43. Consider a large truck carrying a heavy load, such as steel beams. A significant hazard for the driver is that the load may slide forward, crushing the cab, if the truck stops sud- denly in an accident or even in braking. Assume, for exam- ple, a 10 000-kg load sits on the flatbed of a 20 000-kg truck moving at 12.0 m/s. Assume the load is not tied down to the truck and has a coefficient of static friction of 0.500 with the truck bed. (a) Calculate the minimum stopping distance for which the load will not slide forward relative to the truck. (b) Is any piece of data unnecessary for the solution?

43. Consider a large truck carrying a heavy load, such as steel beams. A significant hazard for the driver is that the load may slide forward, crushing the cab, if the truck stops sud- denly in an accident or even in braking. Assume, for exam- ple, a 10 000-kg load sits on the flatbed of a 20 000-kg truck moving at 12.0 m/s. Assume the load is not tied down to the truck and has a coefficient of static friction of 0.500 with the truck bed. (a) Calculate the minimum stopping distance for which the load will not slide forward relative to the truck. (b) Is any piece of data unnecessary for the solution?

Name: 43. as steelbeams. A significant hazard for the driver is that the lo
Uploaded: 2024-03-20T06:57:37.000Z
Channel: Bartleby
Description: 43. as steelbeams. A significant hazard for the driver is that the loadmay slide forward, crushing the cab, if the truck stops sud-denly in an accident or even in braking. Assume, for exam-ple, a 10 000-kg load sits on the flatbed of a 20 000-kg tru

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter6: Applications Of Newton's Laws

Section: Chapter Questions

Problem 58P: Calculate the maximum acceleration of a car that is heading up a 4.00slope (one that makes an angle...

See similar textbooks

Similar questions

A person doing a chin-up weighs 700 N, exclusive of the arms. During the first 25.0 cm of the lift, each arm exerts an upward force of 355 N on the torso. If the upward movement starts from rest, what is the persons velocity at that point?
As shown below, if F=60.0Nand M=4.00kg, what is the magnitude of the acceleration of the suspended object? All surfaces are frictionless.
Why can a squirrel from a tree branch to the ground and run away undamaged, while a human could break a bone in such a fall?
Two forces are acting on a 5.0-kg object that moves with acceleration 2.0m/s2 in the positive y -direction. If one of the forces acts in the positive x -direction and has magnitude of 12 N, what is the magnitude of the other?
Two blocks connected by a string are pulled across a horizontal surface by a force applied to one of the blocks, as shown below. The coefficient of kinetic friction between the blocks and the surface is 0.25. If each block has an acceleration of 2.0m/s2to the right, what is the magnitude Fof the applied force?
In Figure 5.12, the net external force on the 24-kg mower is given as 51 N. If the force of friction opposing the motion is 24 N, what force F(in newtons) is the person exerting on the mower? Suppose the mower is moving at 1.5 m/s when the force Fis removed. How far will the mower go before stopping?
Consider Figure 5.28. The driver attempts to get the car out of the mud by exerting a perpendicular force of 610.0 N, and the distance she pushes in the middle of the rope is 1.00 m while she stands 6.00 m away from the car on the left and 6.00 m away from the tree on the right. What is the tension Tin the rope, and how do you find the answer?
A skydiver is at an altitude of 1520 m. After 10.0 seconds of free fall, he opens his parachute and finds that the air resistance, FD , is given by the formula FD=bv , where bis a constant and vis the velocity. If b=0.750 , and the mass of the skydiver is 82.0 kg, first set up differential equations for the velocity and the position, and then find: (a) the speed of the skydiver when the parachute opens, (b) the distance fallen before the parachute opens, (c) the terminal velocity after the parachute opens (find the limiting velocity), and (d) the time the skydiver is in the air after the parachute opens.
A 45.0-kg crate of tools rests on a horizontal floor. You exert a gradually increasinghorizontal push on it and observe that the crate just begins to move when your forceexceeds 313 N. After that you must reduce your push to 208 N to keep it moving at asteady 25.0 cm/s. (a) What are the coefficients of static and kinetic friction between thecrate and the floor. (b) what push must you exert to give it an acceleration of 1.10 m/s2 ?
23. Two identical boxes are being pulled across a horizontal fl oor at aconstant velocity by a horizontal pulling force of 176 N that is applied toone of the boxes, as the drawing shows. There is kinetic friction betweeneach box and the fl oor. Find the tension in the rope between the boxes.
You are climbing on a hill that is inclined at 15degrees with the horizontal and you wish tobuild a rope tow to pull yourself up. Ignoring friction, calculate the tension you needed on therope to give your body that has a mass of 45kg a 1.5 m/s^2 acceleration. What if you are toconsider the friction of 100N, what is the value of the tension and coefficient of friction?
3) A truck is moving down a 10° incline. The driver strongly applies the brakes to avoid a collision and the truck decelerates at the steady rate of 1 m/s². If the static coefficient of friction between the load W and the truck is 0.3, will the load slide or remain stationary relative to the truck trailer? The weight of Wis 4500 N and is not held to the truck by cables. 500 N blogl 4 which c wwww.