A large water pump takes water from a nearby lake at a rate of35 f/Sec and rauses its pressure from 7 to 100 psia, with anegligiblymall change in the speific ntermal energy iand the density,So that if can be fed into an rngahon Systemo if the pump isGadiabatic and frictionless, delermine the magnitude of the powernecessary to drive the pump in hp using 5 signifigant figures.Hint: you need to use an equation for h.

Given that, Flow rate of water, Q=35 ft3/sec,Pressure at the inlet of pipe, Pin=17 psiaPressure at…

A large water pump takes water from a nearby lake at a rate of 35 f/Sec and rauses its pressure from 17 to 100 psia, with a negligiblymall change in the specific intemal energy and the density, o that if can be fed into an irngahion System. If the pump is adiabatic and frictionless, delermine the magnitude of the power necessary to drive the pump in hp. sing 5 signikgant figures/ Hint: need to use an equation for h. you

A large water pump takes water from a nearby lake at a rate of 35 f/Sec and rauses its pressure from 17 to 100 psia, with a negligiblymall change in the specific intemal energy and the density, o that if can be fed into an irngahion System. If the pump is adiabatic and frictionless, delermine the magnitude of the power necessary to drive the pump in hp. sing 5 signikgant figures/ Hint: need to use an equation for h. you

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter40: Typical Operating Conditions

Section: Chapter Questions

Problem 10RQ: The seasonal energy efficiency ratio (SEER) includes the energy used in the _____and _____cycles.

See similar textbooks

Similar questions

A boiler feed pump operates at 40oC suction. If pump efficiency is 85% and needs 20 kW power of motor needed to drive the pump, find the maximum pressure of the boiler could attain for a mass of 2 kg/s.
A forced draft fan is used to provide the combustion air requirements for a boiler that burns coal at the rate of 10 metric tons per hour. The air requirements are 100,000m3/hr , air is being provided under 150 mm water gage by a fan which has a mechanical efficiency of 60%. Find the size of the driving motor in kW
A pipa transports gas up a hill. At the bottom of the hill, the maan valocity in the pipe is 10 m/sand the pressure is 200 Pa. The pipe lis then rals 10 m to the top of the hill, where the pressure is now measurad to be 30 Pa. Find the valocity at the top of the hiIL The density of the gas is 1.1 kg/m, and the acceleration dua to gravity is 3.81 m/s". P2 = 50 Pa U2 = ??? P, = 200 Pa Ah =10 m U1 = 10 m/s O. 9.53 m/s O b. 19.07 m/s O. 4.84 m/s O d. 13.29 m/s 177 m/s
Find the annual electricity cost based on the annual operating time of the pump system, which is (ÖN+5)*500 hours and theelectricity price of 4 TL/kWeh ÖN=5
Q2: Use dinensional analysis to derive as epresion for the power develaped by an engine in terms of the torpue T and roarive sped u.
1. A centrifugal pump has external and internal diameters of 300 mm and 150 mm respectively. The vane angles of inlct and outlet are 25 and 30° and the pump runs at 1450 r.p.m, If the velocity of flow through the pump is constant, find the work done per kN of water. (Ans. 20-2 kJ)
Q1: Find the pump efficiency if the pressure difference across the pump is 230 kPa. If the outlet 2₁ 14 cm Z2 diameter of the pump is 7 cm, the inlet diameter is twice the outlet diameter. take the mass flow = 50 rate of the pump is equal to 50 kg/s 72. 1 Wate C the pump nmotor = 85 % Motor 20 W
A 650 bhp Diesel Engine with 6 cylinders has a brake thermal efficiency of 36 % and a jacketwater loss of 27%. It uses a closed cooling system with a cooling tower 10 meters high. Thetemperature rise after passing the water jacket is 12 °C and the cooling tower range is 5 °C. Make asketch showing the vital parts of the cooling tower system and calculate:a) capacity of the jacket water pump in GPMb) exhaust loss if the friction, radiation and other losses total 8%.c) cooling water flow rate in the cooling tower in liter/hrd) standard size electric motor to drive the raw water pump if the total dynamic head is 35 meters and the pump efficiency is 84%
Carnot engine absorbs 300 J of heat from a reservoir at the temperature 373.15 K and rejects heat to a reservoir at the temperature of the triple point of water ( T2 = 273.16 K ) Find the heat rejected, the work done by the engine and the thermal efficiency.
A pump discharges 50 tons of water per hour to a height of 8 m, overall efficiency of the pumping system being 69%, what is the input and output power?
A petrolengine has mechanical efficiency 0.8 and lower calorific value of ispoots 44.2 MJ/kg. The engine bore 0.06 m and stroke of 0.08 m. The engine speed of 2000 rom. The consumption of fuel about 8 liter/h and the brake welght is 200N. Take the density of fuel as 750 kg Im3 and torque arm of A00 mm Find the specific fuel consumption.
Find the thermal efficiency of the system in percentage to 2.d.p.