Question 2 - Section B: R134a is used as the refrigerant in a vapour compression refrigeration system. The compression process is assumed to be isentropic and the throttling process is assumed to be isenthalpic. Mass flow rate of the refrigerant within the cycle is 0.65 kg/s. The evaporator operates at 200 kPa and the condenser operates at 900 kPa. The cycle operates with 25 K of sub-cooling in the condenser and 30 K superheating in the evaporator. Determine: (v) the cooling load of this refrigeration cycle. (vi) the co-efficient of performance of refrigeration for this refrigeration cycle. (vii) the maximum temperature within the cycle. (viii) the power output available in Watts, if this refrigeration cycle is used as a heat pump.

The condensing pressure is 260 psig and the condenser outlet temperature is 108F for R-22. By how many degrees is the liquid subcooled in the condenser? A. 12F B. 42F C. 7F D. 14F

What are the approximate temperature ranges tor low-, medium-, and high-temperature refrigeration applications?

Four methods for controlling head pressure in an air-cooled condenser are ______, ______, _______, and

3. A vapour compression refrigeration system of 2400 kJ/min capacity works at an evaporator temperature of 263 K and a condenser temperature of 303 K. The refrigerant used is R-12 and is subcooled by 6°C before entering the expansion valve and vapour is superheated by 7°C before leaving the evaporator coil. The compression of refrigerant is reversible adiabatic. The refrigeration compressor is two-cylinder, single acting with stroke equal to 1.25 times the bore and runs at 1000 r.p.m. Determine: 1. Refrigerating effect per kg ; 2. Mass of refrigerant circulated per minute ; 3. Theoretical piston displacement per minute; 4. Power required to run the com pressor; 5. Heat removed in through condenser; and 6. Bore and stroke of the compressor.

Aa 3. A vapour compression refrigeration system of 2400 kJ/min capacity works at an evaporator temperature of 263 K and a condenser temperature of 303 K. The refrigerant used is R-12 and is subcooled by 6°C before entering the expansion valve and vapour is superheated by 7°C before leaving the evaporator coil. The compression of refrigerant is reversible adiabatic. The refrigeration compressor is two-cylinder, single acting with stroke equal to 1.25 times the bore and runs at 1000 r.p.m. Determine: 1. Refrigerating effect per kg ; 2. Mass of refrigerant circulated per minute; 3. Theoretical piston displacement per minute ; 4. Power required to run the com pressor; 5. Heat removed in through condenser ; and 6. Bore and stroke of the compressor. I want the solution on a piece of paper and using the diagram الأصدقاء المقربون

A food storage locker requires a refrigeration system of 2,400 kJ/min capacity at an evaporator temperature of -10OC and a condenser temperature of 30OC. The refrigerant used is freon-12 and sub-cooled by 6OC before entering the expansion valve and vapor is superheated by 7OC before leaving the evaporator coil. The compression of refrigerant is isentropic. The refrigeration compressor is two-cylinder, single-acting with stroke equal to 1.25 times the bore diameter and operates at 1000 rpm. Determine: (a) refrigerating effect, (b) mass of refrigerant to be circulated, (c) theoretical piston displacement per minute, (d) theoretical power to run the compressor in kW, (e) heat removed from the condenser per min. (f) theoretical bore and stroke of compressor.

A refrigerant 22 vapor compression system includes a liquid-to-suction heat exchanger in the system. The heat exchanger cools the saturated liquid from the condenser from 32 deg C to 21 deg C with vapor which comes from the evaporator at -10 deg C. The compressor is capable of pumping 20 L/sec of refrigerant. What is the enthalpy of the refrigerant at the suction of the compressor neglecting the heat exchanger? What is the isenthalpic value of the refrigerant in the system neglecting the heat exchanger? What is the refrigerant's enthalpy after compression? What is the COP of the system neglecting the heat exchanger? What is the enthalpy of the refrigerant before it enters in the expansion valve? What is the approximate enthalpy of the refrigerant at the suction of the compressor? What is the estimated enthalpy of the refrigerant after compression? What is the COP of the system? What is the refrigerating capacity of the system in TOR if: a.) without hex and b.) with hex?

Refrigerant 22 is the working fluid in a Carnot vapor refrigeration cycle for which the evaporator temperature is -30°C. Saturated vapor enters the condenser at 36°C, and saturated liquid exits at the same temperature. The mass flow rate of refrigerant is 10 kg/min. Determine the quality of refrigerant at inlet of compressor,

A vapor compression refrigeration cycle uses refrigerant-134a as its working fluid. The condenser pressure is 800 kPa and the evaporator temperature is -20 C. The compressor has an isentropic efficiency of 80 percent. The mass flow rate is 1.7489 kg/s. In the question that follows, select the answer that is closest to the true value. What is the heat going to the evaporator in units of kW?