A spherical water tank with an inner radius of 11 meters has its lowest point 3 meters above the ground. Water is pumped from ground level through an inflow pipe that meets the tank at its lowest point (see figure). Neglecting the volume of the inflow pipe, how much work is required to fill the tank if it is initially empty? Use 1000 kg/m³ for the density of water and 9.8 m/s² for the acceleration due to gravity. C TO dy (Type exact answers, using as needed.) 11 m inflow pipe 3 m Set up the integral that gives the work (in joules) required to fill the tank. Use a vertical axis whose origin corresponds with the center of the sphere and use increasing limits of integration.

A spherical water tank with an inner radius of 11 meters has its lowest point 3 meters above the ground. Water is pumped from ground level through an inflow pipe that meets the tank at its lowest point (see figure). Neglecting the volume of the inflow pipe, how much work is required to fill the tank if it is initially empty? Use 1000 kg/m³ for the density of water and 9.8 m/s² for the acceleration due to gravity. C TO dy (Type exact answers, using as needed.) 11 m inflow pipe 3 m Set up the integral that gives the work (in joules) required to fill the tank. Use a vertical axis whose origin corresponds with the center of the sphere and use increasing limits of integration.

Name: A spherical water tank with an inner radius of 11 meters has its lowe
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A spherical water tank with an inner radius of 11 meters has its lowest point 3 meters above the ground. Water is pumped fromground level through an inflow pipe that meets the tank at its lowest point (see figure). Neglecting the volume of the inflo

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A tank full of cooking oil has the shape of a paraboloid obtained by rotating a parabola about the vertical axis, such that the tank height is 4 m and the radius at its top is 4 m, see the figure below. a. How much work is required to empty the tank through an 2-m-high outlet pipe at the top of the tank? (The density of the oil is 920 kg/m3 .) b. When a 4,000,000 J of work is done, what is the depth of oil remaining in the tank? 4 m 2 m 4 m
For the system shown in the Figure, Reservoir I has a water depth of 7 m and Reservoir 2 has a water depth of 8 m. The bottom of Reservoir 2 is at an etevation of 20 m above the bottom of Reservoir 1. The pump is required to deliver 400 1/s of water from Reservoir I to Reservoir 2. Given that the total energy loss in the system is 5 J/N, how much power must the pump deliver? Give your answer in kW to one decimal place. Reservoir 2 pump Reservoir 1 Power (kW) Round your answer to I decimal place
Help me please
The cylindrical in the figure is filled with 31.4 m3 of water at t = 0. The radius of the tank is 1 m and its height is 10 m. There is an outlet line with a radius of 0.2 m at the bottom of the tank. a. What is the time required for half of the water in the tank to drain after the outlet line is opened?b. The flow velocity of water from the bottom of a water tank is related to the height of the water in the tank, and this relation is v² = 2gh where v: (m / s) linear flow velocity, g: gravitational acceleration (10 m / s2) and h: (m) height.
115 m turbine 2 In the above example problem, a hydroelectric turbine at the base of a dam is shown schematically. The height of the water above the turbine station given as 115 m. This turbine produces 4.6 MW of electricity, and you may assume the losses in the system to be equivalent to 10 m of head of water. The diameter of the pipe at the turbine exit is 0.75 m, and the velocity of water exiting from the pipe is 12.5 m/s. Caleulate the efficiency of the turbine.
A cylindrical tank with a radius of 3ft is filled with water which has a weight density of 62.4 lb/ft^3. The water is to be pumped to a point 2ft above the top of the tank. (a) How much work is performed in pumping all the water from the tank? (B) How much work is performed in pumping 3ft of water from the tank? (C) At what point is 1/2 of the total work done?
Q1: The figure show a pump drawing water from a reservoir at point 1 and discharging it into another reservoir at point 2 through pipe its length is 100 m. If the discharge is 120 L/min and the power of the pump is 590 kW determine the diameter of pipe where friction factor of the pipe is 0.00807, density of water 1000 kg/m³. 30 m Pump
A spherical tank with radius 3 m is half full of a liquid that has a density of 900 kg/m³. The tank has a 1 m spout at the top. Find the work W required to pump the liquid out of the spout. (Use 9.8 m/s² for g.) W = J h
5. The Water is flowing through a pipe having diameter 360 mm and 216 mm at the bottom and upper end respectively. The intensity of pressure at the bottom end is 25.85 N/cm2 and the pressure at the upper end is 11.6325 N/cm2 & the rate of flow through the pipe is 55 lit/s. Draw a neat diagram and determine the following: 1.Velocity of flow at bottom of the pipe in m/s. 2. Velocity of flow at top of the pipe in m/s. 3. The difference in datum head between top & bottom in meter of water. 4. The difference of velocity head between the top to bottom end in meter of water. 5. The pressure head at the bottom in meter of water.
Containers A and B containing real fluid are combined like. While the difference of water levels of the reservoirs is h = ab (m); i-) Find the flow rate of the water passing from chamber A to chamber B. ii-) Draw the Energy and Piezometer lines of the system. g = 9.81 m / s
A hemispherical tank of radius 3m is filled with 4500 liters of water. Find the time it will take to empty the tank when the water is pumped out to the top of the tank using a pump with 10kW power. O Zoom image 5.12hours ↓ 16.24hours 11.46hours 4.11hours
A closed vessel contains water up to a height of 2 m and over the water surface there is air having pressure 8.829 N/cm^2 above atmospher. At the bottom of the vessel there is an orifice of diameter of 15 cm. Find the rate of flow of water from orifice. Take Cd=0.60.