/m3.
10. The cylindrical container in the figure below weighs 400 N when empty. It is filled with water and supported on the piston. (a) What force is exerted on the upper end of the cylinder? (b) If an additional 600-N weight is placed on the cylinder, how much will the water force against the top of the cylinder be increased? Answer: (a) 51.08 kN; (b) 58.9 kN 250-mm diam A 250 mm B 500 mm?
A sealed box filled with a liquid show below can be used to measure the acceleration of vehicles by measuring the pressure at the top point A at the back of the box while point B is kept at atmospheric pressure. Obtain a relation between the pressure PA and the acceleration a.
The figure shows a system for delivering lawn fertilizer in liquid form. The nozzle on the end of the hose requires 169.00 kPa of pressure to operate effectively. The hose is smooth plastic with an ID of 25 mm. The fertilizer solution has a specific gravity of 1.13 and a dynamic viscosity of 2.69 x 103 Pa•s. If the length of the hose is 76 m. The coefficient of friction, f= 0.021 and the flow rate is 97 L/min. Required Determine the power delivered by the pump to the solution in kW, to the nearest 100th. Vent 10 m Pump 1.2 m 1.5 m
working from first principles develop the D'Arcy equation for the head loss in a pipeline.
Paint issues from the tank at a flow rate of 45 ft^3/s. Find the kinetic viscosity in ft^2/s. Assume the flow is laminar. Note: In answering the question, it must be in exponential form but in the text box just write the value no need to include the x10^-1.. 9 ft L=6 ft d=in B Q
Please write the equation correctly, Solve it fast[Don't Copy ] For The configuration shown. What must be the value of the specific weight of the unknown fluid? Express your answers in Ib/ft3.
9. Two balls A and B of masses 100 grams and 300 grams respectively are pushed horizontally from a table of height 3 meters. Ball has is pushed so that its initial velocity is 10 m/s and ball B is pushed so that its initial velocity is 15 m/s. a. Find the time it takes each ball to hit the ground. b. What is the difference in the distance between the points of impact of the two ball on the ground? Formula Vx = Vo cos 0 Vy = Vo sin 0 – gt x = Vo cos et y = Vo sin Ot – gt2
Plss help ASAP A)resulting acceleration in (m/s^2) B)estimate resulting pressure at the bottom of the tank in kilopascal
A rigid steel container is partially filled with a liquid at 15 atm. The volume of the liquid is 1.23200 L. At a pressure of 30 atm, the volume of the liquid is 1.23100 L. Find the coefficient of compressibility in GPA^-1 of the liquid over the given range of pressure if the temperature compression is allowed to return to its initial value. CHOICES: a.0.534 b.1.372 c.1.872 d.1.042
Consider oil flowing through a horizontal pipe at a rate of 3 liter/s. There are two sections of the pipe with diameters 10 cm and 7 cm and the two sections are connected by a smooth reducing section as shown in the schematic. We use a manometer with glycerin as the manometer fluid (with glycerin density of Pglycerin 1,260 kg/m³) to measure the pressure difference between the two pipe sections. Assume that frictional effects are negligible and consider specific gravity of oil as SGoil = 0.76. What is the manometer reading, h (i.e. differential height of glycerin between the two arms of the manometer)? 10 cm I h 7 cm-