A thick-walled cylinder has an outer and inner diameter of 200 and 50 mm, respectively. The cylinder is designed to store fluid at 80 MPa: (a) Determine the external pressure necessary to bring the hoop stress at the outer wall of the cylinder to zero. (b) Draw the variations of the hoop and radial stress across the thickness of the wall. Indicate the stress values at both inner and

A thick-walled cylinder has an outer and inner diameter of 200 and 50 mm, respectively. The cylinder is designed to store fluid at 80 MPa: (a) Determine the external pressure necessary to bring the hoop stress at the outer wall of the cylinder to zero. (b) Draw the variations of the hoop and radial stress across the thickness of the wall. Indicate the stress values at both inner and

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.9P: A cylinder filled with oil is under pressure from a piston, as shown in the figure. The diameter d...

See similar textbooks

Similar questions

: A hollow, pressurized sphere having a radius r = 4.8 in, and wall thickness t = 0.4 in. is lowered into a lake (see figure). The compressed air in the tank is at a pressure of 24 psi (gage pressure when the tank: is out of the water). At what depth D0will the wall of the tank be subjected to a compressive stress of 90 psi?
An 8 mm thick cylindrical steel tank has an outside diameter of 600 mm and a length of 3 m. (a) when the tank is filled with water, determine the circumferential stress. (b) determine the longitudinal stress at the bottom of the when it is filled with water. (c) if the stress is limited to 5 mpa, what is the maximum height of water to which the tank maybe filled.
The tank shown in the figure shown is fabricated from a steel plate. a. Determine the maximum longitudinal stress caused by an internal pressure of 1.2MPA if the steel plate has a thickness of 10mm. b. Determine the maximum circumferential stress caused by an internal pressure of 1.2MPA, if the stress plate has a thickness of 10mm. c. Determine the minimum thickness plate which maybe used if the stress is limited to 40MPA and the internal pressure is 1.5MPA. 1400 mm 400 mm 600 mm
A gas is stored in a cylindrical tank of inner radius 7 m and wall thickness 50 mm. The gage pressure of the gas is 2 MPa. The maximum shear stress (in MPa) in the wall is
mechanics of deformable bodies The cylindrical tank has an outer radius of 1.5m and a wall thickness of 25 mm. If the tank is pressurized to 1.5 MPa, determine the longitudinal stress.
A cylinder has an internal diameter of 230 mm, has walls 5 mm thick and is 1 m long. It is found to change in internal volume by 12.0 x 10-6 m3 when filled with a liquid at a pressure p. If E = 200GN/m2 and v = 0.25, and assuming rigid end plates, determine the values of hoop stress
The two pistons at the ends of the cylinder gradually increase the air pressure. The circumferential stress in the cylinder must not exceed 3.8 MPa. What is the maximum air pressure (in MPa) that can be maintained in the cylinder? Express your response using three significant digits. GOʻGG 50 mm Cylinder wall thickness: 3 mm
2. The tank shown in the figure is fabricated from 10 mm steel plate. Determine the maximum longitudinal and circumferential stress caused by an internal pressure of 1.2 MPa. 400mm 600 mm
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 20 mm. The diameter of the pressure vessel is 450 mm, and its length is 2.0 m. Determine the maximum internal pressure that can be applied if the longitudinal stress is limited to 140 MPa, and the circumferential stress is limited to 60 MPa.
The 2-meter-high pressure tank below contains gas with internal pressure of 2 MPa. It is subjected to an external load of 15 kN as shown. Calculate the maximum circumferential and longitudinal stresses (in MPa) experienced by the tank. The thickness of the tank is 30 mm. 175 cm 60cm 115 KN Ø '15 KN
The pressure tank shown is fabricated from 1/8-in steelplate. Calculate the allowable internal pressure if thecircumferential and longitudinal stresses are limited to20 ksi and 10 ksi, respectively.Answer: p= ___________________
Engineer firms in many situations must verify the reliability of existing purchased designs. Your role as a quality engineer at an oil refinery is to confirm the maximum stresses imposed by a 1.03 MPa propane pressure inside the 20-lb design cylinder shown in Figure.3(a), at 25°C, which acts as a pressurized cylinder once the gate valve is closed. If the cylinder is made of 2.5-mm-thick steel and can be approximated as shown in Figure.3(c). Evaluate the maximum longitudinal and hoop stresses. 308 mm OL H 447 mm B (b)