A spring subjected to torsional stress is made of hard-drawn brass wire. The ultimate strength in tension is 75,000 psi and the yield stress 26,000 psi. The modulus of elasticity is 14,000,000 psi. The load on the spring varies rapidly from 75 to 100 lb. What is the permissible design stress if the load is applied with minor shock? i ' ,

A spring subjected to torsional stress is made of hard-drawn brass wire. The ultimate strength in tension is 75,000 psi and the yield stress 26,000 psi. The modulus of elasticity is 14,000,000 psi. The load on the spring varies rapidly from 75 to 100 lb. What is the permissible design stress if the load is applied with minor shock? i ' ,

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.2.9P: A safety valve on the top of a tank containing steam under pressure p has a discharge hole of...

See similar textbooks

Similar questions

A hard-drawn steel wire extension spring has a spring index Of 7.5, hook radii of r = 0.106 in and r2 0.089 in, and an initial tension of 1.5 lbf. The number of body turns is 13.5 and the uncorrected initial stress is 16.5 kpsi. From the given information: (a) Determine the physical parameters of the spring. (b) Find all stresses at ends A and B and the body torsion under the static load of 6 Ibf.
(10) A weight of 270kg falls a distance of 1.0m & strikes a coil compression spring which absorbs the blow with a deflection of 0.3m. The mean diameter of the coils is to be 8x the wire diameter. If the allowable stress is 415MPa & the modulus of rigidity is 80GPa, find the diameter of the wire & the number of effective coils required.
Two coaxial closed coil springs make up a standard compound helical spring. When both springs are unloaded, they are not of equal length. If each spring's working stress is to be the same. The wire material has an 80 GPa modulus of rigidity. Find the diameter of steel wire for inner spring and stiffness of inner spring. Also find the stiffness of the compound spring. Outer spring a: Mean coil diameter = 100 mm No. of turns = 15 Wire diameter = 12.5 mm Inner spring b: mean coil diameter = 75 mm No. of turns = 20
A close-coiled helical spring is subjected to an axial pull of 600 N. The spring is made out of a 16 mm diameter rod, and has 12 complete coils, each of mean diameter 120 mm. Compute shear stress induced in the rod and the deflection under the pull. Take G = 0.85 x 105 N/mm^2.
A machinery uses a helical tension spring with wire diameter of 3 mm and coil outside diameter of 35 mm. The spring has 9 total coils. The design shear stress is 500 MPa and the modulus of rigidity is 82 GPa. Determine the force that causes the body of the spring to its shear stress in N. Consider ground ends.
A torque of magnitude T= 25,000 lb-in is applied to the end of a tank containing compressed air under a pressure (p) of 20 psi. The tank has a 20" inner diameter and a 0.2" wall thickness. The material yield stress (Sy) is 3,000 psi. Consider maximum stress conditions for the pressure vessel analysis. The cross section of the tank has the following geometric properties: A = 12.7 in² and J = 1294 inª. (a) Considering only the internal pressure of 20 psi., determine the equivalent stress using the distortional energy theory. (b) Under both the applied torque and internal pressure loading, determine the factor of safety to the tank according to the distortional energy theory.
A composite spring has two closed coiled springs connected in series, each spring has 12 coils at a mean diameter of 25mm. Find the wire diameter for one if the other is of 2.5mm diameter and the stiffness of the composite spring is 700N/m. Estimate the greatest load that can be carried by the composite spring, and the corresponding extension, for a maximum shear stress of 180MPa. Take G=80GPa.
Difficulty (3/5) Dimensions: a b 44 in 0.033 in segure and-cap effects 1900 Problem Statement: A cylindrical pressure vessel with dimensions given carries an internal pressure of 21 psi. Find the axial stress and the hoop stress induced in the wall of the vessel Answers: Oheep" be sure to include units with your answers
A closed coil vertical spring-loaded valve is required for a compressed air receiver. The valve is to start opening at a pressure of 1 MPa and must be fully open with a lift of 4 mm at a pressure of 1.2 MPa. The diameter of the port is 25 mm. Assume the allowable shear stress in steel as 480 MPa and shear modulus as 80 GPa. Design a suitable close coiled round section helical spring having squared ground ends. Also specify initial compression and free length of the spring
A link of a valve gear has to be curved in one plane, for the sake of clearance. Estimate the maximum tensile and compressive stress in the link if the thrust is 2500 N. (Cam bridge) ANSWER: maximum tensile 38.0 MN/m2; maximum compressive 46.0 MNIm2. Please show the solution to get the answer.
The ultimate stress for the hitch ball is 60,000 ksi. (Capacity) The advertisement information is listed in the photos. 1) What is the maximum shear stress? (Demand) (Note you'll need to use half circle for Q) 2) What is the demand capacity stress ratio? V POWER TORQUE. PTWO011 HITCH BALL BOLA DE ENGANCHE 2" BALL DIAMETER 6000 LB. RATING 3-1/4" SHANK LENGTH PTWO011 POWER TORQUE. HITCH BALL BOLA DE ENGANCHE 1" SHANK DIAMETER
A simple torsion-bar spring is shown. The shear stress in the steel [G = 11,500 ksi] shaft is not to exceed 10000 psi, and the vertical deflection of joint D is not to exceed 0.650 in. when a load of P = 4500 lb is applied. Neglect the bending of the shaft and assume that the bearing at Callows the shaft to rotate freely. Determine the minimum diameter required for the shaft. Use dimensions of a = 84 in., b = 36 in., and c = 34 in. Answer: d= i a D P B in. b C