2. The density of coffee beans is 561 kg/m³. A 5 grams of the coffee beans is mixed into . After a cup of x milliliters of water, where x = 250 the water has cooled to 20°, what is the density of the coffee and water? Use density of water at 1000 kg/m³.

2. The density of coffee beans is 561 kg/m³. A 5 grams of the coffee beans is mixed into . After a cup of x milliliters of water, where x = 250 the water has cooled to 20°, what is the density of the coffee and water? Use density of water at 1000 kg/m³.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

1. a) Find the mass of a tank of ethyl alcohol in units of kg if it weighs 3.6 kN and the specific weight in units of kN/m³ if the volume is 0.3m³. | b) A 3 mm diameter of straw is inserted into a pan of water at 30°C (y water at 30°C = 9.764 kN/m³, o = 0.0712 N/m). If the water in the straw rises to a height of 3.6 mm above the water surface in the pan, calculate the contact angle, 0. c) Determine the viscosity of the fluid between the shaft and brushing shown in Figure Qld if the shaft moves at 1.5m/s under a force of 70 N. The uniform radial gap between the brushing and shaft is 0.15 mm. 90 mm / diameter F-70 N 1.5 m/s 155 mm Figure Qld
A tank originally contains 380 liters of brineholding 450 g of dissolved salt. 8 liters/min ofbrine containing 3.75 g/L of salt enters the tankand the mixture assumed uniform leaves therate of 12 L/min. Determine the amount of saltafter 10 min.
Problem 1. (10 points) What is the mass in grams and the weight in dynes and in gram-force of 12 oz of salt? Local g is 31.66 ft/s. Problem 2. (20 points) A spherical tank with a radius of 3 ft is filled with fluid whose density is 650 kgm/m. Determine: a. Total volume of the fluid in ft b. Its mass in slugs and Ibm (Ibm is pound-mass) c. Its specific volume in ft/lbm d. Its specific weight in N/m where g=31.9 ft/s? Problem 3. (10 points) Determine the mass in kgm, and weight in Newton of the air contained in a room whose dimensions are 6m x 6m x 8m. Assume the density of the air is 0.72 lbm/ft and local gravity at 32.1 ft/s?. Problem 4. (10 points) The pressure at the bottom of a certain mountain is 965 mm-Hg and at the same time at the top of the mountain is 845 mm-Hg. Assuming the unit weight of air is equal to 12 N/m2, determine the height of the said mountain. Problem 5. (20 points) In the figure, if the atmospheric pressure is 101. 03 KPa and the pressure at the bottom of the…
Determine the value of h2 (in meters) in the figure below when h,=31.11 m and h3=71.86 m. Reduce to 2 decimal places. Oil S = 0.848 he h2 Water h3 hị Water
Suppose a brine contalning 0.2 kg of salt per liter runs into a tank initially filled with 500 L of water containing 5 kg of salt. The brine enters the tank at a rate of 5 L/min. The mixture, kept uniform by stirring, is flowing out at the rate of 5 L/min. Find the concentration, in kilograms per liter, of salt in the tank after 10 min.
The BOD left over is 10 mg/l and exerte is 180 mg/l at 25c in 8 days. Find BOD 5 as mg/l @ 20C. Assuming Ɵ = 1.05.
Situation 1-A 500 cubic-centimeter solid having a specific gravity of 2.05 is submerged in two-liquid interface tank. Part of the solid is in mercury (sg=13.6) and the other part in oil (sg = 0.81). 1.1 What part of the solid is in mercury? A. 8.2% B. 12.5% 1.2 What part of the solid is in oil? A. 87.5% B. 93.7% C. 9.7% D. 6.3% C. 90.3% D. 91.8% 1.3 If the liquid is all mercury, what part of the solid is in mercury? A. 23.36% C. 18.25% B. 15.07% D. 12.08%
4. A tank contains 150 gal of brine made by dissolving 60 pounds of salt in water. Salt water containing 1 pounds of salt per gallon runs in at the rate of 2 gal/min and the well-stirred mixture runs out at the rate of 3 gal/min. Find the amount of salt in the tank after 30 minutes.
Eight solid hemispherical blocks each of diameters 4 cm are dropped into a hemispherical vessel containing some water. If the radius of the vessel be 8 cm and if the water rises just upto the brim of the vessel. Find the quantity of water initially present in the vessel.
600 mm ELABOR ATE 600 mm Solve for the following buoyancy problems: 1. Water in the container is originally at a height of h = 1 m. If a block having a density of 800 kg/m3 is placed in the water, determine the new level h of the water. The base of the block is square, 600 mm by 600 mm, while the base of the container is 1.2 m by 1.2m. (1.12 m)
There are four liquids that are to be poured in a single vessel that is located in an atmosphere with g = 3.72m/s2. The first liquid is seawater (SG=1.025), the second is kerosene (ρ=1.591 slugs/ft3), the third is castor oil (SG=0.959), and the last liquid is liquid butane (unit weight = 2235.72N/m3 @ g=3.72m/s2). (a)Determine the density of seawater, the specific gravity of kerosene, the unit weight of castor oil and the density of liquid butane expressing all your answers in SI Units. (b) Illustrate the order of the liquids from the top-to-bottom of the vessel?
A tank initially contains 60 gallons of brine in which there is dissolved 8 lbs. of salt. Brine containing 2 lbs. of dissolved salt per gallon flows into the tank at the rate of 5 gal/min. The mixture is kept uniform by stirring, and the stirred mixture simultaneously flows out at the slower rate of 3 gal/min. How much salt is in the tank at any time t>0?