A body having a cylindrical shape of length equals to 1.9 m and diameter equals to 400 mm is inside a room where the ambient temperature is equal to 300 K. The initial temperature of the body is equal to 350 K. If the heat convective coefficient is equal to 4.2 W/m^2.K. What condition should the thermal conductivity k verify in order to apply the lumped capacitance method. Select one: O a. k is less than 4.2 W/m.K O b. k is greater than 1.6 W/m.K O c. k is greater than 3.8 W/m.K O d. k is less than 2.1 W/m.K

A body having a cylindrical shape of length equals to 1.9 m and diameter equals to 400 mm is inside a room where the ambient temperature is equal to 300 K. The initial temperature of the body is equal to 350 K. If the heat convective coefficient is equal to 4.2 W/m^2.K. What condition should the thermal conductivity k verify in order to apply the lumped capacitance method. Select one: O a. k is less than 4.2 W/m.K O b. k is greater than 1.6 W/m.K O c. k is greater than 3.8 W/m.K O d. k is less than 2.1 W/m.K

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.23P

See similar textbooks

Similar questions

under steady-state conditions. If you are given T1 = 200 °C and T2 = 164 °C, determine: a) the conduction heat flux, q,.cond, in m2 W from x = 0 to x = L b) if the dimensions of the triangle ares 15 mm and h 13 mm, calculate the heat transfer due to convection, q,y, in W at x = L Finsulation T2 T T = 20°C h = 500 W/m2.K Triangular Prism x L x 0 L= 50 mm k = 100 W/m-K
For each of the following cases, determine an appropriate characteristic length Lc and the corresponding Biot Bi number that is associated with the transient thermal response of the solid object. Say if the global capacitance approximation is va lid. If temperature information is not provided, evaluate properties T = 300K a)oroidal shape with diameter D = 50mm and cross-sectional area AC = 5 mm², with thermal conductivity k = 2.3W / (mK) The surface of the toroid is exposed to a refrigerant corresponding to a convective coefficient eta = 50 W/( m2.k) b)A long stainless steel heated bar (AISI 304), with rectangular cross section, and dimensions w = 3mm , W = 5mm and L = 100mm . the bar issubjected to a refrigerant that provides a heat transfer coefficient of h =15 W/(m2 K) on all exposed surfaces. c)A long extruded aluminum tube (2024 Alloy) with internal dimensions and external w = 20 mm and W = 24 mm , respectively, suddenly submerged in water, with a convective coefficient of h =…
Q2/ An aluminum sphere weighting 7kg and initially at a temperature of 533K is suddenly immersed in a fluid at 283K. if heat transfer coefficient between the sphere and fluid is 50W/m?.°C. Take density=2707kg/m3, specific heat=0.9KJ/kg.ºC and thermal conductivity= 204W/m°C. Determine th Bi number and And determine the time required to cool sphere to 263k
A wall of a house is made from two layers of bricks enclosing a layer of insulation. A radiator is positioned to cover the whole internal surface, and used intermittently when the internal temperature is low. The external surface is exposed to the outside air. Which of the following assumptions could be used to identify the relevant reduced form of the conduction equation to find the temperature in the wall. a. Conduction is mainly in two directions. b. Conduction is mainly in one direction. c. The wall properties are homogeneous. d. Steady conditions exist. e. Unsteady conditions exist. f. There is an internal volumetric heat generation in the wall.
Problem 4 A cork board (k = 0.039W/m K) 3 cm thick is exposed to air with an average temperature T.. = 30°C with a convection heat transfer coefficient, h = 25 W/m².K. The other surface of the board is held at a constant temperature of 15°C. A volumetric heat generation of 5 W/m³ is occurring inside the wall. Assuming one dimensional conduction, write the governing equation and express the boundary conditions for the wall. (solve the equation is not required) Problom
3. A cylindrical pipe of negligible thickness holding a hot fluid at 140°C and having an outer diameter of 0.4 m is insulated with three layers of each 50 mm thick insulation of k₁ = 0.02: k2 = 0.06 and k3 = 0.16 W/m-K (starting from inside). The outside surface temperature is 30°C. Solve for the value of T2 (°C). • show conversions, units, and box in your final answers
A large 100-mm thick steel plate is initially at uniform temperature T = 180°C at time t = 0. Both sides of the plate are exposed to 30°C oil with convection coefficient h = 1500 W/m².K. The thermal conductivity, heat capacity, and density of the steel are k = 38 W/m-K, cp = 485 J/kg-K, and p = 7800 kg/m³. a) Find the temperature at the center of the slab when t = 125 s. b) Find the temperature at the surface of the slab when t=125 s.
A hollow cylindrical copper conductor 1.27cm. i.d. and 5.1cm. o.d. carries a current density 5000 amp/cm². For copper K = .38 kW/m°K and electrical resistivity = 2 x 10-6 ohm cm. Find the position and magnitude of the maximum temperature and the internal and external heat removal when (a) the outside temperature is 37.8°c and no heat removal occurs on the inside and (b) the outside is at 37.6°C and the inside at 27.2°C.
1.19 A square isothermal chip is of width w = front surface is exposed to the flow of a coolant at T = 15°C. From reliability considerations, the chip temperature must not exceed T = 85°C. 5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the Coolant Chip If the coolant is air and the corresponding convection coefficient is h = 200 W/m² · K, what is the maximum allowable chip power? If the coolant is a dielectric liquid for which h = 3000 W/m² · K, what is the maximum allowable power?
In 2012, a new fiber-optic cable of handling 40,000 telephone calls simultaneously was laid under the Pacific Ocean from California to Japan, a distance of 13,300 km. The cable was unreeled from shipboard at a mean temperature of 22oC and dropped to the Ocean floor having a mean temperature of 5oC. The coefficient of linear expansion of the cable is 75×10-6 /degree celsius. Determine the length of cable that must be carried on the ship to span the 13,300 Km. Also, find the percent change in length
A chromel–constantan thermocouple measuring the temperature of a fluid is connected by mistake with copper–constantan extension leads (such that the two constantan wires are connected together and the copper extension lead wire is connected to the chromel thermocouple wire). If the fluid temperature was actually 250 C and the junction between the thermocouple and extension leads was at 90 C, what e.m.f. would be measured at the open ends of the extension leads if the reference junction is maintained at 0 C? What fluid temperature would be deduced from this (assuming that the connection error was not known)?
1.19 A square isothermal chip is of width w = front surface is exposed to the flow of a coolant at To = 15°C. From reliability considerations, the chip temperature must not exceed T = 85°C. 5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the Coolant T, h Chip = 200 W/m2 · K, what is the maximum allowable chip power? If the coolant is a If the coolant is air and the corresponding convection coefficient is h dielectric liquid for which h = 3000 W/m² · K, what is the maximum allowable power?