Homework Help is Here – Start Your Trial Now!
Engineering
Civil Engineering
Only gravity loads, both dead and live floor loads, are supported by the slab. In addition to the weight of the structure, the following are the loads to be accounted for: Dead Loads: Construction Load Floor Slab Weight = 0.95 kPa To be computed Member Self-weight = To be computed Live Loads: Partition Load Occupancy Load 0.95 kPa 6.0 kPa Serviceability (NSCP C101-15 Table 424.2.2) The maximum live load deflection must not exceed 1/360 of the span length. The governing total deflection is induced by the dead load, live load, and the partition load. Applicable Load Combinations: U U 1.4D 1.2D + 1.6L == All the intermediate beams are W14 × 90. All the girders are W16 × 40, and all the columns are W12 × 58. Use A992 steel (Fy = 345 MPa and Fu- 450 MPa) for the beams, girders, columns, and steel-headed stud connectors. Assume the slab (unit weight - 23.6 kN/m³ and concrete strength fe'- 28 MPa) provides continuous lateral support of the intermediate floor beams. Use LRFD and apply NSCP 2015. A second-floor framing system of a three-story warehouse is provided as shown. The columns, girders, and beams are made of structural steel and the flooring is a 150-mm thick normal weight reinforced concrete slab. The intermediate beams spaced at s = 2.5 m supports the slab. The floor beams are supported by the girders, which in turn are supported by the columns. Use L = 15 m as spacing of columns in the N-S direction. The height of each column is H = 4.2 m. 4 equal spaces of s N T L H L A Frame GHIJ Н THI F H B E C -4s- -4s- X Y Z -4s- D Activate Windo Go to Settings to act

Only gravity loads, both dead and live floor loads, are supported by the slab. In addition to the weight of the structure, the following are the loads to be accounted for: Dead Loads: Construction Load Floor Slab Weight = 0.95 kPa To be computed Member Self-weight = To be computed Live Loads: Partition Load Occupancy Load 0.95 kPa 6.0 kPa Serviceability (NSCP C101-15 Table 424.2.2) The maximum live load deflection must not exceed 1/360 of the span length. The governing total deflection is induced by the dead load, live load, and the partition load. Applicable Load Combinations: U U 1.4D 1.2D + 1.6L == All the intermediate beams are W14 × 90. All the girders are W16 × 40, and all the columns are W12 × 58. Use A992 steel (Fy = 345 MPa and Fu- 450 MPa) for the beams, girders, columns, and steel-headed stud connectors. Assume the slab (unit weight - 23.6 kN/m³ and concrete strength fe'- 28 MPa) provides continuous lateral support of the intermediate floor beams. Use LRFD and apply NSCP 2015. A second-floor framing system of a three-story warehouse is provided as shown. The columns, girders, and beams are made of structural steel and the flooring is a 150-mm thick normal weight reinforced concrete slab. The intermediate beams spaced at s = 2.5 m supports the slab. The floor beams are supported by the girders, which in turn are supported by the columns. Use L = 15 m as spacing of columns in the N-S direction. The height of each column is H = 4.2 m. 4 equal spaces of s N T L H L A Frame GHIJ Н THI F H B E C -4s- -4s- X Y Z -4s- D Activate Windo Go to Settings to act

Structural Analysis
Structural Analysis
6th Edition
ISBN:9781337630931
Author:KASSIMALI, Aslam.
Publisher:KASSIMALI, Aslam.
Chapter2: Loads On Structures
Section: Chapter Questions
Problem 1P
See similar textbooks
icon
Related questions
Question
1. Compute the flexural design strength (kN-m) of the composite action of the girder HI. 2. Determine the effective length factor along the strong axis of the column YZ. The rigid frame shown is unbraced. Do not consider the stiffness reduction factor. Use AISC alignment charts. 3. Compute the axial design strength (kN) of the steel column YZ. Bending is about the strong axis.
Only gravity loads, both dead and live floor loads, are supported by the slab. In addition to the weight of the structure, the following are the loads to be accounted for: Dead Loads: Construction Load Floor Slab Weight = 0.95 kPa To be computed Member Self-weight = To be computed Live Loads: Partition Load Occupancy Load 0.95 kPa 6.0 kPa Serviceability (NSCP C101-15 Table 424.2.2) The maximum live load deflection must not exceed 1/360 of the span length. The governing total deflection is induced by the dead load, live load, and the partition load. Applicable Load Combinations: U U 1.4D 1.2D + 1.6L == All the intermediate beams are W14 × 90. All the girders are W16 × 40, and all the columns are W12 × 58. Use A992 steel (Fy = 345 MPa and Fu- 450 MPa) for the beams, girders, columns, and steel-headed stud connectors. Assume the slab (unit weight - 23.6 kN/m³ and concrete strength fe'- 28 MPa) provides continuous lateral support of the intermediate floor beams. Use LRFD and apply NSCP 2015.
Transcribed Image Text:Only gravity loads, both dead and live floor loads, are supported by the slab. In addition to the weight of the structure, the following are the loads to be accounted for: Dead Loads: Construction Load Floor Slab Weight = 0.95 kPa To be computed Member Self-weight = To be computed Live Loads: Partition Load Occupancy Load 0.95 kPa 6.0 kPa Serviceability (NSCP C101-15 Table 424.2.2) The maximum live load deflection must not exceed 1/360 of the span length. The governing total deflection is induced by the dead load, live load, and the partition load. Applicable Load Combinations: U U 1.4D 1.2D + 1.6L == All the intermediate beams are W14 × 90. All the girders are W16 × 40, and all the columns are W12 × 58. Use A992 steel (Fy = 345 MPa and Fu- 450 MPa) for the beams, girders, columns, and steel-headed stud connectors. Assume the slab (unit weight - 23.6 kN/m³ and concrete strength fe'- 28 MPa) provides continuous lateral support of the intermediate floor beams. Use LRFD and apply NSCP 2015.
A second-floor framing system of a three-story warehouse is provided as shown. The columns, girders, and beams are made of structural steel and the flooring is a 150-mm thick normal weight reinforced concrete slab. The intermediate beams spaced at s = 2.5 m supports the slab. The floor beams are supported by the girders, which in turn are supported by the columns. Use L = 15 m as spacing of columns in the N-S direction. The height of each column is H = 4.2 m. 4 equal spaces of s N T L H L A Frame GHIJ Н THI F H B E C -4s- -4s- X Y Z -4s- D Activate Windo Go to Settings to act
Transcribed Image Text:A second-floor framing system of a three-story warehouse is provided as shown. The columns, girders, and beams are made of structural steel and the flooring is a 150-mm thick normal weight reinforced concrete slab. The intermediate beams spaced at s = 2.5 m supports the slab. The floor beams are supported by the girders, which in turn are supported by the columns. Use L = 15 m as spacing of columns in the N-S direction. The height of each column is H = 4.2 m. 4 equal spaces of s N T L H L A Frame GHIJ Н THI F H B E C -4s- -4s- X Y Z -4s- D Activate Windo Go to Settings to act
Expert Solution
steps

Step by step

Solved in 2 steps

SEE SOLUTIONCheck out a sample Q&A here
Blurred answer
Similar questions
  • SEE MORE QUESTIONS
Recommended textbooks for you
Structural Analysis
Structural Analysis
Civil Engineering
ISBN:
9781337630931
Author:
KASSIMALI, Aslam.
Publisher:
Cengage,
Structural Analysis (10th Edition)
Structural Analysis (10th Edition)
Civil Engineering
ISBN:
9780134610672
Author:
Russell C. Hibbeler
Publisher:
PEARSON
Principles of Foundation Engineering (MindTap Cou…
Principles of Foundation Engineering (MindTap Cou…
Civil Engineering
ISBN:
9781337705028
Author:
Braja M. Das, Nagaratnam Sivakugan
Publisher:
Cengage Learning
Fundamentals of Structural Analysis
Fundamentals of Structural Analysis
Civil Engineering
ISBN:
9780073398006
Author:
Kenneth M. Leet Emeritus, Chia-Ming Uang, Joel Lanning
Publisher:
McGraw-Hill Education
Sustainable Energy
Sustainable Energy
Civil Engineering
ISBN:
9781337551663
Author:
DUNLAP, Richard A.
Publisher:
Cengage,
Traffic and Highway Engineering
Traffic and Highway Engineering
Civil Engineering
ISBN:
9781305156241
Author:
Garber, Nicholas J.
Publisher:
Cengage Learning
SEE MORE TEXTBOOKS