A partition separating a chamber into two compartments is removed. The first compartment initially contains oxygen at 600 kPa and 100 °C; the second compartment initially contains nitrogen at the same pressure and temperature. The oxygen compartment volume is twice that of the compartment containing nitrogen. The chamber is isolated from the surroundings. Determine the change of entropy associated with the mixing of the 02 and N2. HINT: Assume that the process is isothermal.

A partition separating a chamber into two compartments is removed. The first compartment initially contains oxygen at 600 kPa and 100 °C; the second compartment initially contains nitrogen at the same pressure and temperature. The oxygen compartment volume is twice that of the compartment containing nitrogen. The chamber is isolated from the surroundings. Determine the change of entropy associated with the mixing of the 02 and N2. HINT: Assume that the process is isothermal.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

At 1.2 Mpa, a mixture of saturated steam and liquid water exists in equilibrium.If the specific enthalpy of the mixture is 1700 kJ/kg. Determine the temperature ofmixture. Calculate the quality of steam, percent moisture content of the mixture,specific volume, specific internal energy and specific entropy.
Tank A contains 42 moles of carbon dioxide at 77 ⁰C and 70 kPa. Tank B contains 8 kg of the same gas at 27 ⁰C and 120 kPa. The valve is opened, and the gases are allowed to mix. The heat transfer from the surroundings. The final equilibrium temperature is 42 ⁰C. Using ideal gas equation, determine:
4. (a) Two tanks (A and B) are connected by a valve. Tank A is insulated and contains 1 kg of oxygen at 15°C and 300 kPa. Tank B is uninsulated and of 2m' volume. It contains nitrogen at 50°C and 500 kPa. The valve is opened and the two gases are mixed to form a uniform mixture at 25°C. Determine (i) the final pressure in the tank, (ii) the heat transfer, and (iii) the entropy generated during this process. nd dilated... munifor mixe ara t
Hydrogen is mixed with oxygen in an adiabatic mixing chamber at 100 kPa, 25 ∘C. The flow rate of hydrogen is 4 kmol/s and that of oxygen is 1 kmol/s. The mixture leaves the chamber at 100 kPa. Assume no chemical reaction and use the PG mixture model. Part A Determine the temperature at the exit (T2). Express your answer to three significant figures. Part B Determine the rate of entropy generation (S˙gen) in the device. Express your answer to four significant figures in kW/K.
17.pdf A tank with a volume of 3 m³ is filled with helium at 45°C and 230 kPa is connected through a valve to anothen tank containing 4.4 kg of helium at 90°C and 260 kPa. Now the valve is opened, and the entire system. If the final temperature of the entire system is 20°C, determine the volume of the second tank and the final equilibrium pressure of the helium.
Saturated water vapor at 200.111 oC is isothermally condensed to a saturated liquid in a piston-cylinder device. Calculate (d) change of entropy, and (e) change of enthalpy.
How much entropy in KJ?K is transferred to 20kg of helium at 20°C if the temperature is increased by 28°C. The pressure is remained constant.
9. Carbon Dioxide and Oxygen is placed each inside a 1m3 tank separated by an isolation valve. Initially, Carbon dioxide has the following properties: P = 20kPag & T = 25°C and that Oxygen has the following properties: P = 30kPag & T = 75°C. If heat is being prevented to escape in the outside surroundings, determine the resulting temperature of the mixture if it is found that after opening the isolation valve, the resulting pressure on both tank is 25kPag. Draw a figure or FBD that will support the problem. Explain each step by step formula.
At 250°C a mixture of saturated steam and liquid water exists in equilibrium. If the specific volume of the mixture is 0.04159 m3/kg, calculate the following: (a) percent moisture (b) enthalpy (c) entropy.
Steam at a pressure of 3.5 MPa is known to have a specific volume of 50×10*-3 m*3/kg. Find the enthalpy of the mixture ink KJ/s if the mass flow rate of the steam is 3.443 kg/s.
A mixture of ideal gases consists of 3 Kg of Ammonia and 5 kg of carbon dioxide at a pressure of 300 Kpa and a temperature of 20 °C. If the mixture is heated at constant volume to 40°C,Find: a) the change in internal energy, enthalpy, and entropy of the mixture if the heating is done at constant pressure.
On a hot summer day, you decide to make some iced tea. First, you brew 1.50 L of hot tea and leave it to steep until it has reached a temperature of Ttea = 75.0 ∘C. You then add 0.975 kg of ice taken from the freezer at a temperature of Tice = 0 ∘C. By the time the mix reaches equilibrium, all of the ice has melted. What is the final temperature Tf of the mixture? For the purposes of this problem, assume that the tea has the same thermodynamic properties as plain water. The specific heat of water is c = 4190 J/kg⋅∘C The heat of fusion of ice is Lf = 3.33×105 J/kg The density of the tea is ρ tea = 1.00 kg/L