10-54. The smooth rigid-body cavity is filled with liquid 6061-T6 aluminum. When cooled it is 0.012 in. from the top of the cavity. If the top of the cavity is not covered and the temperature is increased by 200°F, determine the strain components E, Cy and e, in the aluminum. Hint: Use Eqs. 10-18 with an additional strain term of aAT (Eq. +4). 0.012 in in. 6 in. Probs. 10-53/54

10-54. The smooth rigid-body cavity is filled with liquid 6061-T6 aluminum. When cooled it is 0.012 in. from the top of the cavity. If the top of the cavity is not covered and the temperature is increased by 200°F, determine the strain components E, Cy and e, in the aluminum. Hint: Use Eqs. 10-18 with an additional strain term of aAT (Eq. +4). 0.012 in in. 6 in. Probs. 10-53/54

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.7.25P: On the surface of a structural component in a space vehicle, the strains arc monitored by means of...

See similar textbooks

Similar questions

P7-11. A loading causes the block to deform into the dashed shape. Explain how to determine the strains (yA)ay, (ya)ay. The angles and distances between all lettered points are known.
F8-10. The material for the 50-mm-long specimen has the stress-strain diagram shown. If P - 100 kN, determine the elongation of the specimen. a (MPa) 20 mm 500 450 e (mm/mm) 0.00225 0.03
The rectangular plate is deformed into the shape shown by the dashed lines. For a 283 and b-407. determine the normal strain along the line of AC. [103] (sign sensitive) Junit mm (not in scale) CTNL с b D-6 X-7.5811 a I 10 I
F8-11. The material for the 50-mm-long specimen has the stress-strain diagram shown. If P - 150 kN is applied and then released, determine the permanent elongation of the specimen. a (MPa) 20 mm 500 450 e (mm/mm) 0.00225 0.03
The stress-strain diagram for a bone is shown and can be described by the equation P = 0.45110-62 s + 0.36110-122 s3, where s is in kPa. Determine the modulus of toughness and the amount of elongation of a 200-mm-longregion just before it fractures if the failure occurs at P = 0.12 mm>mm.
P7-8. A loading causes the member to deform into the dashed shape. Explain how to determine the normal strains ECp and eAn. The displacement A and the lettered dimensions are known. B. -2 L-
8-21. The elastic portion of the stress-strain diagram for an aluminum alloy is shown in the figure. The specimen from which it was obtained has an original diameter of 12.7 mm and a gage length of 50.8 mm. When the applied load on the specimen is 50 kN, the diameter is 12.67494 mm. Determine Poisson's ratio for the material. (MPa) 490 (mm/mm) 0.007
8-22. The elastic portion of the stress-strain diagram for an aluminum alloy is shown in the figure. The specimen from which it was obtained has an original diameter of 12.7 mm and a gage length of 50.8 mm. If a load of P - 60 kN is applied to the specimen, determine its new diameter and length. Take v-0.35. a (MPa) 490 (mm/mm) 0.007
2. The stress-strain diagram for a bone is shown and, according to the data analysis curve fitting tool, it can be described by the equation ε = 0.45 · 10-6 +0.36 10-12³, where stress is in kPa. Determine the modulus of toughness and the amount of elongation of a 200-mm-long region just before it fractures if failure occurs at ε = 0.12 mm/mm. -€ = 0.45(106) + 0.36(10-12)³ € ↑P
The 60° strain rosette is mounted on the surface of the bracket. The following readings are obtained for each gage: Pa = -780(10-6), Pb = 400(10-6), and Pc = 500(10-6). Determine (a) the principal strains and (b) the maximumin-plane shear strain and associated average normal strain. In each case show the deformed element due to these strains.
Please
The spherical pressure vessel has an inner diameter of 2 m and a thickness of 10 mm. A strain gage having a length of 20 mm is attached to it, and it is observed to increase in length by 0.012 mm when the vessel is pressurized. Determine the pressure causing this deformation, and find the maximum in-plane shear stress, and the absolute maximum shear stress at a point on theouter surface of the vessel. The material is steel, for which Est = 200 GPa and nst = 0.3.