rc A simply supported one way reinforced concrete slab has a thickness of 175 mm. It is reinforced with 16 mm Øspaced at 200 mm on center.f. = 21 MPa and f, = 275MPA. Clear concrete cover is 20 mm. Weight ofconcrete is 23.5 kN/m³. Compute the nominal moment capacity (kN-m).Select one:а. 51.3b. 47.2С. 38.5d. 24.6 Determine the location of the neutral axis from the top of the beam. M=250 k-ft and n=9.Area for each bar: A#8 =cracked member.0.79in²,A#101.27in?. Use transformed area method and assume4 #828"224 #103"18"Select one:а. 5.28 inb. 6.17 inC. 7.61 ind. 8.52 in

Answered: Image /qna-images/answer/2c8b9349-0b0b-4f46-b5ae-f203856412b2.jpg

A simply supported one way reinforced concrete slab has a thickness of 175 mm. It is reinforced with 16 mm Ø spaced at 200 mm on center.f = 21 MPa and fy = 275MPA. Clear concrete cover is 20 mm. Weight of concrete is 23.5 kN/m³. Compute the nominal moment capacity (kN-m). Select one: О a. 51.3 b. 47.2 C. 38.5 d. 24.6

A simply supported one way reinforced concrete slab has a thickness of 175 mm. It is reinforced with 16 mm Ø spaced at 200 mm on center.f = 21 MPa and fy = 275MPA. Clear concrete cover is 20 mm. Weight of concrete is 23.5 kN/m³. Compute the nominal moment capacity (kN-m). Select one: О a. 51.3 b. 47.2 C. 38.5 d. 24.6

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

2. A reinforced concrete rectangular beam has a width of 300 mm and an effective depth to bottom bars of 450 mm. The beam is reinforced with six 32-mm bottom bars and two 28-mm top bars located 65 mm from the top of the beam. Concrete strength fc= 34,5 MPa and steel strength fy 345 MPa. Calculate the ultimate moment capacity of the beam. Use 2015 NSCP. Answer: ØMn = 556 kN – m %3D nitu ef t heee th
A reinforced concrete beam has a width of 425mm and an effectivedepth of 900mm. The longitudinal bars at compression side are 4-25mm dia. and 2layers of 4-32mm dia. at tension side. Concrete strength f’c=27.60 MPa and fy=420.4) Calculate the Transformed moment of Inertia.5) Calculate the moment capacity of the section.6) Calculate for the safest uniform load that can carry by the beam if ihas a lengthof 10m.
60KN A ANALYZE THE STRUCTURE USING PORTAL FRAME METHOD Compute: 1. Axial Load of AD 2. Moment at Support B 3. Moment of Member EF at E Show Complete Solution B 7m E 5m LL F 8m
A rectangular beam has the following properties: fc'=28MPa fy=270MPa b=300mm d=450mm As=4 of 36mm diameter bars Compute For: 1.) The depth of the concrete stress block is Blank 1 mm. 2.) The magnitude of the nominal moment capacity is Blank 1 kN.m
ANALYZE THE STRUCTURE USING PORTAL FRAME METHOD. COMPUTE: AXIAL LOAD OF AD MINT ALL Onc MOMENT AT SUPPORT B MOMENT OF MEMBER EF ATE P E GOKN A 7m B 5m 8m
SITUATIONI A rectangular reinforced concrete beam, 5 m long is carrying a dead load of 18 kN/m and a live load of 35 kN/m using f'c = 415 MPa. The beam has a width of 21 MPa using fy = 300 mm and an effective depth of 400 mm. Compression reinforcement will be placed at a depth of 60 mm from the utmost compression concrete.
From the given figure below, determine the maximum flexural stress of the beam if it has a cross section of 150mm wide by 250mm deep. (JN 10 N/m o' RA=42N 42N 3M B IM 75Nm 81NM Im RD=3N -3N 0° 78 Nm 3NM V-DIAG M-DIAG
A reinforced concrete T-beam has an effective flange width of 750mm with a slab thickness of 100 mm. The effective depth is 750 mm and the width of web is 350 mm. The beam is reinforced with 6325 sq mm of steel with fy = 345 Mpa. Assuming f'c = 20.7 Mpa, calculate the ultimate moment сарacity. %3D
01// An interior Two-way slab panel 6.0 m * 7.2m carry a live load 10 kN/m². The slab thickness is 200 mm and it is supported on beam 300 mm width and 900mm depth. Assume that the super imposed dead load equal to 3 kN/m². Determine the principal bending in short direction of the slab and design the panel for max positive moment in the short direction (assume Ø 10mm). Use f = 21 MPa and fy = 420 MPa 6 m Interior Panel —ilmatbea Fig.1 Sum in Figura
Three pulleys are joined by solid steel shafts AB and BC. If G = 200 GPa, determine the unit shearing stress in shafts BC. In MPa A 25 mm ara B 450 N-m 1.2 m 1300N-m 38 mm dia 1.80 m 900 N-m
A reinforced concrete T- beam has an effective flange width of 750mm with a slab thickness of 100mm. The effective depth is 750mm and the width of web is 350mm. The beam is reinforced with 6325 sq.mm. of steel with fy = 345 MPa. Assuming fc'= 20.7MPA, calculate the ultimate moment capacity. If fc'= 42 MPa, solve for B1. 0.65 O 0.75 0.85 None of the above
A reinforced concrete rectangular beam has a width of 300 mm and an effective depth to bottom bars of 450 mm. The beam is reinforced with six 32-mm bottom bars and two 28-mm top bars located 65 mm from the top of the beam. Concrete strength fc = 34.5 MPa and steel strength fy = 345 MPa. Calculate the ultimate moment capacity of the beam.