5b 2. Consider a server with RAID Level 3 and given Figure 2 below, determine the bit for data regeneration.0123a)b)c)e)110d)00001(Data disks)Figure 2: Server with RAID 31b)11010c)01a)0with N is the10(Parity disk)3. Suppose there are 6 data drives and they need to be stored as RAID 5, calculate how many drives are needed altogether.The drives required is determined byTherefore,drives are needed.

Note: as per guidelines we are supposed to answer only one question at a time. please repost the…

2. Consider a server with RAID Level 3 and given Figure 2 below, determine the bit for data regeneration. 0 2 3 b) c) d) e) 1 1 0 d) 0 0 0 0 1 e) (Data disks) Figure 2: Server with RAID 3 1 b) 1 1 0 1 0 c) 0 1 a) 0 1 0 0 (Parity disk) 3. Suppose there are 6 data drives and they need to be stored as RAID 5, calculate how many drives are needed altogether. The drives required is determined by with N is the drives are ne Therefore,

2. Consider a server with RAID Level 3 and given Figure 2 below, determine the bit for data regeneration. 0 2 3 b) c) d) e) 1 1 0 d) 0 0 0 0 1 e) (Data disks) Figure 2: Server with RAID 3 1 b) 1 1 0 1 0 c) 0 1 a) 0 1 0 0 (Parity disk) 3. Suppose there are 6 data drives and they need to be stored as RAID 5, calculate how many drives are needed altogether. The drives required is determined by with N is the drives are ne Therefore,

MIS

9th Edition

ISBN:9781337681919

Author:BIDGOLI

Publisher:BIDGOLI

Chapter2: Computers: The Machines Behind Computing

Section: Chapter Questions

Problem 6RD

See similar textbooks

Similar questions

For a 5,000 RPM disk, assume its average seek time is 7 msec, and it has 100 MB/sec bandwidth; assume the sector size is 512 bytes. (In this problem, MB means 1,000,000 bytes.) How long does it take to access 2,048 bytes of contiguous data on average? What is the average throughput (bytes per second) if the user accesses 512 bytes for each I/O? Assume the data is perfectly aligned on the disk. How long does it take to access 1 MB of contiguous data (on average)? What is the average throughput (bytes per second) if the user accesses 1 MB for each I/O operations? Assume the data is perfectly aligned on the disk. Suppose a user expects his or her average throughput to reach 50% of the disk’s maximum bandwidth. Find the minimum I/O size needed to achieve this.
Consider a Disk I/O transfer, in which 1500 bytes are to be transferred, but number of bytes on a track is 1000, and rotation speed of disk is 1500 rps but the average time required to move the disk arm to the required track is 15 ms, then what will be total access time?
What is the average time to read or write a 512 bytes sector for a disk? The advertised average seek time is 5 ms, the transfer rate is 40 MB/sec, it rotates at 10,000 RPM, and the controller overhead is 0.1 ms. Assume the disk is idle so that there is no queuing delay. In addition, calculate the time assuming the advertised seek time is three times longer than the measured seek time.
The disk specification in Figure 7.15 gives a data transfer rate of 60MB per second when reading from the disk, and 320MB per second when writing to the disk. Why are these numbers different? (Hint: Think about buffering.)
#There is sequence of disk track requests:75 62 99 144 50 162 110 26 198. #Assume that the disk head is initially positioned over track 100 and is moving in the direction of decreasing track number. Question: For FIFO/SSTF/SCAN/C-SCAN 1.What is the tracking order? 2What is Average Track Length?
What is the average time to read or write a 512-byte sector for a typical disk rotating at 45,000 RPM? The advertised average seek time is 2 ms, the transfer rate is 400 MB/sec, and the controller overhead is 0.2 ms. Assume that the disk is idle so that there is no waiting time.
A manufacture wishes to design a hard disk with a capacity of 60 GB or more (using thestandard definition of 1GB = 230 bytes). If the technology used to manufacture thedisks allows 512-bytes sectors, 1024 sector/track, and 60% tracks/ platter, how manyplatters are required?
What is the average time to read or write a 512-byte sector for a typical disk rotating at 15,000 RPM? The advertised average seek time is 4ms, the transfer rate is 100 MB/sec, and the controller overhead is 0.2ms. Assume that the disk is idle so that there is no waiting time. 512B sector, 15,000rpm, 4ms average seek time, 100MB/s transfer rate, 0.2ms controller overhead, idle disk
Suppose that a disk drive rotates at 8000 RPM. It has an average seek time of 4 milliseconds. If its transfer rate is 15 Mbps, determine the average time it takes for a 15K byte request to be transferred from the time the disk starts the seek? From this, determine its throughput.
Consider a single-platter disk with the following parameters: rotation speed: 7200 rpm; number of tracks on one side of platter: 30,000; number of sectors per track: 600; seek time: one ms for every hundred tracks traversed. Let the disk receive a request to access a random sector on a random track and assume the disk head starts at track 0. a. What is the average seek time? b. What is the rotational latency? c. What is the transfer time for a sector? d. What is the total average time to satisfy a request?
Consider a disk pack with 16 surfaces, 128 tracks per surface and 256 sectors per track. 512 bytes of data are stored in a bit serial manner in a sector. Calculate the capacity of the disk pack and the number of bits required to specify a particular sector in the disk.
Define the RAID levels 0, 1, and 5. If we have four 200GB disks what will be the capacity for each of thesesystems.