4... A horizontal section of steel tubing is 125 meters long and 30mm indiameter. This piece of tubing connects two components in a hydraulic system.This system uses a heavy oil with a Sg of 95 and a Kinematic Viscosity of 35cS.The oil has a volume flow rate of 10 liters per minute. There are 2 pressure gaugesconnected to this tubing, one at the start and one at the end of the length of pipe. Ifthe pressure gauge at the start reads 1000Kpa, what does the other gauge read in4.KPa?

Answered: Image /qna-images/answer/16c26d47-df03-4fa0-9e13-b6534f7b7332.jpg

A horizontal section of steel tubing is 125 meters long and 30mm in diameter. This piece of tubing connects two components in a hydraulic system. This system uses a heavy oil with a Sg of 95 and a Kinematic Viscosity of 35eS. The oil has a volume flow rate of 10 liters per minute. There are 2 pressure gauges connected to this tubing, one at the start and one at the end of the length of pipe. If 4. the pressure gauge at the start reads 1000Kpa, what does the other gauge read in KPa?

A horizontal section of steel tubing is 125 meters long and 30mm in diameter. This piece of tubing connects two components in a hydraulic system. This system uses a heavy oil with a Sg of 95 and a Kinematic Viscosity of 35eS. The oil has a volume flow rate of 10 liters per minute. There are 2 pressure gauges connected to this tubing, one at the start and one at the end of the length of pipe. If 4. the pressure gauge at the start reads 1000Kpa, what does the other gauge read in KPa?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An inclined pipe of 4-inch ID is used to transport a viscous oil from one open-top container A to another open-top container B. The specific gravity of the oil is 0.9 and the viscosity of the oil is 20 cp. The length of the pipe is 100 ft. Oil levels in these two containers are shallow and the inlet and outlet pressures across the tube can be assumed to be identical – both 1 atm. What is the angle needed to maintain a flow rate of oil of 1 cuft / second? The levels of oil in A and B do not change – oil is continually added to A at the rate of 1 cuft / second and is continuously removed from B at the same rate. A
What is the principle involved in measuring Kinematic and Dynamic viscosity of oil using Saybolt viscosity? How is falling of sphere method differ from Saybolt Universal viscosimeter?
B1. A water with viscosity 11.4x10-3 poise is flowing through a pipe of diameter 300 mm at the rate of 500 litres per sec. Find the Reynold's Number & the head lost due to friction in the pipe of length 1 km. (Enter only the values by referring the unit given. Also upload the hand written answers in the link provided) The velocity of flow of water (in m/s) is The value of Reynold's Number is The frictional loss in the pipe (in m) is
Give some examples of Other Pressure Measurement Devices?
The picture below depicts a system for delivering chocolate ganache in liquid form. Thenozzle on the end of the hose requires 140 kPa of pressure to operate effectively. Thehose is smooth plastic with an ID of 25 mm. The chocolate has a specific gravity of 1.1and a dynamic viscosity of 2.0 X 10-3 Pa*s. If the length of the hose is 85 m and there is a change in height of 10 m, determine(a) the power delivered by the pump to the ganache and(b) the pressure at the outlet of the pump.Neglect the energy losses on the suction side of the pump. The flow rate is 85 L/min.
In the figure shown below, an open manometer is connected to a pipe to measure the pressure at A. Fluid at A is oil of s.g. oil = 0.85 , the value of (x = 334 mm) and the value of ( y = 400 mm) to obtain the pressure intensity as gauge pressure as well as absolute pressure. Take Patm = 1.01396 bar , and the manometer fluid s.g. Hg=13.6 2-Gage pressure at A (PAgage) is equal to -----------? 1-Absolute pressure at A (PAabs) is equal to -----------?both answer in kN/m^2
the temperature of the fluid is measured in farenheit and kelvin. if both temperature has the same numerical readings, what is the temperature in rankine
Pitot tube is a flow rate measuring device which measures exactly the quantity of fluid flowing every second in a pipe. Select one: True False
HEATING UNIT THERMOMETER LIQUID BATH Fluid CONTAINER CORK 60 CC- RESERVOIR Figure 4: Schematic for SAYBOLT viscometer. a) Explain the operation procedures and constraints of the different viscometers especially the used one. b) Explain, with examples, the effects of temperature and shear forces on theNewtonian and non-Newtonian fluids. c) Illustrate the results of the viscosity test of the above motor oil then f it the viscosity function of temperature to the following logarithmic quadratic correlation as described below. Find the values for the constants a, b, and c. Takeu at T = 0°C. То + c T 10 In- = a + b Mo T d) What is the viscosity of the used above equation motor oil at 280 K, 305 K and 3 20 K? You can use the
Ql:- A 80 mm diameter of pipes and 300 mm long slides by its own weight of 1.7 kN inside a large cylinder of 80.2 diameter. The clearance between the eylinder and pipe is filled with oil of 5 stokes viscosity and s.g 0.92, find the velocity of sliding the pipe.
Q1: Calculate the dynamic viscosity of an oil, which is used for lubrication between a rectangular plate of size 0.75m x 0.55 m and an inclined plane with angle of inclination 45' as shown in figure 1. The weight of the rectangular plate is 0.5 kN and it slides down the inclined plane with a uniform velocity of 0.35 m/s. The thickness of oil film is 1.75 mm. Then, state the scope for this obtained viscosity? Recangdar plabe -oil Inclined plane Figure 1
Toplam basınç göstergesi Manometre Vana Venturimetre Debiölçer Hazne Pompa Manometre=Manometer Venturimetre=Venturimeter Debiölser-Flaw meter Vana=Valve Pompa=Pump Hazne=Tank Toplam Basınç Göstergesi =Total Pressure Gauge It is desired to display the flow in the venturimeter, How can you determine this? Explain bY. explaining the method vou bave chosen.